Cross-brand designation analysis
COMPARE / VERIFY
Same-model Comparison
Explore products that share a base designation across loaded brands, with dimensional agreement and data gaps shown clearly.
Automatic candidate selection
One base designation across loaded brands
Exact designations rank first. Dimensions, suffixes and other technical differences remain visible so the result is not mistaken for an interchangeability declaration.
Dimensions verified
“NUP317” across 4 loaded brands
At least two brands share the same bore, outside diameter and width. Use Custom Compare when you want to choose exact suffix variants yourself.
Technical comparison
Choose exact variants instead →Brand differences at a glance
| Parameter | SKFNUP 317 ECJ85 × 180 × 41 mm | FAGNUP317-E-XL-TVP285 × 180 × 41 mm | NSKNUP317W85 × 180 × 41 mm | KOYONUP317R85 × 180 × 41 mm |
|---|---|---|---|---|
| Comparable specifications | ||||
| Brand | SKF | FAG | NSK | KOYO |
| Designation | NUP 317 ECJ | NUP317-E-XL-TVP2 | NUP317W | NUP317R |
| Product family | Cylindrical roller bearings | — | Cylindrical roller bearing | Single-row / NUP |
| Detailed type | Single row cylindrical roller bearing, nup design | Cylindrical roller bearings | Cylindrical roller bearings | Cylindrical roller bearings |
| Series | — | NUP317 | — | — |
| Bore diameterd | 85 mm | 85 mm | 85 mm | 85 mm |
| Outside diameterD | 180 mm | 180 mm | 180 mm | 180 mm |
| WidthB | 41 mm | 41 mm | 41 mm | 41 mm |
| Basic dynamic load ratingC | 340 kN | 320 kN | 261 kN | 364 kN |
| Basic static load ratingC0 | 335 kN | 300 kN | 228 kN | 330 kN |
| Fatigue load limitPu | 41.5 kN | 54 kN | — | 48.3 kN |
| Reference speednref | 4000 r/min | 3900 r/min | — | — |
| Limiting speednG | 4800 r/min | 5200 r/min | — | 3300 r/min |
| Mass≈m | 4.77 kg | 4.77 kg | — | 5.02 kg |
| Precision class | — | PN — Normal (ISO 492:2023) | — | — |
| Internal clearance | CN | CN (Group N) — Normal internal clearance | — | — |
| Sealing | Without | — | — | — |
| Cage | Sheet metal | TVP2 — Solid Window Cage made from PA66 | Pressed steel | — |
| Lubricant | None | — | — | — |
| Minimum operating temperatureTmin | — | -30 °C | — | — |
| Maximum operating temperatureTmax | — | 120 °C | — | — |
| Boundary dimensions | ||||
| Bearing widthB | — | — | 41 mm | — |
| Minimum bearing chamferr min. | — | — | 3 mm | — |
| Minimum secondary bearing chamferr1 min. | — | — | 3 mm | — |
| Roller inscribed circle diameterFw | — | — | 108 mm | — |
| Capabilities & suitability | ||||
| Radial load capacity | — | Yes | — | — |
| Axial load capacity in one direction | — | Yes | — | — |
| Axial load capacity in both directions | — | Yes | — | — |
| Suitable for grease lubrication | — | Yes | — | — |
| Suitable for oil lubrication | — | Yes | — | — |
| Unsealed design | — | Yes | — | — |
| Catalogue reference mass | ||||
| Approximate shared-row mass — not separately stated for each rib arrangement | — | — | 4.6 kg | — |
| Classification | ||||
| Official Category Path | — | — | — | Cylindrical roller bearings - Single-row - NUP |
| Official Classification 1 | — | — | — | Cylindrical roller bearings / Single-row / NUP |
| Construction | ||||
| Single-row construction type | — | — | NUP | — |
| Rib arrangement | — | — | Two outer-ring ribs; one integral and one loose inner-ring rib | — |
| Standard cage material | — | — | Pressed steel | — |
| Standard cage marking | — | — | W | — |
| Other cage codes listed for this catalogue row | — | — | M | — |
| Precision — designation omission rule | — | — | ISO Normal when no precision suffix is specified | — |
| Clearance identification — verify interchangeability | — | — | No clearance suffix shown. CN omission applies to interchangeable designs; do not infer a numerical clearance. | — |
| Optimized crowning note | — | — | No optimized-crowning asterisk on this row | — |
| Dimensions | ||||
| Minimum chamfer dimensionrmin | — | 3 mm | — | — |
| Minimum chamfer dimensionrmin | — | 0.118 in | — | — |
