Cross-brand designation analysis
COMPARE / VERIFY
Same-model Comparison
Explore products that share a base designation across loaded brands, with dimensional agreement and data gaps shown clearly.
Automatic candidate selection
One base designation across loaded brands
Exact designations rank first. Dimensions, suffixes and other technical differences remain visible so the result is not mistaken for an interchangeability declaration.
Data incomplete
“UCP213” across 2 loaded brands
The base designation is shared, but too few brands have complete boundary dimensions. Use Custom Compare when you want to choose exact suffix variants yourself.
Technical comparison
Choose exact variants instead →Brand differences at a glance
| Parameter | FAGUCP21365 × 265 × 151 mm | KOYOUCP21365 × × 65.1 mm |
|---|---|---|
| Comparable specifications | ||
| Brand | FAG | KOYO |
| Designation | UCP213 | UCP213 |
| Product family | — | Pillow block type / Set screw locking |
| Detailed type | Plummer block housing units | Ball bearing units |
| Bore diameterd | 65 mm | 65 mm |
| Outside diameterD | 265 mm | — |
| WidthB | 151 mm | 65.1 mm |
| HeightH | — | 76.2 mm |
| Basic dynamic load ratingC | — | 57.2 kN |
| Basic static load ratingC0 | — | 40.1 kN |
| Fatigue load limitPu | — | 1.82 kN |
| Mass≈m | 5.55 kg | — |
| Bearing material | GG — Grey cast iron | — |
| Additional information | ||
| Housing | P213 | — |
| Bearing designation | UC213 | — |
| Classification | ||
| Official Category Path | — | Ball bearing units - Pillow block type - Set screw locking |
| Official Classification 1 | — | Ball bearing units / Pillow block type / Set screw locking |
| Dimensions | ||
| Distance shaft axisH | 76.2 mm | — |
| Distance shaft axisH | 3 in | — |
| Width (base)A | 70 mm | — |
| Width (base)A | 2.756 in | — |
| Height (base)H1 | 27 mm | — |
| Height (base)H1 | 1.063 in | — |
| Distance of raceway to locking collarS1 | 39.7 mm | — |
| Distance of raceway to locking collarS1 | 1.563 in | — |
| Connection thread for lubricationQ | M6 | — |
| Main Dimensions & Performance Data | ||
| Length totalL | 265 mm | — |
| Length totalL | 10.433 in | — |
| Basic dynamic load rating, radialCr | 61,000 N | — |
| Basic dynamic load rating, radialCr | 13,714.029 lbf | — |
| Basic static load rating, radialC0r | 40,000 N | — |
| Basic static load rating, radialC0r | 8,992.806 lbf | — |
| Fatigue load limit, radialCur | 2,090 N | — |
| Fatigue load limit, radialCur | 469.874 lbf | — |
| Manufacturer Identity | ||
| Schaeffler Product Code | 401587 | — |
| Official Class Key | — | 100-010-010 |
| Base Type | UCP213 | — |
| Gpsd Group | S04 | — |
| Product Line Id | 72 | — |
| X Life Marking | n.r. | — |
| SAP material number | 0812169200000 | — |
| Base product | 2305160101 | — |
| Bearing X designation | UCP213-J7 | — |
| Mounting Manager ID | UCP213-J7 | — |
| Grease application ID | UCP213-J7 | — |
| Mounting dimensions | ||
| Distance fixing boreJ | 203 mm | — |
| Distance fixing boreJ | 7.992 in | — |
| Width (slot)N | 25 mm | — |
| Width (slot)N | 0.984 in | — |
| Length (slot)N1 | 29 mm | — |
| Length (slot)N1 | 1.142 in | — |
| Product characteristics | ||
| MaterialGG | Grey cast iron | — |
| Housing clearanceJ7 | Normal swivel torque | — |
| Product Identity | ||
| Construction | Plummer block housing units UCP, cast iron housing, with long base, radial insert ball bearing with grub screws in inner ring, RSR seals | — |
| Short Description | Plummer block housing unit | — |
| Technical Data | ||
| d | — | 65 mm |
| H | — | 76.2 mm |
| L | — | 265 mm |
| A | — | 70 mm |
| J | — | 203 mm |
| Width (B) | 151 mm | — |
| N | — | 25 mm |
| Outside Diameter (D) | 265 mm | — |
| N1 | — | 30 mm |
| Bore Diameter (D) | 65 mm | — |
| H1 | — | 27 mm |
| H2 | — | 150 mm |
| L1 | — | 78 mm |
| B | — | 65.1 mm |
| S | — | 25.4 mm |
| Bolt Size | — | M20 |
| Basic Load Ratings : Cr | — | 57.2 kN |
| Basic Load Ratings : C0R | — | 40.1 kN |
| Fatigue Load Limit : Cu | — | 1.82 kN |
| Factor : F0 | — | 14.4 |
| Nipple Size | — | R1/8 |
| Temperature range | ||
| Operating temperature min.Tmin | -20 °C | — |
| Operating temperature min.Tmin | -4 °F | — |
| Operating temperature max.Tmax | 120 °C | — |
| Operating temperature max.Tmax | 248 °F | — |
Automatic matching is a search aid, not an interchangeability declaration. Confirm the full suffix, tolerances, internal design and application limits before substitution.