Cross-brand designation analysis
COMPARE / VERIFY
Same-model Comparison
Explore products that share a base designation across loaded brands, with dimensional agreement and data gaps shown clearly.
Cross Reference centre · Interchange verification checklist · Understand suffix differences
You entered NU417MAC3. This table explores the base group NU417; it does not preserve or approve every requested suffix. Search your complete marking first →
Automatic candidate selection
One base designation across loaded brands
Exact designations rank first. Dimensions, suffixes and other technical differences remain visible so the result is not mistaken for an interchangeability declaration.
Dimensions verified
“NU417” across 3 loaded brands
At least two brands share the same bore, outside diameter and width. Use Custom Compare when you want to choose exact suffix variants yourself.
Technical comparison
Choose exact variants instead →Brand differences at a glance
| Parameter | FAGNU417-XL-M185 × 210 × 52 mm | TIMKENNU417MAC385 × 210 × 52 mm | KOYONU41785 × 210 × 52 mm |
|---|---|---|---|
| Comparable specifications | |||
| Brand | FAG | TIMKEN | KOYO |
| Designation | NU417-XL-M1 | NU417MAC3 | NU417 |
| Product family | — | Cylindrical 1-Row | Single-row / NU |
| Detailed type | Cylindrical roller bearings | Cylindrical roller bearings | Cylindrical roller bearings |
| Series | NU417 | NCS-231684 | — |
| Bore diameterd | 85 mm | 85 mm | 85 mm |
| Outside diameterD | 210 mm | 210 mm | 210 mm |
| WidthB | 52 mm | 52 mm | 52 mm |
| Basic dynamic load ratingC | 420 kN | 409 kN | 416 kN |
| Basic static load ratingC0 | 385 kN | 398 kN | 350 kN |
| Fatigue load limitPu | 49 kN | — | 49.7 kN |
| Reference speednref | 3850 r/min | — | — |
| Limiting speednG | 6000 r/min | — | 3000 r/min |
| Mass≈m | 9.55 kg | 9.6 kg | 8.68 kg |
| Precision class | PN — Normal (ISO 492:2023) | — | — |
| Internal clearance | CN (Group N) — Normal internal clearance | — | — |
| Sealing | — | Open | — |
| Cage | M1 — Two Piece Brass Cage Roller Guided | Window Brass cage | — |
| Minimum operating temperatureTmin | -30 °C | — | — |
| Maximum operating temperatureTmax | 150 °C | — | — |
| Calculation Factors | |||
| K Factor | — | 0.00 | — |
| Y1 Factor | — | 0.00 | — |
| Y2 Factor | — | 0.00 | — |
| Y0 Factor | — | 0.00 | — |
| E Factor | — | 0.00 | — |
| Cg Factor | — | 0.0954 | — |
| Capabilities & suitability | |||
| Radial load capacity | Yes | — | — |
| Suitable for grease lubrication | Yes | — | — |
| Suitable for oil lubrication | Yes | — | — |
| Unsealed design | Yes | — | — |
| Classification | |||
| Official Category Path | — | — | Cylindrical roller bearings - Single-row - NU |
| Official Classification 1 | — | — | Cylindrical roller bearings / Single-row / NU |
| Dimensions | |||
| Minimum chamfer dimensionrmin | 4 mm | — | — |
| Minimum chamfer dimensionrmin | 0.157 in | — | — |
| Minimum chamfer dimensionr1 min | 4 mm | — | — |
| Minimum chamfer dimensionr1 min | 0.157 in | — | — |
| Axial displacements | 5.2 mm | — | — |
| Axial displacements | 0.205 in | — | — |
| Raceway diameter outer ringE | 177 mm | — | — |
| Raceway diameter outer ringE | 6.969 in | — | — |
| Raceway diameter inner ringF | 113 mm | — | — |
| Raceway diameter inner ringF | 4.449 in | — | — |
| Minimum rib diameter outer ringD1 min | 165.7 mm | — | — |
| Minimum rib diameter outer ringD1 min | 6.524 in | — | — |
| Main Dimensions & Performance Data | |||
| Basic dynamic load rating, radialCr | 420,000 N | — | — |
