Cross-brand designation analysis
COMPARE / VERIFY
Same-model Comparison
Explore products that share a base designation across loaded brands, with dimensional agreement and data gaps shown clearly.
Automatic candidate selection
One base designation across loaded brands
Exact designations rank first. Dimensions, suffixes and other technical differences remain visible so the result is not mistaken for an interchangeability declaration.
Dimensions verified
“NUP224” across 5 loaded brands
At least two brands share the same bore, outside diameter and width. Use Custom Compare when you want to choose exact suffix variants yourself.
Technical comparison
Choose exact variants instead →Brand differences at a glance
| Parameter | SKFNUP 224 ECJ120 × 215 × 40 mm | FAGNUP224-E-XL-TVP2120 × 215 × 40 mm | TIMKENNUP224EMA120 × 215 × 40 mm | NSKNUP224EM120 × 215 × 40 mm | KOYONUP224R120 × 215 × 40 mm |
|---|---|---|---|---|---|
| Comparable specifications | |||||
| Brand | SKF | FAG | TIMKEN | NSK | KOYO |
| Designation | NUP 224 ECJ | NUP224-E-XL-TVP2 | NUP224EMA | NUP224EM | NUP224R |
| Product family | Cylindrical roller bearings | — | Cylindrical 1-Row | Cylindrical roller bearing | Single-row / NUP |
| Detailed type | Single row cylindrical roller bearing, nup design | Cylindrical roller bearings | Cylindrical roller bearings | Cylindrical roller bearings | Cylindrical roller bearings |
| Series | — | NUP224 | EX27557 | — | — |
| Bore diameterd | 120 mm | 120 mm | 120 mm | 120 mm | 120 mm |
| Outside diameterD | 215 mm | 215 mm | 215 mm | 215 mm | 215 mm |
| WidthB | 40 mm | 40 mm | 40 mm | 40 mm | 40 mm |
| Basic dynamic load ratingC | 390 kN | 390 kN | 379 kN | 410 kN | 419 kN |
| Basic static load ratingC0 | 430 kN | 415 kN | 431 kN | 420 kN | 421 kN |
| Fatigue load limitPu | 49 kN | 69 kN | — | — | 57.6 kN |
| Reference speednref | 3400 r/min | 3050 r/min | — | — | — |
| Limiting speednG | 3600 r/min | 4350 r/min | — | — | 2800 r/min |
| Mass≈m | 5.95 kg | 5.83 kg | 6.5 kg | — | 6.17 kg |
| Precision class | — | PN — Normal (ISO 492:2023) | — | — | — |
| Internal clearance | CN | CN (Group N) — Normal internal clearance | — | — | — |
| Sealing | Without | — | Open | — | — |
| Cage | Sheet metal | TVP2 — Solid Window Cage made from PA66 | Window Brass cage | Machined brass | — |
| Lubricant | None | — | — | — | — |
| Minimum operating temperatureTmin | — | -30 °C | — | — | — |
| Maximum operating temperatureTmax | — | 120 °C | — | — | — |
| Boundary dimensions | |||||
| Bearing widthB | — | — | — | 40 mm | — |
| Minimum bearing chamferr min. | — | — | — | 2.1 mm | — |
| Minimum secondary bearing chamferr1 min. | — | — | — | 2.1 mm | — |
| Roller inscribed circle diameterFw | — | — | — | 143.5 mm | — |
| Calculation Factors | |||||
| K Factor | — | — | 0.00 | — | — |
| Y1 Factor | — | — | 0.00 | — | — |
| Y2 Factor | — | — | 0.00 | — | — |
| Y0 Factor | — | — | 0.00 | — | — |
| E Factor | — | — | 0.00 | — | — |
| Cg Factor | — | — | 0.1089 | — | — |
| Capabilities & suitability | |||||
| Radial load capacity | — | Yes | — | — | — |
| Axial load capacity in one direction | — | Yes | — | — | — |
| Axial load capacity in both directions | — | Yes | — | — | — |
| Suitable for grease lubrication | — | Yes | — | — | — |
| Suitable for oil lubrication | — | Yes | — | — | — |
| Unsealed design | — | Yes | — | — | — |
| Catalogue reference mass | |||||
| Approximate shared-row mass — not separately stated for each rib arrangement | — | — | — | 6.43 kg | — |
| Classification | |||||
| Official Category Path | — | — | — | — | Cylindrical roller bearings - Single-row - NUP |
