Same-model Comparison
Explore products that share a base designation across loaded brands, with dimensional agreement and data gaps shown clearly.
Cross Reference centre · Interchange verification checklist · Understand suffix differences
You entered SCE1210-B-M-01. This table explores the base group SCE1210; it does not preserve or approve every requested suffix. Search your complete marking first →
One base designation across loaded brands
Exact designations rank first. Dimensions, suffixes and other technical differences remain visible so the result is not mistaken for an interchangeability declaration.
“SCE1210” across 2 loaded brands
At least two brands share the same bore, outside diameter and width. Use Custom Compare when you want to choose exact suffix variants yourself.
Brand differences at a glance
| Parameter | FAGSCE1210-B-M/0119.05 × 25.4 × 15.875 mm | INASCE121019.05 × 25.4 × 15.875 mm |
|---|---|---|
| Comparable specifications | ||
| Brand | FAG | INA |
| Designation | SCE1210-B-M/01 | SCE1210 |
| Detailed type | Drawn cup needle roller bearing open end | Drawn cup needle roller bearing open end |
| Series | SCE1210 | — |
| Bore diameterd | 19.05 mm | 19.05 mm |
| Outside diameterD | 25.4 mm | 25.4 mm |
| WidthB | 15.875 mm | 15.875 mm |
| Basic dynamic load ratingC | 12.8 kN | 12.8 kN |
| Basic static load ratingC0 | 17.5 kN | 17.5 kN |
| Limiting speednG | 13100 r/min | 13100 r/min |
| Mass≈m | 0.018 kg | 0.0172 kg |
| Sealing | Without | — |
| Lubricant | Without | — |
| Minimum operating temperatureTmin | -30 °C | -30 °C |
| Maximum operating temperatureTmax | 140 °C | 140 °C |
| Main Dimensions & Performance Data | ||
| Under roller diameterFw | 19.05 mm | — |
| Under roller diameterFw | 0.75 in | — |
| Basic dynamic load rating, radialCr | 12,800 N | — |
| Basic dynamic load rating, radialCr | 2,877.698 lbf | — |
| Basic static load rating, radialC0r | 17,500 N | — |
| Basic static load rating, radialC0r | 3,934.353 lbf | — |
| Manufacturer Identity | ||
| Schaeffler Product Code | 898003 | 382101 |
| Base Type | SCE1210 | SCE1210 |
| Gpsd Group | I01 | I01 |
| Product Line Id | 09 | 09 |
| SAP material number | 0928023039001 | — |
| Base product | 2305090501 | — |
| Product characteristics | ||
| Lubrication hole | Without | — |
| Coating | Without | — |
| Type of Seal | Without | — |
| Product Identity | ||
| Construction | Drawn cup needle roller bearings with open ends, to ABMA 18.2 - 1982, inch sizes | Drawn cup needle roller bearings with open ends, to ABMA 18.2 - 1982, inch sizes |
| Short Description | Drawn cup needle roller bearing open end | Drawn cup needle roller bearing open end |
| Technical Data | ||
| Under Roller Diameter (Fw) | 19.05 mm | 19.05 mm |
| Outside Diamater (D) | 25.4 mm | 25.4 mm |
| Width (C) | 15.875 mm | 15.875 mm |
| Basic Dynamic Load Rating, Radial (Cr) | 12,800 N | 12,800 N |
| Basic Static Load Rating, Radial (C0R) | 17,500 N | 17,500 N |
| Operating Temperature Min. (Tmin) | -30 °C | -30 °C |
| Operating Temperature Max. (Tmax) | 140 °C | 140 °C |
| Limiting Speed (Limiting Spe) | 13,100 1/min | 13,100 1/min |
| Temperature range | ||
| Operating temperature min.Tmin | -30 °C | — |
| Operating temperature min.Tmin | -22 °F | — |
| Operating temperature max.Tmax | 140 °C | — |
| Operating temperature max.Tmax | 284 °F | — |
Automatic matching is a search aid, not an interchangeability declaration. Confirm the full suffix, tolerances, internal design and application limits before substitution.