Cross-brand designation analysis
COMPARE / VERIFY
Same-model Comparison
Explore products that share a base designation across loaded brands, with dimensional agreement and data gaps shown clearly.
Automatic candidate selection
One base designation across loaded brands
Exact designations rank first. Dimensions, suffixes and other technical differences remain visible so the result is not mistaken for an interchangeability declaration.
Dimensions verified
“NUP319” across 3 loaded brands
At least two brands share the same bore, outside diameter and width. Use Custom Compare when you want to choose exact suffix variants yourself.
Technical comparison
Choose exact variants instead →Brand differences at a glance
| Parameter | FAGNUP319-E-XL-TVP295 × 200 × 45 mm | NSKNUP319W95 × 200 × 45 mm | KOYONUP319R95 × 200 × 45 mm |
|---|---|---|---|
| Comparable specifications | |||
| Brand | FAG | NSK | KOYO |
| Designation | NUP319-E-XL-TVP2 | NUP319W | NUP319R |
| Product family | — | Cylindrical roller bearing | Single-row / NUP |
| Detailed type | Cylindrical roller bearings | Cylindrical roller bearings | Cylindrical roller bearings |
| Series | NUP319 | — | — |
| Bore diameterd | 95 mm | 95 mm | 95 mm |
| Outside diameterD | 200 mm | 200 mm | 200 mm |
| WidthB | 45 mm | 45 mm | 45 mm |
| Basic dynamic load ratingC | 390 kN | 320 kN | 418 kN |
| Basic static load ratingC0 | 380 kN | 289 kN | 387 kN |
| Fatigue load limitPu | 65 kN | — | 54.3 kN |
| Reference speednref | 3550 r/min | — | — |
| Limiting speednG | 4700 r/min | — | 2900 r/min |
| Mass≈m | 6.5 kg | — | 6.76 kg |
| Precision class | PN — Normal (ISO 492:2023) | — | — |
| Internal clearance | CN (Group N) — Normal internal clearance | — | — |
| Cage | TVP2 — Solid Window Cage made from PA66 | Pressed steel | — |
| Minimum operating temperatureTmin | -30 °C | — | — |
| Maximum operating temperatureTmax | 120 °C | — | — |
| Boundary dimensions | |||
| Bearing widthB | — | 45 mm | — |
| Minimum bearing chamferr min. | — | 3 mm | — |
| Minimum secondary bearing chamferr1 min. | — | 3 mm | — |
| Roller inscribed circle diameterFw | — | 121.5 mm | — |
| Capabilities & suitability | |||
| Radial load capacity | Yes | — | — |
| Axial load capacity in one direction | Yes | — | — |
| Axial load capacity in both directions | Yes | — | — |
| Suitable for grease lubrication | Yes | — | — |
| Suitable for oil lubrication | Yes | — | — |
| Unsealed design | Yes | — | — |
| Catalogue reference mass | |||
| Approximate shared-row mass — not separately stated for each rib arrangement | — | 6.23 kg | — |
| Classification | |||
| Official Category Path | — | — | Cylindrical roller bearings - Single-row - NUP |
| Official Classification 1 | — | — | Cylindrical roller bearings / Single-row / NUP |
| Construction | |||
| Single-row construction type | — | NUP | — |
| Rib arrangement | — | Two outer-ring ribs; one integral and one loose inner-ring rib | — |
| Standard cage material | — | Pressed steel | — |
| Standard cage marking | — | W | — |
| Other cage codes listed for this catalogue row | — | None listed in this row | — |
| Precision — designation omission rule | — | ISO Normal when no precision suffix is specified | — |
| Clearance identification — verify interchangeability | — | No clearance suffix shown. CN omission applies to interchangeable designs; do not infer a numerical clearance. | — |
| Optimized crowning note | — | No optimized-crowning asterisk on this row | — |
| Dimensions | |||
| Minimum chamfer dimensionrmin | 3 mm | — | — |
| Minimum chamfer dimensionrmin | 0.118 in | — | — |
| Minimum chamfer dimensionr1 min | 3 mm | — | — |
| Minimum chamfer dimensionr1 min | 0.118 in | — | — |
| Raceway diameter outer ringE | 177.5 mm | — | — |
| Raceway diameter outer ringE | 6.988 in | — | — |
| Raceway diameter inner ringF | 121.5 mm | — | — |
| Raceway diameter inner ringF | 4.783 in | — | — |
| Width of loose ribB3 | 7.5 mm | — | — |
| Width of loose ribB3 | 0.295 in | — | — |
| Load ratings — standard cage | |||
| Basic dynamic radial load ratingCr | — | 320000 N | — |
| Basic static radial load ratingC0r | — | 289000 N | — |
| Lubrication-qualified speed — standard cage | |||
| Thermal speed rating — oil bath | — | 4300 r/min | — |
| Mechanical limiting speed — forced oil circulation | — | Not stated in this catalogue row | — |
| Limiting speed — grease | — | 2400 r/min | — |
| Limiting speed — oil bath | — | 3000 r/min | — |
| Main Dimensions & Performance Data | |||
| Basic dynamic load rating, radialCr | 390,000 N | — | — |
| Basic dynamic load rating, radialCr | 87,679.856 lbf | — | — |
