Cross-brand designation analysis
COMPARE / VERIFY
Same-model Comparison
Explore products that share a base designation across loaded brands, with dimensional agreement and data gaps shown clearly.
Cross Reference centre · Interchange verification checklist · Understand suffix differences
You entered QJ1244-N2-MPA. This table explores the base group QJ1244; it does not preserve or approve every requested suffix. Search your complete marking first →
Automatic candidate selection
One base designation across loaded brands
Exact designations rank first. Dimensions, suffixes and other technical differences remain visible so the result is not mistaken for an interchangeability declaration.
Dimensions verified
“QJ1244” across 2 loaded brands
At least two brands share the same bore, outside diameter and width. Use Custom Compare when you want to choose exact suffix variants yourself.
Technical comparison
Choose exact variants instead →Brand differences at a glance
| Parameter | SKFQJ 1244 N2MA220 × 400 × 78 mm | FAGQJ1244-MPA220 × 400 × 78 mm |
|---|---|---|
| Comparable specifications | ||
| Brand | SKF | FAG |
| Designation | QJ 1244 N2MA | QJ1244-MPA |
| Product family | Angular contact ball bearings | — |
| Detailed type | Four-point contact ball bearing with locating slots | Four-point contact bearing |
| Series | — | QJ1244 |
| Bore diameterd | 220 mm | 220 mm |
| Outside diameterD | 400 mm | 400 mm |
| WidthB | 78 mm | 78 mm |
| Basic dynamic load ratingC | 592 kN | 570 kN |
| Basic static load ratingC0 | 1020 kN | 980 kN |
| Fatigue load limitPu | 24.5 kN | 32 kN |
| Reference speednref | — | 1600 r/min |
| Limiting speednG | 2600 r/min | 2850 r/min |
| Mass≈m | 45 kg | 37.6 kg |
| Precision class | — | PN — Normal (ISO 492:2023) |
| Sealing | Without | — |
| Cage | Machined brass | MPA — Solid brass cage, outer ring guided |
| Bearing material | Bearing steel | — |
| Lubricant | None | — |
| Minimum operating temperatureTmin | — | -30 °C |
| Maximum operating temperatureTmax | — | 200 °C |
| Capabilities & suitability | ||
| Radial load capacity | — | Yes |
| Axial load capacity in one direction | — | Yes |
| Axial load capacity in both directions | — | Yes |
| Suitable for grease lubrication | — | Yes |
| Suitable for oil lubrication | — | Yes |
| Unsealed design | — | Yes |
| Largebearing | — | Yes |
| Dimensions | ||
| Contact angle | 45.0 ° | — |
| Minimum chamfer dimensionrmin | — | 4 mm |
| Minimum chamfer dimensionrmin | — | 0.157 in |
| Shoulder diameter outer ringD1 | — | 330.1 mm |
| Shoulder diameter outer ringD1 | — | 12.996 in |
| Shoulder diameter inner ringd1 | — | 287.8 mm |
| Shoulder diameter inner ringd1 | — | 11.331 in |
| Distance between the apexes of the pressure conesa | — | 310 mm |
| Distance between the apexes of the pressure conesa | — | 12.205 in |
| Contact angleα | — | 45 ° |
| Engineering — Abutment dimensions | ||
| Abutment diameter shaftd a | min. 238 mm | — |
| Abutment diameter housingD a | max. 382 mm | — |
| Fillet radiusr a | max. 3 mm | — |
| Engineering — Calculation data | ||
| Calculation factorA | 6.5 | — |
| Limiting valuee | 1.3 | — |
| Calculation factorX | 0.54 | — |
| Calculation factorY 0 | 0.44 | — |
| Calculation factorY 1 | 0.47 | — |
| Calculation factorY 2 | 0.81 | — |
| Engineering — Dimensions | ||
| Shoulder diameter inner ringd 1 | ≈ 287 mm | — |
| Shoulder diameter outer ring/ inner diameter housing washerD 1 | ≈ 333 mm | — |
| Distance pressure point(s)a | 310 mm | — |
| Locating slot depth outer ringh | 12.7 mm | — |
| Locating slot width outer ringb | 10.55 mm | — |
| Corner radius locating slotr 0 | 2 mm | — |
| Chamfer dimension inner ringr 1,2 | min. 4 mm | — |
| Logistics | ||
