Cross-brand designation analysis
COMPARE / VERIFY
Same-model Comparison
Explore products that share a base designation across loaded brands, with dimensional agreement and data gaps shown clearly.
Automatic candidate selection
One base designation across loaded brands
Exact designations rank first. Dimensions, suffixes and other technical differences remain visible so the result is not mistaken for an interchangeability declaration.
Data incomplete
“UCP214” across 2 loaded brands
The base designation is shared, but too few brands have complete boundary dimensions. Use Custom Compare when you want to choose exact suffix variants yourself.
Technical comparison
Choose exact variants instead →Brand differences at a glance
| Parameter | FAGUCP21470 × 266 × 157 mm | KOYOUCP21470 × × 74.6 mm |
|---|---|---|
| Comparable specifications | ||
| Brand | FAG | KOYO |
| Designation | UCP214 | UCP214 |
| Product family | — | Pillow block type / Set screw locking |
| Detailed type | Plummer block housing units | Ball bearing units |
| Bore diameterd | 70 mm | 70 mm |
| Outside diameterD | 266 mm | — |
| WidthB | 157 mm | 74.6 mm |
| HeightH | — | 79.4 mm |
| Basic dynamic load ratingC | — | 62.2 kN |
| Basic static load ratingC0 | — | 44.1 kN |
| Fatigue load limitPu | — | 2.01 kN |
| Mass≈m | 6.1 kg | — |
| Bearing material | GG — Grey cast iron | — |
| Additional information | ||
| Housing | P214 | — |
| Bearing designation | UC214 | — |
| Classification | ||
| Official Category Path | — | Ball bearing units - Pillow block type - Set screw locking |
| Official Classification 1 | — | Ball bearing units / Pillow block type / Set screw locking |
| Dimensions | ||
| Distance shaft axisH | 79.4 mm | — |
| Distance shaft axisH | 3.126 in | — |
| Width (base)A | 72 mm | — |
| Width (base)A | 2.835 in | — |
| Height (base)H1 | 27 mm | — |
| Height (base)H1 | 1.063 in | — |
| Distance of raceway to locking collarS1 | 44.4 mm | — |
| Distance of raceway to locking collarS1 | 1.748 in | — |
| Connection thread for lubricationQ | M6 | — |
| Main Dimensions & Performance Data | ||
| Length totalL | 266 mm | — |
| Length totalL | 10.472 in | — |
| Basic dynamic load rating, radialCr | 66,000 N | — |
| Basic dynamic load rating, radialCr | 14,838.129 lbf | — |
| Basic static load rating, radialC0r | 44,000 N | — |
| Basic static load rating, radialC0r | 9,892.086 lbf | — |
| Fatigue load limit, radialCur | 2,300 N | — |
| Fatigue load limit, radialCur | 517.086 lbf | — |
| Manufacturer Identity | ||
| Schaeffler Product Code | 401593 | — |
| Official Class Key | — | 100-010-010 |
| Base Type | UCP214 | — |
| Gpsd Group | S04 | — |
| Product Line Id | 72 | — |
| SAP material number | 0812172500000 | — |
| Base product | 2305160101 | — |
| Bearing X designation | UCP214-J7 | — |
| Mounting Manager ID | UCP214-J7 | — |
| Grease application ID | UCP214-J7 | — |
| Mounting dimensions | ||
| Distance fixing boreJ | 210 mm | — |
| Distance fixing boreJ | 8.268 in | — |
| Width (slot)N | 25 mm | — |
| Width (slot)N | 0.984 in | — |
| Length (slot)N1 | 31 mm | — |
| Length (slot)N1 | 1.22 in | — |
| Product characteristics | ||
| MaterialGG | Grey cast iron | — |
| Housing clearanceJ7 | Normal swivel torque | — |
| Product Identity | ||
| Construction | Plummer block housing units UCP, cast iron housing, with long base, radial insert ball bearing with grub screws in inner ring, RSR seals | — |
| Short Description | Plummer block housing unit | — |
| Technical Data | ||
| d | — | 70 mm |
| H | — | 79.4 mm |
| L | — | 266 mm |
| Width (B) | 157 mm | — |
| A | — | 72 mm |
| Outside Diameter (D) | 266 mm | — |
| J | — | 210 mm |
| Bore Diameter (D) | 70 mm | — |
| N | — | 25 mm |
| N1 | — | 30 mm |
| H1 | — | 27 mm |
| H2 | — | 157 mm |
| L1 | — | 75 mm |
| B | — | 74.6 mm |
| S | — | 30.2 mm |
| Bolt Size | — | M20 |
| Basic Load Ratings : Cr | — | 62.2 kN |
| Basic Load Ratings : C0R | — | 44.1 kN |
| Fatigue Load Limit : Cu | — | 2.01 kN |
| Factor : F0 | — | 14.5 |
| Nipple Size | — | R1/8 |
| Temperature range | ||
| Operating temperature min.Tmin | -20 °C | — |
| Operating temperature min.Tmin | -4 °F | — |
| Operating temperature max.Tmax | 120 °C | — |
| Operating temperature max.Tmax | 248 °F | — |
Automatic matching is a search aid, not an interchangeability declaration. Confirm the full suffix, tolerances, internal design and application limits before substitution.