Cross-brand designation analysis
COMPARE / VERIFY
Same-model Comparison
Explore products that share a base designation across loaded brands, with dimensional agreement and data gaps shown clearly.
Automatic candidate selection
One base designation across loaded brands
Exact designations rank first. Dimensions, suffixes and other technical differences remain visible so the result is not mistaken for an interchangeability declaration.
Data incomplete
“R32010” across 2 loaded brands
The base designation is shared, but too few brands have complete boundary dimensions. Use Custom Compare when you want to choose exact suffix variants yourself.
Technical comparison
Choose exact variants instead →Brand differences at a glance
| Parameter | SKFR 32010 X/QVU100550 × × mm | FAGR32010-X50 × × mm |
|---|---|---|
| Comparable specifications | ||
| Brand | SKF | FAG |
| Designation | R 32010 X/QVU1005 | R32010-X |
| Product family | Tapered roller bearings | — |
| Detailed type | Single row tapered roller bearing, cone | Tapered roller bearings |
| Series | — | R32010 |
| Bore diameterd | 50 mm | 50 mm |
| Basic dynamic load ratingC | 60.5 kN | 64 kN |
| Basic static load ratingC0 | 88 kN | 93 kN |
| Fatigue load limitPu | — | 11.4 kN |
| Reference speednref | — | 5000 r/min |
| Limiting speednG | — | 8700 r/min |
| Mass≈m | 0.267 kg | 0.279 kg |
| Precision class | — | P6X — Class 6X (ISO 492:2023) |
| Sealing | Without | — |
| Cage | Sheet metal | Standard — Sheet steel cage, window cage, roller-guided |
| Lubricant | None | — |
| Minimum operating temperatureTmin | — | -30 °C |
| Maximum operating temperatureTmax | — | 120 °C |
| Additional information | ||
| Comparative designation to ISO 10317 and ISO 355 | — | T3CC050 |
| Calculation factors | ||
| Limiting value of Fa/Fr for the applicability of diff. Values of factors X and Ye | — | 0.42 |
| Dynamic axial load factorY | — | 1.42 |
| Static axial load factorY0 | — | 0.78 |
| Capabilities & suitability | ||
| Radial load capacity | — | Yes |
| Axial load capacity in one direction | — | Yes |
| Suitable for grease lubrication | — | Yes |
| Suitable for oil lubrication | — | Yes |
| Unsealed design | — | Yes |
| Dimensions | ||
| Width, total | 20.0 mm | — |
| Width, inner ring | 20.0 mm | — |
| Minimum chamfer dimension of inner ring back facer1, 2 min | — | 1 mm |
| Minimum chamfer dimension of inner ring back facer1, 2 min | — | 0.039 in |
| Distance between the apexes of the pressure conesa | — | 18 mm |
| Distance between the apexes of the pressure conesa | — | 0.709 in |
| Guidance rib diameter of inner ringd1 | — | 67.5 mm |
| Guidance rib diameter of inner ringd1 | — | 2.657 in |
| Outer envelope circleEw | — | 79.122 mm |
| Outer envelope circleEw | — | 3.115 in |
| Contact angleα | — | 15.75 ° |
| Logistics | ||
| Product net weight | 0.267 kg | — |
| eClass code | 23-05-09-10 | — |
| UNSPSC code | 31171516 | — |
| Main Dimensions & Performance Data | ||
| Width, inner ringB | — | 20 mm |
| Width, inner ringB | — | 0.787 in |
| Basic dynamic load rating, radialCr | — | 64,000 N |
| Basic dynamic load rating, radialCr | — | 14,388.489 lbf |
| Basic static load rating, radialC0r | — | 93,000 N |
| Basic static load rating, radialC0r | — | 20,908.273 lbf |
| Fatigue load limit, radialCur | — | 11,400 N |
| Fatigue load limit, radialCur | — | 2,562.95 lbf |