| Basic dynamic load rating, radialCr | 94,424.46 lbf | — | — |
| Basic static load rating, radialC0r | 385,000 N | — | — |
| Basic static load rating, radialC0r | 86,555.755 lbf | — | — |
| Fatigue load limit, radialCur | 49,000 N | — | — |
| Fatigue load limit, radialCur | 11,016.187 lbf | — | — |
| Manufacturer Identity | |||
| Schaeffler Product Code | 369396 | — | — |
| Material Number | — | 000000000190052033 | — |
| Official Class Key | — | — | 040-010-000 |
| Base Type | NU417 | — | — |
| World Assembly Part Number | — | NU417MA | — |
| Old Designation | ["NU417-M1","NU417M1"] | — | — |
| Inner Ring Part Number | — | 85ARUA04 | — |
| Gpsd Group | F01 | — | — |
| Outer Ring Part Number | — | 85ERUA04 | — |
| Product Line Id | 63 | — | — |
| Drawing Number | — | M957282 | — |
| X Life Marking | XL | — | — |
| Upc | — | 0013992240897 | — |
| Official Source System | — | CORE BP - DS DF | — |
| Official Last Run | — | 2026-08-23T20:02:48.583 | — |
| SAP material number | 0192507890000 | — | — |
| Base product | 2305090102 | — | — |
| Bearing X designation | NU417-XL-M1 | — | — |
| Mounting Manager ID | NU417-XL-M1 | — | — |
| Grease application ID | NU417-XL-M1 | — | — |
| Mounting dimensions | |||
| Minimum diameter shaft shoulderda min | 105 mm | — | — |
| Minimum diameter shaft shoulderda min | 4.134 in | — | — |
| Maximum diameter of shaft shoulderda max | 111 mm | — | — |
| Maximum diameter of shaft shoulderda max | 4.37 in | — | — |
| Minimum shaft shoulderdb min | 115 mm | — | — |
| Minimum shaft shoulderdb min | 4.528 in | — | — |
| Maximum diameter of housing shoulderDa max | 190 mm | — | — |
| Maximum diameter of housing shoulderDa max | 7.48 in | — | — |
| Maximum recess radiusra max | 3 mm | — | — |
| Maximum recess radiusra max | 0.118 in | — | — |
| Maximum recess radiusra1 max | 3 mm | — | — |
| Maximum recess radiusra1 max | 0.118 in | — | — |
| Product characteristics | |||
| Design | Standard | — | — |
| Radial internal clearanceCN (Group N) | Normal internal clearance | — | — |
| Tolerance classPN | Normal (ISO 492:2023) | — | — |
| Number of rows1 | Single-row design | — | — |
| Product Identity | |||
| Construction | Cylindrical roller bearing NU..-XL-M1, with cage, single row, non-locating bearing, 2 ribs on outer ring, 0 ribs on inner ring (smooth), type NU, Running accuracy in P6 | Single Row Cylindrical Roller Bearing | Imperial Series | 3.3465 in Bore | 8.2677 in OD | 2.0472 in Width | Open | Cylindrical Bore | Machined Window Brass Cage | C3 Clearance | — |
| Type Description | — | Cylindrical 1-Row | — |
| Short Description | Cylindrical roller bearing | — | — |
| Number Of Rows | — | 1 | — |
| Tapered Bore | — | N | — |
| Technical Data | |||
| d | — | — | 210 mm |
| B | — | — | 52 mm |
| R(Min.) | — | — | 4 mm |
| R1(Min.) | — | — | 4 mm |
| Bore Diameter (D) | 85 mm | — | — |
| Overall Width | — | 0.000 mm | — |
| Fw | — | — | 113 mm |
| Outside Diamater (D) | 210 mm | — | — |
| Radial Rating | — | 409,000 N | — |
| Ew | — | — | - mm |
| Total Width (B) | 52 mm | — | — |
| Axial Rating | — | 0 N | — |
| Basic Load Ratings : Cr | — | — | 416 kN |
| Basic Dynamic Load Rating, Radial (Cr) | 420,000 N | — | — |
| Dynamic Rating C1 | — | 409,000 N | — |
| Basic Load Ratings : C0R | — | — | 350 kN |
| Basic Static Load Rating, Radial (C0R) | 385,000 N | — | — |
| Dynamic Rating C90 | — | 0 N | — |
| Fatigue Load Limit : Cu | — | — | 49.7 kN |
| Raceway Diameter Inner Ring (F) | 113 mm | — | — |
| