Cross-brand designation analysis
COMPARE / VERIFY
Same-model Comparison
Explore products that share a base designation across loaded brands, with dimensional agreement and data gaps shown clearly.
Cross Reference centre · Interchange verification checklist · Understand suffix differences
You entered NUP2204R. This table explores the base group NUP2204; it does not preserve or approve every requested suffix. Search your complete marking first →
Automatic candidate selection
One base designation across loaded brands
Exact designations rank first. Dimensions, suffixes and other technical differences remain visible so the result is not mistaken for an interchangeability declaration.
Dimensions verified
“NUP2204” across 2 loaded brands
At least two brands share the same bore, outside diameter and width. Use Custom Compare when you want to choose exact suffix variants yourself.
Technical comparison
Choose exact variants instead →Brand differences at a glance
| Parameter | FAGNUP2204-E-XL-TVP220 × 47 × 18 mm | KOYONUP220420 × 47 × 18 mm |
|---|---|---|
| Comparable specifications | ||
| Brand | FAG | KOYO |
| Designation | NUP2204-E-XL-TVP2 | NUP2204 |
| Product family | — | Single-row / NUP |
| Detailed type | Cylindrical roller bearings | Cylindrical roller bearings |
| Series | NUP2204 | — |
| Bore diameterd | 20 mm | 20 mm |
| Outside diameterD | 47 mm | 47 mm |
| WidthB | 18 mm | 18 mm |
| Basic dynamic load ratingC | 38.5 kN | 27.8 kN |
| Basic static load ratingC0 | 31 kN | 18.4 kN |
| Fatigue load limitPu | 5.2 kN | 2.7 kN |
| Reference speednref | 11100 r/min | — |
| Limiting speednG | 22000 r/min | 13000 r/min |
| Mass≈m | 0.149 kg | 0.152 kg |
| Precision class | PN — Normal (ISO 492:2023) | — |
| Internal clearance | CN (Group N) — Normal internal clearance | — |
| Cage | TVP2 — Solid Window Cage made from PA66 | — |
| Minimum operating temperatureTmin | -30 °C | — |
| Maximum operating temperatureTmax | 120 °C | — |
| Capabilities & suitability | ||
| Radial load capacity | Yes | — |
| Axial load capacity in one direction | Yes | — |
| Axial load capacity in both directions | Yes | — |
| Suitable for grease lubrication | Yes | — |
| Suitable for oil lubrication | Yes | — |
| Unsealed design | Yes | — |
| Classification | ||
| Official Category Path | — | Cylindrical roller bearings - Single-row - NUP |
| Official Classification 1 | — | Cylindrical roller bearings / Single-row / NUP |
| Dimensions | ||
| Minimum chamfer dimensionrmin | 1 mm | — |
| Minimum chamfer dimensionrmin | 0.039 in | — |
| Minimum chamfer dimensionr1 min | 0.6 mm | — |
| Minimum chamfer dimensionr1 min | 0.024 in | — |
| Raceway diameter outer ringE | 41.5 mm | — |
| Raceway diameter outer ringE | 1.634 in | — |
| Raceway diameter inner ringF | 26.5 mm | — |
| Raceway diameter inner ringF | 1.043 in | — |
| Width of loose ribB3 | 3.5 mm | — |
| Width of loose ribB3 | 0.138 in | — |
| Main Dimensions & Performance Data | ||
| Basic dynamic load rating, radialCr | 38,500 N | — |
| Basic dynamic load rating, radialCr | 8,655.576 lbf | — |
| Basic static load rating, radialC0r | 31,000 N | — |
| Basic static load rating, radialC0r | 6,969.424 lbf | — |
| Fatigue load limit, radialCur | 5,200 N | — |
| Fatigue load limit, radialCur | 1,169.065 lbf | — |
| Manufacturer Identity | ||
| Schaeffler Product Code | 373796 | — |
| Official Class Key | — | 040-010-000 |
| Base Type | NUP2204 | — |
| Old Designation | ["NUP2204E.TVP2","NUP2204-E-TVP2"] | — |
| Gpsd Group | F01 | — |