| Thermal speed ratingnϑr | — | 5,000 1/min |
| Manufacturer Identity | ||
| Schaeffler Product Code | — | 1850511 |
| Base Type | — | R32010 |
| Gpsd Group | — | F04 |
| Product Line Id | — | 36 |
| SAP material number | — | 0390801530000 |
| Base product | — | 2305091003 |
| Mounting Manager ID | — | R32010-X |
| Mounting dimensions | ||
| Maximum diameter of shaft shoulderda max | — | 56 mm |
| Maximum diameter of shaft shoulderda max | — | 2.205 in |
| Minimum diameter of shaft shoulderdb min | — | 56 mm |
| Minimum diameter of shaft shoulderdb min | — | 2.205 in |
| Minimum axial spaceCRa min | — | 4 mm |
| Minimum axial spaceCRa min | — | 0.157 in |
| Maximum axial spaceCRb max | — | 0 mm |
| Maximum axial spaceCRb max | — | 0 in |
| Maximum fillet radius of shaftra max | — | 1 mm |
| Maximum fillet radius of shaftra max | — | 0.039 in |
| Product characteristics | ||
| Tolerance classP6X | — | Class 6X (ISO 492:2023) |
| Heat treatment | — | Standard |
| Quality level | — | Standard |
| Number of rows1 | — | Single-row design |
| Product identity | ||
| Official product category | Tapered roller bearings | — |
| Official taxonomy path | /products/rolling-bearings/roller-bearings/tapered-roller-bearings/single-row-tapered-roller-bearings | — |
| Available from SKF | Yes | — |
| Remanufacturable | No | — |
| Product Identity | ||
| Construction | — | Tapered roller bearings without outer ring (Cone) 320, main dimensions acc. to DIN 720 |
| Short Description | — | Tapered roller bearing |
| Properties | ||
| Bearing part | Inner ring, cage and roller assembly (cone assembly) | — |
| Arrangement of contact angle (double-row bearing) | Not applicable | — |
| Matched arrangement | No | — |
| Coating | Without | — |
| Relubrication feature | Without | — |
| Indicative carbon footprint for new product | 0.99 kg CO 2 e | — |
| Technical Data | ||
| Bore Diameter (D) | — | 50 mm |
| Basic Dynamic Load Rating, Radial (Cr) | — | 64,000 N |
| Basic Static Load Rating, Radial (C0R) | — | 93,000 N |
| Operating Temperature Min. (Tmin) | — | -30 °C |
| Limiting Speed (Ng) | — | 8,700 1/min |
| Operating Temperature Max. (Tmax) | — | 120 °C |
| Reference Speed (Nϑr) | — | 5,000 1/min |
| Contact Angle (Α) | — | 15.75 ° |
| Fatigue Load Limit, Radial (Cur) | — | 11,400 N |
| Limiting Value Of Fa/Fr For The Applicability Of Diff. Values Of Factors X And Y (E) | — | 0.42 |
| Maximum Diameter Of Shaft Shoulder (Da Max) | — | 56 mm |
| Minimum Diameter Of Shaft Shoulder (Db Min) | — | 56 mm |
| Dynamic Axial Load Factor (Y) | — | 1.42 |
| Maximum Fillet Radius (Ra Max) | — | 1 mm |
| Maximum Axial Space (Crb Max) | — | 0 mm |
| Minimum Chamfer Dimension Of Inner Ring Back Face (R1, 2 M) | — | 1 mm |
| Guidance Rib Diameter Of Inner Ring (D1) | — | 67.5 mm |
| Minimum Axial Space (Cra Min) | — | 4 mm |
| Width, Inner Ring (B) | — | 20 mm |
| Static Axial Load Factor (Y0) | — | 0.78 |
| Distance Between The Apexes Of The Pressure Cones (A) | — | 18 mm |
| Temperature range | ||
| Operating temperature min.Tmin | — | -30 °C |
| Operating temperature min.Tmin | — | -22 °F |
| Operating temperature max.Tmax | — | 120 °C |
| Operating temperature max.Tmax | — | 248 °F |
Automatic matching is a search aid, not an interchangeability declaration. Confirm the full suffix, tolerances, internal design and application limits before substitution.