Cross-brand designation analysis
COMPARE / VERIFY
Same-model Comparison
Explore products that share a base designation across loaded brands, with dimensional agreement and data gaps shown clearly.
Automatic candidate selection
One base designation across loaded brands
Exact designations rank first. Dimensions, suffixes and other technical differences remain visible so the result is not mistaken for an interchangeability declaration.
Dimensions verified
“SCE1210” across 2 loaded brands
At least two brands share the same bore, outside diameter and width. Use Custom Compare when you want to choose exact suffix variants yourself.
Technical comparison
Choose exact variants instead →Brand differences at a glance
| Parameter | FAGSCE1210-B-M/0119.05 × 25.4 × 15.875 mm | INASCE121019.05 × 25.4 × 15.875 mm |
|---|---|---|
| Comparable specifications | ||
| Brand | FAG | INA |
| Designation | SCE1210-B-M/01 | SCE1210 |
| Detailed type | Drawn cup needle roller bearing open end | Drawn cup needle roller bearing open end |
| Series | SCE1210 | — |
| Bore diameterd | 19.05 mm | 19.05 mm |
| Outside diameterD | 25.4 mm | 25.4 mm |
| WidthB | 15.875 mm | 15.875 mm |
| Basic dynamic load ratingC | 12.8 kN | 12.8 kN |
| Basic static load ratingC0 | 17.5 kN | 17.5 kN |
| Limiting speednG | 13100 r/min | 13100 r/min |
| Mass≈m | 0.018 kg | 0.0172 kg |
| Sealing | Without | — |
| Lubricant | Without | — |
| Minimum operating temperatureTmin | -30 °C | -30 °C |
| Maximum operating temperatureTmax | 140 °C | 140 °C |
| Main Dimensions & Performance Data | ||
| Under roller diameterFw | 19.05 mm | — |
| Under roller diameterFw | 0.75 in | — |
| Basic dynamic load rating, radialCr | 12,800 N | — |
| Basic dynamic load rating, radialCr | 2,877.698 lbf | — |
| Basic static load rating, radialC0r | 17,500 N | — |
| Basic static load rating, radialC0r | 3,934.353 lbf | — |
| Manufacturer Identity | ||
| Schaeffler Product Code | 898003 | 382101 |
| Base Type | SCE1210 | SCE1210 |
| Gpsd Group | I01 | I01 |
| Product Line Id | 09 | 09 |
| SAP material number | 0928023039001 | — |
| Base product | 2305090501 | — |
| Product characteristics | ||
| Lubrication hole | Without | — |
| Coating | Without | — |
| Type of Seal | Without | — |
| Product Identity | ||
| Construction | Drawn cup needle roller bearings with open ends, to ABMA 18.2 - 1982, inch sizes | Drawn cup needle roller bearings with open ends, to ABMA 18.2 - 1982, inch sizes |
| Short Description | Drawn cup needle roller bearing open end | Drawn cup needle roller bearing open end |
| Technical Data | ||
| Under Roller Diameter (Fw) | 19.05 mm | 19.05 mm |
| Outside Diamater (D) | 25.4 mm | 25.4 mm |
| Width (C) | 15.875 mm | 15.875 mm |
| Basic Dynamic Load Rating, Radial (Cr) | 12,800 N | 12,800 N |
| Basic Static Load Rating, Radial (C0R) | 17,500 N | 17,500 N |
| Operating Temperature Min. (Tmin) | -30 °C | -30 °C |
| Operating Temperature Max. (Tmax) | 140 °C | 140 °C |
| Limiting Speed (Limiting Spe) | 13,100 1/min | 13,100 1/min |
| Temperature range | ||
| Operating temperature min.Tmin | -30 °C | — |
| Operating temperature min.Tmin | -22 °F | — |
| Operating temperature max.Tmax | 140 °C | — |
| Operating temperature max.Tmax | 284 °F | — |
Automatic matching is a search aid, not an interchangeability declaration. Confirm the full suffix, tolerances, internal design and application limits before substitution.