| Product net weight | 45.0 kg | — |
| eClass code | 23-05-08-05 | — |
| UNSPSC code | 31171538 | — |
| Main Dimensions & Performance Data | ||
| Basic dynamic load rating, radialCr | — | 570,000 N |
| Basic dynamic load rating, radialCr | — | 128,147.482 lbf |
| Basic static load rating, radialC0r | — | 980,000 N |
| Basic static load rating, radialC0r | — | 220,323.741 lbf |
| Fatigue load limit, radialCur | — | 32,000 N |
| Fatigue load limit, radialCur | — | 7,194.245 lbf |
| Manufacturer Identity | ||
| Schaeffler Product Code | — | 366470 |
| Base Type | — | QJ1244 |
| Old Designation | — | ["QJ1244MPA"] |
| Gpsd Group | — | S03 |
| Product Line Id | — | 14 |
| SAP material number | — | 0192600240000 |
| Base product | — | 230508AD41 |
| Bearing X designation | — | QJ1244-MPA |
| Mounting Manager ID | — | QJ1244-MPA |
| Grease application ID | — | QJ1244-MPA |
| Mounting dimensions | ||
| Minimum diameter shaft shoulderda min | — | 237 mm |
| Minimum diameter shaft shoulderda min | — | 9.331 in |
| Maximum diameter of housing shoulderDa max | — | 383 mm |
| Maximum diameter of housing shoulderDa max | — | 15.079 in |
| Maximum fillet radiusra max | — | 3 mm |
| Maximum fillet radiusra max | — | 0.118 in |
| Product characteristics | ||
| Tolerance classPN | — | Normal (ISO 492:2023) |
| Dimensional / heat stabilizationS1 | — | Rings dimensional stabilized up to 200° |
| Axial internal clearanceCN | — | Group N (CN) |
| Product identity | ||
| Official product category | Angular contact ball bearings | — |
| Official taxonomy path | /products/rolling-bearings/ball-bearings/angular-contact-ball-bearings/four-point-contact-ball-bearings | — |
| Structure group ID | BAQ_001 | — |
| Available from SKF | Yes | — |
| Remanufacturable | Yes | — |
| Product Identity | ||
| Construction | — | Four point contact bearing QJ12..-MPA, solid brass cage |
| Short Description | — | Four-point contact bearing |
| Properties | ||
| Contact type | Four-point contact | — |
| Number of rows | 1 | — |
| Locating feature, bearing outer ring | Locating slot | — |
| Ring type | Two-piece inner ring and one-piece outer ring | — |
| Matched arrangement | No | — |
| Universal matching bearing | No | — |
| Axial internal clearance | CN | — |
| Material, bearing | Bearing steel | — |
| Coating | Without | — |
| Relubrication feature | Without | — |
| Indicative carbon footprint for new product | 167.0 kg CO 2 e | — |
| Technical Data | ||
| Bore Diameter (D) | — | 220 mm |
| Outside Diameter (D) | — | 400 mm |
| Width (B) | — | 78 mm |
| Basic Dynamic Load Rating, Radial (Cr) | — | 570,000 N |
| Basic Static Load Rating, Radial (C0R) | — | 980,000 N |
| Operating Temperature Min. (Tmin) | — | -30 °C |
| Limiting Speed (Ng) | — | 2,850 1/min |
| Operating Temperature Max. (Tmax) | — | 200 °C |
| Reference Speed (Nϑr) | — | 1,600 1/min |
| Fatigue Load Limit, Radial (Cur) | — | 32,000 N |
| Minimum Diameter Shaft Shoulder (Da Min) | — | 237 mm |
| Shoulder Diameter Inner Ring (D1) | — | 287.8 mm |
| Maximum Diameter Of Housing Shoulder (Da Max) | — | 383 mm |
| Minimum Chamfer Dimension (Rmin) | — | 4 mm |
| Maximum Fillet Radius (Ra Max) | — | 3 mm |
| Shoulder Diameter Outer Ring (D1) | — | 330.1 mm |
| Contact Angle (Α) | — | 45 ° |
| Distance Between The Apexes Of The Pressure Cones (A) | — | 310 mm |
| Temperature range | ||
| Operating temperature min.Tmin | — | -30 °C |
| Operating temperature min.Tmin | — | -22 °F |
| Operating temperature max.Tmax | — | 200 °C |
| Operating temperature max.Tmax | — | 392 °F |
Automatic matching is a search aid, not an interchangeability declaration. Confirm the full suffix, tolerances, internal design and application limits before substitution.