| Minimum chamfer dimensionr1 min | — | 3 mm | — | — |
| Minimum chamfer dimensionr1 min | — | 0.118 in | — | — |
| Raceway diameter outer ringE | — | 160 mm | — | — |
| Raceway diameter outer ringE | — | 6.299 in | — | — |
| Raceway diameter inner ringF | — | 108 mm | — | — |
| Raceway diameter inner ringF | — | 4.252 in | — | — |
| Width of loose ribB3 | — | 6.5 mm | — | — |
| Width of loose ribB3 | — | 0.256 in | — | — |
| Engineering — Abutment dimensions | ||||
| Diameter of spacer sleeved a | min. 99 mm | — | — | — |
| Diameter of shaft abutmentd b | min. 120 mm | — | — | — |
| Diameter of housing abutmentD a | max. 165.5 mm | — | — | — |
| Radius of filletr a | max. 2.5 mm | — | — | — |
| Engineering — Calculation data | ||||
| SKF performance class | SKF Explorer | — | — | — |
| Minimum load factork r | 0.15 | — | — | — |
| Limiting valuee | 0.2 | — | — | — |
| Calculation factorY | 0.6 | — | — | — |
| Engineering — Dimensions | ||||
| Shoulder diameter of inner ringd 1 | ≈ 117 mm | — | — | — |
| Shoulder diameter of outer ringD 1 | ≈ 151.4 mm | — | — | — |
| Raceway diameter of inner ringF | 108 mm | — | — | — |
| Chamfer dimensionr 1,2 | min. 3 mm | — | — | — |
| Chamfer dimension of loose flange ringr 3,4 | min. 3 mm | — | — | — |
| Load ratings — standard cage | ||||
| Basic dynamic radial load ratingCr | — | — | 261000 N | — |
| Basic static radial load ratingC0r | — | — | 228000 N | — |
| Logistics | ||||
| Product net weight | 4.77 kg | — | — | — |
| eClass code | 23-05-09-01 | — | — | — |
| UNSPSC code | 31171505 | — | — | — |
| Lubrication-qualified speed — standard cage | ||||
| Thermal speed rating — oil bath | — | — | 4800 r/min | — |
| Mechanical limiting speed — forced oil circulation | — | — | Not stated in this catalogue row | — |
| Limiting speed — grease | — | — | 2600 r/min | — |
| Limiting speed — oil bath | — | — | 3200 r/min | — |
| Main Dimensions & Performance Data | ||||
| Basic dynamic load rating, radialCr | — | 320,000 N | — | — |
| Basic dynamic load rating, radialCr | — | 71,942.446 lbf | — | — |
| Basic static load rating, radialC0r | — | 300,000 N | — | — |
| Basic static load rating, radialC0r | — | 67,446.043 lbf | — | — |
| Fatigue load limit, radialCur | — | 54,000 N | — | — |
| Fatigue load limit, radialCur | — | 12,140.288 lbf | — | — |
| Manufacturer Identity | ||||
| Schaeffler Product Code | — | 373969 | — | — |
| Official Class Key | — | — | — | 040-010-000 |
| Base Type | — | NUP317 | — | — |
| Old Designation | — | ["NUP317-E-TVP2","NUP317E.TVP2"] | — | — |
| Gpsd Group | — | F01 | — | — |
| Product Line Id | — | 63 | — | — |
| X Life Marking | — | XL | — | — |
| SAP material number | — | 0167416090000 | — | — |
| Base product | — | 2305090122 | — | — |
| Bearing X designation | — | NUP317-E-XL-TVP2 | — | — |
| Mounting Manager ID | — | NUP317-E-XL-TVP2 | — | — |
| Grease application ID | — | NUP317-E-XL-TVP2 | — | — |
| Mounting dimensions | ||||
| Maximum rib diameter inner ringd1 | — | 117.8 mm | — | — |
| Maximum rib diameter inner ringd1 | — | 4.638 in | — | — |
| Minimum rib diameter outer ringD1 min | — | 152.7 mm | — | — |
| Minimum rib diameter outer ringD1 min | — | 6.012 in | — | — |
| Minimum diameter shaft shoulderda min | — | 99 mm | — | — |
| Minimum diameter shaft shoulderda min | — | 3.898 in | — | — |
| Minimum shaft shoulderdc min | — | 119 mm | — | — |
| Minimum shaft shoulderdc min | — | 4.685 in | — | — |
| Maximum diameter of housing shoulderDa max | — | 166 mm | — | — |
| Maximum diameter of housing shoulderDa max | — | 6.535 in | — | — |
| Maximum recess radiusra max | — | 2.5 mm | — | — |
| Maximum recess radiusra max | — | 0.098 in | — | — |
| Mounting dimensions — shown arrangement | ||||
| Minimum shaft shoulder diameterdb min. | — | — | 98 mm | — |
| Maximum housing shoulder diameterDa max. | — | — | 167 mm | — |
| Maximum adjacent fillet radiusra max. | — | — | 2.5 mm | — |
| Maximum secondary adjacent fillet radiusrb max. | — | — | 2.5 mm | — |
| Product characteristics | ||||