| Official Classification 1 | — | — | — | — | Cylindrical roller bearings / Single-row / NUP |
| Construction | |||||
| Single-row construction type | — | — | — | NUP | — |
| Rib arrangement | — | — | — | Two outer-ring ribs; one integral and one loose inner-ring rib | — |
| Standard cage material | — | — | — | Machined brass | — |
| Standard cage marking | — | — | — | M | — |
| Other cage codes listed for this catalogue row | — | — | — | None listed in this row | — |
| Precision — designation omission rule | — | — | — | ISO Normal when no precision suffix is specified | — |
| Clearance identification — verify interchangeability | — | — | — | No clearance suffix shown. CN omission applies to interchangeable designs; do not infer a numerical clearance. | — |
| Optimized crowning note | — | — | — | Catalogue asterisk: optimized crowning may be available; not verified as fitted | — |
| Dimensions | |||||
| Minimum chamfer dimensionrmin | — | 2.1 mm | — | — | — |
| Minimum chamfer dimensionrmin | — | 0.083 in | — | — | — |
| Minimum chamfer dimensionr1 min | — | 2.1 mm | — | — | — |
| Minimum chamfer dimensionr1 min | — | 0.083 in | — | — | — |
| Raceway diameter outer ringE | — | 195.5 mm | — | — | — |
| Raceway diameter outer ringE | — | 7.697 in | — | — | — |
| Raceway diameter inner ringF | — | 143.5 mm | — | — | — |
| Raceway diameter inner ringF | — | 5.65 in | — | — | — |
| Width of loose ribB3 | — | 6 mm | — | — | — |
| Width of loose ribB3 | — | 0.236 in | — | — | — |
| Engineering — Abutment dimensions | |||||
| Diameter of spacer sleeved a | min. 132 mm | — | — | — | — |
| Diameter of shaft abutmentd b | min. 156 mm | — | — | — | — |
| Diameter of housing abutmentD a | max. 201.6 mm | — | — | — | — |
| Radius of filletr a | max. 2 mm | — | — | — | — |
| Engineering — Calculation data | |||||
| SKF performance class | SKF Explorer | — | — | — | — |
| Minimum load factork r | 0.15 | — | — | — | — |
| Limiting valuee | 0.2 | — | — | — | — |
| Calculation factorY | 0.6 | — | — | — | — |
| Engineering — Dimensions | |||||
| Shoulder diameter of inner ringd 1 | ≈ 153 mm | — | — | — | — |
| Shoulder diameter of outer ringD 1 | ≈ 186.83 mm | — | — | — | — |
| Raceway diameter of inner ringF | 143.5 mm | — | — | — | — |
| Chamfer dimensionr 1,2 | min. 2.1 mm | — | — | — | — |
| Chamfer dimension of loose flange ringr 3,4 | min. 2.1 mm | — | — | — | — |
| Load ratings — standard cage | |||||
| Basic dynamic radial load ratingCr | — | — | — | 410000 N | — |
| Basic static radial load ratingC0r | — | — | — | 420000 N | — |
| Logistics | |||||
| Product net weight | 5.95 kg | — | — | — | — |
| eClass code | 23-05-09-01 | — | — | — | — |
| UNSPSC code | 31171505 | — | — | — | — |
| Lubrication-qualified speed — standard cage | |||||
| Thermal speed rating — oil bath | — | — | — | 3600 r/min | — |
| Mechanical limiting speed — forced oil circulation | — | — | — | 5300 r/min | — |
| Limiting speed — grease | — | — | — | 3000 r/min | — |
| Limiting speed — oil bath | — | — | — | 3400 r/min | — |
| Main Dimensions & Performance Data | |||||
| Basic dynamic load rating, radialCr | — | 390,000 N | — | — | — |
| Basic dynamic load rating, radialCr | — | 87,679.856 lbf | — | — | — |
| Basic static load rating, radialC0r | — | 415,000 N | — | — | — |
| Basic static load rating, radialC0r | — | 93,300.36 lbf | — | — | — |
| Fatigue load limit, radialCur | — | 69,000 N | — | — | — |
| Fatigue load limit, radialCur | — | 15,512.59 lbf | — | — | — |
| Manufacturer Identity | |||||
| Schaeffler Product Code | — | 373867 | — | — | — |
