Cross-brand designation analysis
COMPARE / VERIFY
Same-model Comparison
Explore products that share a base designation across loaded brands, with dimensional agreement and data gaps shown clearly.
Automatic candidate selection
One base designation across loaded brands
Exact designations rank first. Dimensions, suffixes and other technical differences remain visible so the result is not mistaken for an interchangeability declaration.
Dimensions verified
“QJ1096” across 2 loaded brands
At least two brands share the same bore, outside diameter and width. Use Custom Compare when you want to choose exact suffix variants yourself.
Technical comparison
Choose exact variants instead →Brand differences at a glance
| Parameter | SKFQJ 1096 N2MA480 × 700 × 100 mm | FAGQJ1096-N2-MPA480 × 700 × 100 mm |
|---|---|---|
| Comparable specifications | ||
| Brand | SKF | FAG |
| Designation | QJ 1096 N2MA | QJ1096-N2-MPA |
| Product family | Angular contact ball bearings | — |
| Detailed type | Four-point contact ball bearing with locating slots | Four-point contact bearing |
| Series | — | QJ1096 |
| Bore diameterd | 480 mm | 480 mm |
| Outside diameterD | 700 mm | 700 mm |
| WidthB | 100 mm | 100 mm |
| Basic dynamic load ratingC | 1060 kN | 1060 kN |
| Basic static load ratingC0 | 2800 kN | 2800 kN |
| Fatigue load limitPu | 48 kN | 62 kN |
| Reference speednref | — | 620 r/min |
| Limiting speednG | 1300 r/min | 1490 r/min |
| Mass≈m | 135 kg | 138 kg |
| Precision class | — | PN — Normal (ISO 492:2023) |
| Sealing | Without | — |
| Cage | Machined brass | MPA — Solid brass cage, outer ring guided |
| Bearing material | Bearing steel | — |
| Lubricant | None | — |
| Minimum operating temperatureTmin | — | -30 °C |
| Maximum operating temperatureTmax | — | 200 °C |
| Capabilities & suitability | ||
| Radial load capacity | — | Yes |
| Axial load capacity in one direction | — | Yes |
| Axial load capacity in both directions | — | Yes |
| Suitable for grease lubrication | — | Yes |
| Suitable for oil lubrication | — | Yes |
| Unsealed design | — | Yes |
| Largebearing | — | Yes |
| Dimensions | ||
| Contact angle | 35.0 ° | — |
| Minimum chamfer dimensionrmin | — | 6 mm |
| Minimum chamfer dimensionrmin | — | 0.236 in |
| Shoulder diameter outer ringD1 | — | 625.8 mm |
| Shoulder diameter outer ringD1 | — | 24.638 in |
| Shoulder diameter inner ringd1 | — | 557.75 mm |
| Shoulder diameter inner ringd1 | — | 21.959 in |
| Distance between the apexes of the pressure conesa | — | 413.1 mm |
| Distance between the apexes of the pressure conesa | — | 16.264 in |
| Hight retaining slotan | — | 20 mm |
| Hight retaining slotan | — | 0.787 in |
| Width retaining slotbn | — | 15.5 mm |
| Width retaining slotbn | — | 0.61 in |
| Radius retaining slotrn | — | 3 mm |
| Radius retaining slotrn | — | 0.118 in |
| Angle retaining slot | — | 45 ° |
| Contact angleα | — | 35 ° |
| Engineering — Abutment dimensions | ||
| Abutment diameter shaftd a | min. 503 mm | — |
| Abutment diameter housingD a | max. 677 mm | — |
| Fillet radiusr a | max. 5 mm | — |
| Engineering — Calculation data | ||
| Calculation factorA | 22.3 | — |
| Limiting valuee | 0.95 | — |
| Calculation factorX | 0.6 | — |
| Calculation factorY 0 | 0.58 | — |
| Calculation factorY 1 | 0.66 | — |
| Calculation factorY 2 | 1.1 | — |
| Engineering — Dimensions | ||
| Shoulder diameter inner ringd 1 | ≈ 557 mm | — |
| Shoulder diameter outer ring/ inner diameter housing washerD 1 | ≈ 623 mm | — |
| Distance pressure point(s)a | 413 mm | — |
| Locating slot depth outer ringh | 20 mm | — |
| Locating slot width outer ringb | 15.5 mm | — |
| Corner radius locating slotr 0 | 3 mm | — |
| Chamfer dimension inner ringr 1,2 | min. 6 mm | — |
| Logistics | ||
| Product net weight | 135.0 kg | — |
| eClass code | 23-05-08-05 | — |
| UNSPSC code | 31171531 | — |
| Main Dimensions & Performance Data | ||
