Cross-brand designation analysis
COMPARE / VERIFY
Same-model Comparison
Explore products that share a base designation across loaded brands, with dimensional agreement and data gaps shown clearly.
Automatic candidate selection
One base designation across loaded brands
Exact designations rank first. Dimensions, suffixes and other technical differences remain visible so the result is not mistaken for an interchangeability declaration.
Dimensions verified
“NX15” across 2 loaded brands
At least two brands share the same bore, outside diameter and width. Use Custom Compare when you want to choose exact suffix variants yourself.
Technical comparison
Choose exact variants instead →Brand differences at a glance
| Parameter | SKFNX 1515 × 24 × 28 mm | INANX15-XL15 × 24 × 28 mm |
|---|---|---|
| Comparable specifications | ||
| Brand | SKF | INA |
| Designation | NX 15 | NX15-XL |
| Product family | Combined needle roller / thrust ball bearings | — |
| Detailed type | Combined needle roller / thrust ball bearing (full complement thrust part) with a cover with lubrication holes | Needle roller/axial ball bearing |
| Series | — | NX15 |
| Bore diameterd | 15 mm | 15 mm |
| Outside diameterD | 24 mm | 24 mm |
| WidthB | 28 mm | 28 mm |
| Basic dynamic load ratingC | — | 12.1 kN |
| Basic static load ratingC0 | — | 12.7 kN |
| Fatigue load limitPu | — | 2.36 kN |
| Reference speednref | 7500 r/min | — |
| Limiting speednG | 8500 r/min | 8000 r/min |
| Mass≈m | 0.048 kg | 0.05141 kg |
| Bearing material | Bearing steel | — |
| Minimum operating temperatureTmin | — | -30 °C |
| Maximum operating temperatureTmax | — | 120 °C |
| Engineering — Abutment dimensions | ||
| Diameter of shaft abutmentd a | min. 19 mm | — |
| Diameter of housing abutmentD a | max. 22 mm | — |
| Distance side face to back face of snap ringC a | 12.2 mm | — |
| Radius of filletr a | max. 0.3 mm | — |
| Bore diameter of associated inner ringd i | 12 mm | — |
| Diameter of inner ring racewayF | 15 mm | — |
| Width of associated inner ringB i | 16 mm | — |
| Engineering — Associated products | ||
| Inner ring | IR 12x15x16 | — |
| Snap ring | SW 24 | — |
| Engineering — Calculation data | ||
| Basic dynamic load rating, radialC | 11 kN | — |
| Basic static load rating, radialC 0 | 14 kN | — |
| Basic dynamic load rating, axialC | 6.18 kN | — |
| Basic static load rating, axialC 0 | 12.2 kN | — |
| Fatigue load limit, radialP u | 1.66 kN | — |
| Fatigue load limit, axialP u | 0.45 kN | — |
| Minimum axial load factorA | 0.0008 | — |
| Engineering — Dimensions | ||
| Diameter under rollersF w | 15 mm | — |
| Distance side face to lubrication holeC 2 | 8 mm | — |
| Bore diameter of thrust partd | 15 mm | — |
| Chamfer dimensionr 1,2 | min. 0.3 mm | — |
| Logistics | ||
| Product net weight | 0.048 kg | — |
| eClass code | 23-05-09-03 | — |
| UNSPSC code | 31171512 | — |
| Manufacturer Identity | ||
| Schaeffler Product Code | — | 397453 |
| Base Type | — | NX15 |
| Old Designation | — | ["NX15"] |
| Gpsd Group | — | I01 |
| Product Line Id | — | 09 |
| X Life Marking | — | XL |
| Product identity | ||
| Official product category | Combined needle roller / thrust ball bearings | — |
| Official taxonomy path | /products/rolling-bearings/roller-bearings/needle-roller-bearings/combined-needle-roller-bearings | — |
| Structure group ID | BVN_002_003 | — |
| Available from SKF | Yes | — |
| Remanufacturable | No | — |
| Product Identity | ||
| Construction | — | Needle roller/axial ball bearings NX, single direction axial component, for oil lubrication |
| Short Description | — | Needle roller/axial ball bearing |
| Properties | ||
| Rolling bearing type | Needle roller / full complement thrust ball bearing | — |
| Bearing part | Radial part without inner ring | — |
| Thrust part | Without cage | — |
| Radial part | With cage | — |
| Rolling element (thrust part) | Balls | — |
| Axial load capability | Single-direction | — |
| Tolerance class | Other | — |
| Material, bearing | Bearing steel | — |
| Coating | Without | — |
| Special feature | Thrust part with stamped steel cover with lubrication holes | — |
| Lubricant (thrust part) | None | — |
| Indicative carbon footprint for new product | 0.18 kg CO 2 e | — |
| Technical Data | ||
| Bore Diameter (Fw) | — | 15 mm |
| Outside Diamater (D) | — | 24 mm |
| Height (C) | — | 28 mm |
| Basic Dynamic Load Rating, Radial (Cr) | — | 12,100 N |
| Basic Static Load Rating, Radial (C0R) | — | 12,700 N |
| Basic Dynamic Load Rating, Axial (Ca) | — | 5,600 N |
| Basic Static Load Rating, Axial (C0A) | — | 10,400 N |
| Operating Temperature Min. (Tmin) | — | -30 °C |
| Operating Temperature Max. (Tmax) | — | 120 °C |
| Limiting Speed (Limiting Spe) | — | 8,000 1/min |
| Fatigue Load Limit, Axial (Cua) | — | 475 N |
| Maximum Recess Radius (Ra Max) | — | 0.3 mm |
| Mounting Dimension Shaft Shoulder (Da) | — | 19 mm |
| Connection Diameter Snap Ring (D1) | — | 26.5 mm |
| Distance To Lubrication Hole (C1) | — | 8 mm |
| Distance To Lubrication Hole (C2) | — | 8 mm |
| Connection Width With Snap Ring (C2) | — | 12.2 mm |
| Bore Diameter Of Shaft Washer (Dw) | — | 15 mm |
| Minimum Chamfer Dimension (Rmin) | — | 0.3 mm |
| Fatigue Load Limit, Radial (Cur) | — | 2,360 N |
Automatic matching is a search aid, not an interchangeability declaration. Confirm the full suffix, tolerances, internal design and application limits before substitution.