| Material Number | — | — | 000000000190032277 | — | — |
| Official Class Key | — | — | — | — | 040-010-000 |
| Base Type | — | NUP224 | — | — | — |
| World Assembly Part Number | — | — | NUP224EMA | — | — |
| Old Designation | — | ["NUP224E.TVP2","NUP224-E-TVP2"] | — | — | — |
| Inner Ring Part Number | — | — | 120ARTE02 | — | — |
| Gpsd Group | — | F01 | — | — | — |
| Outer Ring Part Number | — | — | 120ERUE02 | — | — |
| Product Line Id | — | 63 | — | — | — |
| Drawing Number | — | — | M946606 | — | — |
| X Life Marking | — | XL | — | — | — |
| Upc | — | — | 0053893070254 | — | — |
| Official Source System | — | — | CORE BP - DS DF | — | — |
| Official Last Run | — | — | 2026-08-23T20:02:47.403 | — | — |
| SAP material number | — | 0167411700000 | — | — | — |
| Base product | — | 2305090122 | — | — | — |
| Bearing X designation | — | NUP224-E-XL-TVP2 | — | — | — |
| Mounting Manager ID | — | NUP224-E-XL-TVP2 | — | — | — |
| Grease application ID | — | NUP224-E-XL-TVP2 | — | — | — |
| Mounting dimensions | |||||
| Maximum rib diameter inner ringd1 | — | 153.2 mm | — | — | — |
| Maximum rib diameter inner ringd1 | — | 6.031 in | — | — | — |
| Minimum rib diameter outer ringD1 min | — | 187.8 mm | — | — | — |
| Minimum rib diameter outer ringD1 min | — | 7.394 in | — | — | — |
| Minimum diameter shaft shoulderda min | — | 132 mm | — | — | — |
| Minimum diameter shaft shoulderda min | — | 5.197 in | — | — | — |
| Minimum shaft shoulderdc min | — | 156 mm | — | — | — |
| Minimum shaft shoulderdc min | — | 6.142 in | — | — | — |
| Maximum diameter of housing shoulderDa max | — | 203 mm | — | — | — |
| Maximum diameter of housing shoulderDa max | — | 7.992 in | — | — | — |
| Maximum recess radiusra max | — | 2.1 mm | — | — | — |
| Maximum recess radiusra max | — | 0.083 in | — | — | — |
| Mounting dimensions — shown arrangement | |||||
| Minimum shaft shoulder diameterdb min. | — | — | — | 131 mm | — |
| Maximum housing shoulder diameterDa max. | — | — | — | 204 mm | — |
| Maximum adjacent fillet radiusra max. | — | — | — | 2 mm | — |
| Maximum secondary adjacent fillet radiusrb max. | — | — | — | 2 mm | — |
| Product characteristics | |||||
| DesignE | — | Increased Capacity Design | — | — | — |
| Radial internal clearanceCN (Group N) | — | Normal internal clearance | — | — | — |
| Tolerance classPN | — | Normal (ISO 492:2023) | — | — | — |
| Number of rows1 | — | Single-row design | — | — | — |
| Product identity | |||||
| Official product category | Cylindrical roller bearings | — | — | — | — |
| Official taxonomy path | /products/rolling-bearings/roller-bearings/cylindrical-roller-bearings/single-row-cylindrical-roller-bearings | — | — | — | — |
| Structure group ID | BC1_001_101 | — | — | — | — |
| Available from SKF | Yes | — | — | — | — |
| Remanufacturable | No | — | — | — | — |
| Product Identity | |||||
| Construction | — | Cylindrical roller bearing NUP..-E-XL-TVP2, with cage, single row, locating bearing, 2 ribs on outer ring, 1 rib on inner ring, rib washer internal, type NUP | Single Row Cylindrical Roller Bearing | Imperial Series | 4.7244 in Bore | 8.4646 in OD | 1.5748 in Width | Open | Cylindrical Bore | Machined Window Brass Cage | C0 Clearance | — | — |
| Type Description | — | — | Cylindrical 1-Row | — | — |
| Short Description | — | Cylindrical roller bearing | — | — | — |
| Number Of Rows | 1 | — | 1 | — | — |
| Tapered Bore | — | — | N | — | — |
| Properties | |||||
| Bearing part | Complete bearing | — | — | — | — |
| Axial displacement capability | None | — | — | — | — |
| Locating feature, bearing outer ring | Without | — | — | — | — |