| Product Line Id | 12 | — |
| X Life Marking | XL | — |
| SAP material number | 0192526250000 | — |
| Base product | 2305090122 | — |
| Bearing X designation | NUP2204-E-XL-TVP2 | — |
| Mounting Manager ID | NUP2204-E-XL-TVP2 | — |
| Grease application ID | NUP2204-E-XL-TVP2 | — |
| Mounting dimensions | ||
| Maximum rib diameter inner ringd1 | 29.7 mm | — |
| Maximum rib diameter inner ringd1 | 1.169 in | — |
| Minimum rib diameter outer ringD1 min | 38.8 mm | — |
| Minimum rib diameter outer ringD1 min | 1.528 in | — |
| Minimum diameter shaft shoulderda min | 24 mm | — |
| Minimum diameter shaft shoulderda min | 0.945 in | — |
| Minimum shaft shoulderdc min | 32 mm | — |
| Minimum shaft shoulderdc min | 1.26 in | — |
| Maximum diameter of housing shoulderDa max | 41 mm | — |
| Maximum diameter of housing shoulderDa max | 1.614 in | — |
| Maximum recess radiusra max | 1 mm | — |
| Maximum recess radiusra max | 0.039 in | — |
| Product characteristics | ||
| DesignE | Increased Capacity Design | — |
| Radial internal clearanceCN (Group N) | Normal internal clearance | — |
| Tolerance classPN | Normal (ISO 492:2023) | — |
| Number of rows1 | Single-row design | — |
| Product Identity | ||
| Construction | Cylindrical roller bearing NUP..-E-XL-TVP2, with cage, single row, locating bearing, 2 ribs on outer ring, 1 rib on inner ring, rib washer internal, type NUP | — |
| Short Description | Cylindrical roller bearing | — |
| Technical Data | ||
| d | — | 47 mm |
| B | — | 18 mm |
| R(Min.) | — | 1 mm |
| R1(Min.) | — | 0.6 mm |
| Bore Diameter (D) | 20 mm | — |
| Fw | — | 27 mm |
| Outside Diamater (D) | 47 mm | — |
| Ew | — | - mm |
| Total Width (B) | 18 mm | — |
| Basic Load Ratings : Cr | — | 27.8 kN |
| Basic Dynamic Load Rating, Radial (Cr) | 38,500 N | — |
| Basic Load Ratings : C0R | — | 18.4 kN |
| Basic Static Load Rating, Radial (C0R) | 31,000 N | — |
| Fatigue Load Limit : Cu | — | 2.70 kN |
| Raceway Diameter Inner Ring (F) | 26.5 mm | — |
| Limiting Speeds(Grease Lub.) | — | 13000 min-1 |
| Operating Temperature Min. (Tmin) | -30 °C | — |
| Limiting Speeds(Oil Lub.) | — | 18000 min-1 |
| Minimum Diameter Shaft Shoulder (Da) | 24 mm | — |
| Sd1 | — | - mm |
| Width Of Loose Rib (B3) | 3.5 mm | — |
| B1 | — | - mm |
| Operating Temperature Max. (Tmax) | 120 °C | — |
| B2 | — | - mm |
| Limiting Speed (Limiting Spe) | 22,000 1/min | — |
| Da(Min.) | — | 25 mm |
| Minimum Shaft Shoulder (Dc Min) | 32 mm | — |
| Db(Min.) | — | - mm |
| Reference Speed (Nϑr) | 11,100 1/min | — |
| Db(Max.) | — | - mm |
| Maximum Recess Radius (Ra Max) | 1 mm | — |
| Dc(Min.) | — | - mm |
| Maximum Diameter Of Housing Shoulder (Da) | 41 mm | — |
| Dd(Min.) | — | - mm |
| Maximum Rib Diameter Inner Ring (D1) | 29.7 mm | — |
| Da(Max.) | — | 42 mm |
| Minimum Chamfer Dimension (R1 Min) | 0.6 mm | — |
| Minimum Rib Diameter Outer Ring (D1 Min) | 38.8 mm | — |
| Minimum Chamfer Dimension (Rmin) | 1 mm | — |
| Ra(Max.) | — | 1 mm |
| Raceway Diameter Outer Ring (E) | 41.5 mm | — |
| Rb(Max.) | — | 0.6 mm |
| Fatigue Load Limit, Radial (Cur) | 5,200 N | — |
| Mass(Refer.) | — | 0.152 kg |
| Temperature range | ||
| Operating temperature min.Tmin | -30 °C | — |
| Operating temperature min.Tmin | -22 °F | — |
| Operating temperature max.Tmax | 120 °C | — |
| Operating temperature max.Tmax | 248 °F | — |
Automatic matching is a search aid, not an interchangeability declaration. Confirm the full suffix, tolerances, internal design and application limits before substitution.