| DesignE | — | Increased Capacity Design | — | — |
| Radial internal clearanceCN (Group N) | — | Normal internal clearance | — | — |
| Tolerance classPN | — | Normal (ISO 492:2023) | — | — |
| Number of rows1 | — | Single-row design | — | — |
| Product identity | ||||
| Official product category | Cylindrical roller bearings | — | — | — |
| Official taxonomy path | /products/rolling-bearings/roller-bearings/cylindrical-roller-bearings/single-row-cylindrical-roller-bearings | — | — | — |
| Structure group ID | BC1_001_101 | — | — | — |
| Available from SKF | Yes | — | — | — |
| Remanufacturable | No | — | — | — |
| Product Identity | ||||
| Construction | — | Cylindrical roller bearing NUP..-E-XL-TVP2, with cage, single row, locating bearing, 2 ribs on outer ring, 1 rib on inner ring, rib washer internal, type NUP | — | — |
| Short Description | — | Cylindrical roller bearing | — | — |
| Properties | ||||
| Bearing part | Complete bearing | — | — | — |
| Axial displacement capability | None | — | — | — |
| Number of rows | 1 | — | — | — |
| Locating feature, bearing outer ring | Without | — | — | — |
| Bore type | Cylindrical | — | — | — |
| Number of flanges, outer ring | 2 | — | — | — |
| Number of flanges, inner ring | 1 | — | — | — |
| Loose flange | Inner ring loose flange | — | — | — |
| Radial internal clearance | CN | — | — | — |
| Tolerance class | Normal | — | — | — |
| Coating | Without | — | — | — |
| Relubrication feature | Without | — | — | — |
| Indicative carbon footprint for new product | 17.7 kg CO 2 e | — | — | — |
| Technical Data | ||||
| d | — | — | — | 180 mm |
| B | — | — | — | 41 mm |
| R(Min.) | — | — | — | 3 mm |
| R1(Min.) | — | — | — | 3 mm |
| Bore Diameter (D) | — | 85 mm | — | — |
| Fw | — | — | — | 108 mm |
| Outside Diamater (D) | — | 180 mm | — | — |
| Ew | — | — | — | - mm |
| Total Width (B) | — | 41 mm | — | — |
| Basic Load Ratings : Cr | — | — | — | 364 kN |
| Basic Dynamic Load Rating, Radial (Cr) | — | 320,000 N | — | — |
| Basic Load Ratings : C0R | — | — | — | 330 kN |
| Basic Static Load Rating, Radial (C0R) | — | 300,000 N | — | — |
| Fatigue Load Limit : Cu | — | — | — | 48.3 kN |
| Raceway Diameter Inner Ring (F) | — | 108 mm | — | — |
| Limiting Speeds(Grease Lub.) | — | — | — | 3300 min-1 |
| Operating Temperature Min. (Tmin) | — | -30 °C | — | — |
| Limiting Speeds(Oil Lub.) | — | — | — | 4400 min-1 |
| Minimum Diameter Shaft Shoulder (Da) | — | 99 mm | — | — |
| Sd1 | — | — | — | - mm |
| Width Of Loose Rib (B3) | — | 6.5 mm | — | — |
| B1 | — | — | — | - mm |
| Operating Temperature Max. (Tmax) | — | 120 °C | — | — |
| B2 | — | — | — | - mm |
| Limiting Speed (Limiting Spe) | — | 5,200 1/min | — | — |
| Da(Min.) | — | — | — | 98 mm |
| Minimum Shaft Shoulder (Dc Min) | — | 119 mm | — | — |
| Db(Min.) | — | — | — | - mm |
| Reference Speed (Nϑr) | — | 3,900 1/min | — | — |
| Db(Max.) | — | — | — | - mm |
| Maximum Recess Radius (Ra Max) | — | 2.5 mm | — | — |
| Dc(Min.) | — | — | — | - mm |
| Maximum Diameter Of Housing Shoulder (Da) | — | 166 mm | — | — |
| Dd(Min.) | — | — | — | - mm |
| Maximum Rib Diameter Inner Ring (D1) | — | 117.8 mm | — | — |
| Da(Max.) | — | — | — | 167 mm |
| Minimum Chamfer Dimension (R1 Min) | — | 3 mm | — | — |
| Minimum Rib Diameter Outer Ring (D1 Min) | — | 152.7 mm | — | — |
| Minimum Chamfer Dimension (Rmin) | — | 3 mm | — | — |
| Ra(Max.) | — | — | — | 2.5 mm |
| Raceway Diameter Outer Ring (E) | — | 160 mm | — | — |
| Rb(Max.) | — | — | — | 2.5 mm |
| Fatigue Load Limit, Radial (Cur) | — | 54,000 N | — | — |
| Mass(Refer.) | — | — | — | 5.02 kg |
| Temperature range | ||||
| Operating temperature min.Tmin | — | -30 °C | — | — |
| Operating temperature min.Tmin | — | -22 °F | — | — |
| Operating temperature max.Tmax | — | 120 °C | — | — |
| Operating temperature max.Tmax | — | 248 °F | — | — |
Automatic matching is a search aid, not an interchangeability declaration. Confirm the full suffix, tolerances, internal design and application limits before substitution.