Cross-brand designation analysis
COMPARE / VERIFY
Same-model Comparison
Explore products that share a base designation across loaded brands, with dimensional agreement and data gaps shown clearly.
Automatic candidate selection
One base designation across loaded brands
Exact designations rank first. Dimensions, suffixes and other technical differences remain visible so the result is not mistaken for an interchangeability declaration.
Data incomplete
“PB20” across 2 loaded brands
The base designation is shared, but too few brands have complete boundary dimensions. Use Custom Compare when you want to choose exact suffix variants yourself.
Technical comparison
Choose exact variants instead →Brand differences at a glance
| Parameter | INAPB20-XL20 × 98.4 × 50.1 mm | IKOPB2020 × 46 × mm |
|---|---|---|
| Comparable specifications | ||
| Brand | INA | IKO |
| Designation | PB20-XL | PB20 |
| Product family | — | Standard Type Rod Ends |
| Detailed type | Plummer block housing units | Rod ends |
| Series | PB20 | PB |
| Bore diameterd | 20 mm | 20 mm |
| Outside diameterD | 98.4 mm | 46 mm |
| WidthB | 50.1 mm | — |
| Basic dynamic load ratingC | — | 30.8 kN |
| Basic static load ratingC0 | — | 74 kN |
| Mass≈m | 0.26 kg | 0.210013 kg |
| Bearing material | — | High Carbon Steel |
| Minimum operating temperatureTmin | — | 30 °C |
| Maximum operating temperatureTmax | — | 180 °C |
| Manufacturer Identity | ||
| Schaeffler Product Code | 401876 | — |
| Base Type | PB20 | — |
| Old Designation | ["PB20"] | — |
| Gpsd Group | I04 | — |
| Product Line Id | 72 | — |
| X Life Marking | XL | — |
| Cad Part Number | — | PB20 |
| Product Identity | ||
| Short Description | Plummer block housing unit | Spherical Bushing |
| Long Description | — | Spherical Bushing Pilloball, Insert Type/ Lubrication Type , High Carbon Steel |
| Official Bearing Family | — | Rod Ends |
| Official Bearing Type | — | Standard Type Rod Ends |
| Construction | Plummer block housing units PB, sheet steel housing, radial insert ball bearing with eccentric locking collar, P seals | — |
| Technical Data | ||
| Relubricatable | — | Yes |
| Width (B) | 50.1 mm | — |
| Outside Diameter (D) | 98.4 mm | — |
| Bore Diameter (D) | 20 mm | — |
Automatic matching is a search aid, not an interchangeability declaration. Confirm the full suffix, tolerances, internal design and application limits before substitution.