| Bore type | Cylindrical | — | — | — | — |
| Number of flanges, outer ring | 2 | — | — | — | — |
| Number of flanges, inner ring | 1 | — | — | — | — |
| Loose flange | Inner ring loose flange | — | — | — | — |
| Radial internal clearance | CN | — | — | — | — |
| Tolerance class | Normal | — | — | — | — |
| Coating | Without | — | — | — | — |
| Relubrication feature | Without | — | — | — | — |
| Indicative carbon footprint for new product | 22.0 kg CO 2 e | — | — | — | — |
| Technical Data | |||||
| d | — | — | — | — | 215 mm |
| B | — | — | — | — | 40 mm |
| R(Min.) | — | — | — | — | 2.1 mm |
| R1(Min.) | — | — | — | — | 2.1 mm |
| Bore Diameter (D) | — | 120 mm | — | — | — |
| Overall Width | — | — | 0.000 mm | — | — |
| Fw | — | — | — | — | 143.5 mm |
| Outside Diamater (D) | — | 215 mm | — | — | — |
| Radial Rating | — | — | 379,000 N | — | — |
| Ew | — | — | — | — | - mm |
| Total Width (B) | — | 40 mm | — | — | — |
| Axial Rating | — | — | 0 N | — | — |
| Basic Load Ratings : Cr | — | — | — | — | 419 kN |
| Basic Dynamic Load Rating, Radial (Cr) | — | 390,000 N | — | — | — |
| Dynamic Rating C1 | — | — | 379,000 N | — | — |
| Basic Load Ratings : C0R | — | — | — | — | 421 kN |
| Basic Static Load Rating, Radial (C0R) | — | 415,000 N | — | — | — |
| Dynamic Rating C90 | — | — | 0 N | — | — |
| Fatigue Load Limit : Cu | — | — | — | — | 57.6 kN |
| Raceway Diameter Inner Ring (F) | — | 143.5 mm | — | — | — |
| Dynamic Axial Rating Ca90 | — | — | 0 N | — | — |
| Limiting Speeds(Grease Lub.) | — | — | — | — | 2800 min-1 |
| Operating Temperature Min. (Tmin) | — | -30 °C | — | — | — |
| Dynamic Axial Rating Ca1 | — | — | 0 N | — | — |
| Limiting Speeds(Oil Lub.) | — | — | — | — | 3400 min-1 |
| Minimum Diameter Shaft Shoulder (Da) | — | 132 mm | — | — | — |
| Static Radial Rating C0 | — | — | 431,000 N | — | — |
| Sd1 | — | — | — | — | - mm |
| Width Of Loose Rib (B3) | — | 6 mm | — | — | — |
| Extended Dynamic Rating Ce | — | — | 0 N | — | — |
| B1 | — | — | — | — | - mm |
| Operating Temperature Max. (Tmax) | — | 120 °C | — | — | — |
| Static Axial Rating C0A | — | — | 0 N | — | — |
| B2 | — | — | — | — | - mm |
| Limiting Speed (Limiting Spe) | — | 4,350 1/min | — | — | — |
| Da(Min.) | — | — | — | — | 131 mm |
| Minimum Shaft Shoulder (Dc Min) | — | 156 mm | — | — | — |
| Db(Min.) | — | — | — | — | - mm |
| Reference Speed (Nϑr) | — | 3,050 1/min | — | — | — |
| Db(Max.) | — | — | — | — | - mm |
| Maximum Recess Radius (Ra Max) | — | 2.1 mm | — | — | — |
| Dc(Min.) | — | — | — | — | - mm |
| Maximum Diameter Of Housing Shoulder (Da) | — | 203 mm | — | — | — |
| Dd(Min.) | — | — | — | — | - mm |
| Maximum Rib Diameter Inner Ring (D1) | — | 153.2 mm | — | — | — |
| Da(Max.) | — | — | — | — | 204 mm |
| Minimum Chamfer Dimension (R1 Min) | — | 2.1 mm | — | — | — |
| Minimum Rib Diameter Outer Ring (D1 Min) | — | 187.8 mm | — | — | — |
| Minimum Chamfer Dimension (Rmin) | — | 2.1 mm | — | — | — |
| Ra(Max.) | — | — | — | — | 2 mm |
| Raceway Diameter Outer Ring (E) | — | 195.5 mm | — | — | — |
| Rb(Max.) | — | — | — | — | 2 mm |
| Fatigue Load Limit, Radial (Cur) | — | 69,000 N | — | — | — |
| Mass(Refer.) | — | — | — | — | 6.17 kg |
| Temperature range | |||||
| Operating temperature min.Tmin | — | -30 °C | — | — | — |
| Operating temperature min.Tmin | — | -22 °F | — | — | — |
| Operating temperature max.Tmax | — | 120 °C | — | — | — |
| Operating temperature max.Tmax | — | 248 °F | — | — | — |
Automatic matching is a search aid, not an interchangeability declaration. Confirm the full suffix, tolerances, internal design and application limits before substitution.