| Basic dynamic load rating, radialCr | — | 1,060,000 N |
| Basic dynamic load rating, radialCr | — | 238,309.353 lbf |
| Basic static load rating, radialC0r | — | 2,800,000 N |
| Basic static load rating, radialC0r | — | 629,496.403 lbf |
| Fatigue load limit, radialCur | — | 62,000 N |
| Fatigue load limit, radialCur | — | 13,938.849 lbf |
| Manufacturer Identity | ||
| Schaeffler Product Code | — | 366468 |
| Base Type | — | QJ1096 |
| Old Designation | — | ["QJ1096N2MPA"] |
| Gpsd Group | — | S03 |
| Product Line Id | — | 14 |
| X Life Marking | — | n.r. |
| SAP material number | — | 0384279740000 |
| Base product | — | 230508AD41 |
| Bearing X designation | — | QJ1096-N2-MPA |
| Mounting Manager ID | — | QJ1096-N2-MPA |
| Grease application ID | — | QJ1096-N2-MPA |
| Mounting dimensions | ||
| Minimum diameter shaft shoulderda min | — | 503 mm |
| Minimum diameter shaft shoulderda min | — | 19.803 in |
| Maximum diameter of housing shoulderDa max | — | 677 mm |
| Maximum diameter of housing shoulderDa max | — | 26.654 in |
| Maximum fillet radiusra max | — | 5 mm |
| Maximum fillet radiusra max | — | 0.197 in |
| Product characteristics | ||
| Design, bearing outer ringN2 | — | Two retaining grooves in the outer ring on one side |
| Tolerance classPN | — | Normal (ISO 492:2023) |
| Dimensional / heat stabilizationS1 | — | Rings dimensional stabilized up to 200° |
| Axial internal clearanceCN | — | Group N (CN) |
| Product identity | ||
| Official product category | Angular contact ball bearings | — |
| Official taxonomy path | /products/rolling-bearings/ball-bearings/angular-contact-ball-bearings/four-point-contact-ball-bearings | — |
| Structure group ID | BAQ_001 | — |
| Available from SKF | Yes | — |
| Remanufacturable | Yes | — |
| Product Identity | ||
| Construction | — | Four point contact bearing QJ10..-N2-MPA, holding grooves, solid brass cage |
| Short Description | — | Four-point contact bearing |
| Properties | ||
| Contact type | Four-point contact | — |
| Number of rows | 1 | — |
| Locating feature, bearing outer ring | Locating slot | — |
| Ring type | Two-piece inner ring and one-piece outer ring | — |
| Matched arrangement | No | — |
| Universal matching bearing | No | — |
| Axial internal clearance | CN | — |
| Material, bearing | Bearing steel | — |
| Coating | Without | — |
| Relubrication feature | Without | — |
| Indicative carbon footprint for new product | 500.0 kg CO 2 e | — |
| Technical Data | ||
| Bore Diameter (D) | — | 480 mm |
| Outside Diameter (D) | — | 700 mm |
| Width (B) | — | 100 mm |
| Basic Dynamic Load Rating, Radial (Cr) | — | 1,060,000 N |
| Basic Static Load Rating, Radial (C0R) | — | 2,800,000 N |
| Operating Temperature Min. (Tmin) | — | -30 °C |
| Limiting Speed (Ng) | — | 1,490 1/min |
| Operating Temperature Max. (Tmax) | — | 200 °C |
| Reference Speed (Nϑr) | — | 620 1/min |
| Angle Retaining Slot (Angle Retain) | — | 45 ° |
| Hight Retaining Slot (An) | — | 20 mm |
| Radius Retaining Slot (Rn) | — | 3 mm |
| Fatigue Load Limit, Radial (Cur) | — | 62,000 N |
| Minimum Diameter Shaft Shoulder (Da Min) | — | 503 mm |
| Shoulder Diameter Inner Ring (D1) | — | 557.75 mm |
| Maximum Diameter Of Housing Shoulder (Da Max) | — | 677 mm |
| Minimum Chamfer Dimension (Rmin) | — | 6 mm |
| Maximum Fillet Radius (Ra Max) | — | 5 mm |
| Shoulder Diameter Outer Ring (D1) | — | 625.8 mm |
| Contact Angle (Α) | — | 35 ° |
| Distance Between The Apexes Of The Pressure Cones (A) | — | 413.1 mm |
| Width Retaining Slot (Bn) | — | 15.5 mm |
| Temperature range | ||
| Operating temperature min.Tmin | — | -30 °C |
| Operating temperature min.Tmin | — | -22 °F |
| Operating temperature max.Tmax | — | 200 °C |
| Operating temperature max.Tmax | — | 392 °F |
Automatic matching is a search aid, not an interchangeability declaration. Confirm the full suffix, tolerances, internal design and application limits before substitution.