| Basic static load rating, radialC0r | 380,000 N | — | — |
| Basic static load rating, radialC0r | 85,431.655 lbf | — | — |
| Fatigue load limit, radialCur | 65,000 N | — | — |
| Fatigue load limit, radialCur | 14,613.309 lbf | — | — |
| Manufacturer Identity | |||
| Schaeffler Product Code | 373975 | — | — |
| Official Class Key | — | — | 040-010-000 |
| Base Type | NUP319 | — | — |
| Old Designation | ["NUP319E.TVP2","NUP319-E-TVP2"] | — | — |
| Gpsd Group | F01 | — | — |
| Product Line Id | 63 | — | — |
| X Life Marking | XL | — | — |
| SAP material number | 0167416170000 | — | — |
| Base product | 2305090122 | — | — |
| Bearing X designation | NUP319-E-XL-TVP2 | — | — |
| Mounting Manager ID | NUP319-E-XL-TVP2 | — | — |
| Grease application ID | NUP319-E-XL-TVP2 | — | — |
| Mounting dimensions | |||
| Maximum rib diameter inner ringd1 | 132 mm | — | — |
| Maximum rib diameter inner ringd1 | 5.197 in | — | — |
| Minimum rib diameter outer ringD1 min | 169.6 mm | — | — |
| Minimum rib diameter outer ringD1 min | 6.677 in | — | — |
| Minimum diameter shaft shoulderda min | 109 mm | — | — |
| Minimum diameter shaft shoulderda min | 4.291 in | — | — |
| Minimum shaft shoulderdc min | 134 mm | — | — |
| Minimum shaft shoulderdc min | 5.276 in | — | — |
| Maximum diameter of housing shoulderDa max | 186 mm | — | — |
| Maximum diameter of housing shoulderDa max | 7.323 in | — | — |
| Maximum recess radiusra max | 2.5 mm | — | — |
| Maximum recess radiusra max | 0.098 in | — | — |
| Mounting dimensions — shown arrangement | |||
| Minimum shaft shoulder diameterdb min. | — | 108 mm | — |
| Maximum housing shoulder diameterDa max. | — | 187 mm | — |
| Maximum adjacent fillet radiusra max. | — | 2.5 mm | — |
| Maximum secondary adjacent fillet radiusrb max. | — | 2.5 mm | — |
| Product characteristics | |||
| DesignE | Increased Capacity Design | — | — |
| Radial internal clearanceCN (Group N) | Normal internal clearance | — | — |
| Tolerance classPN | Normal (ISO 492:2023) | — | — |
| Number of rows1 | Single-row design | — | — |
| Product Identity | |||
| Construction | Cylindrical roller bearing NUP..-E-XL-TVP2, with cage, single row, locating bearing, 2 ribs on outer ring, 1 rib on inner ring, rib washer internal, type NUP | — | — |
| Short Description | Cylindrical roller bearing | — | — |
| Technical Data | |||
| d | — | — | 200 mm |
| B | — | — | 45 mm |
| R(Min.) | — | — | 3 mm |
| R1(Min.) | — | — | 3 mm |
| Bore Diameter (D) | 95 mm | — | — |
| Fw | — | — | 121.5 mm |
| Outside Diamater (D) | 200 mm | — | — |
| Ew | — | — | - mm |
| Total Width (B) | 45 mm | — | — |
| Basic Load Ratings : Cr | — | — | 418 kN |
| Basic Dynamic Load Rating, Radial (Cr) | 390,000 N | — | — |
| Basic Load Ratings : C0R | — | — | 387 kN |
| Basic Static Load Rating, Radial (C0R) | 380,000 N | — | — |
| Fatigue Load Limit : Cu | — | — | 54.3 kN |
| Raceway Diameter Inner Ring (F) | 121.5 mm | — | — |
| Limiting Speeds(Grease Lub.) | — | — | 2900 min-1 |
| Operating Temperature Min. (Tmin) | -30 °C | — | — |
| Limiting Speeds(Oil Lub.) | — | — | 3900 min-1 |
| Minimum Diameter Shaft Shoulder (Da) | 109 mm | — | — |
| Sd1 | — | — | - mm |
| Width Of Loose Rib (B3) | 7.5 mm | — | — |
| B1 | — | — | - mm |
| Operating Temperature Max. (Tmax) | 120 °C | — | — |
| B2 | — | — | - mm |
| Limiting Speed (Limiting Spe) | 4,700 1/min | — | — |
| Da(Min.) | — | — | 108 mm |
| Minimum Shaft Shoulder (Dc Min) | 134 mm | — | — |
| Db(Min.) | — | — | - mm |
| Reference Speed (Nϑr) | 3,550 1/min | — | — |
| Db(Max.) | — | — | - mm |
| Maximum Recess Radius (Ra Max) | 2.5 mm | — | — |
| Dc(Min.) | — | — | - mm |
| Maximum Diameter Of Housing Shoulder (Da) | 186 mm | — | — |
| Dd(Min.) | — | — | - mm |
| Maximum Rib Diameter Inner Ring (D1) | 132 mm | — | — |
| Da(Max.) | — | — | 187 mm |
| Minimum Chamfer Dimension (R1 Min) | 3 mm | — | — |
| Minimum Rib Diameter Outer Ring (D1 Min) | 169.6 mm | — | — |
| Minimum Chamfer Dimension (Rmin) | 3 mm | — | — |
| Ra(Max.) | — | — | 2.5 mm |
| Raceway Diameter Outer Ring (E) | 177.5 mm | — | — |
| Rb(Max.) | — | — | 2.5 mm |
| Fatigue Load Limit, Radial (Cur) | 65,000 N | — | — |
| Mass(Refer.) | — | — | 6.76 kg |
| Temperature range | |||
| Operating temperature min.Tmin | -30 °C | — | — |
| Operating temperature min.Tmin | -22 °F | — | — |
| Operating temperature max.Tmax | 120 °C | — | — |
| Operating temperature max.Tmax | 248 °F | — | — |
Automatic matching is a search aid, not an interchangeability declaration. Confirm the full suffix, tolerances, internal design and application limits before substitution.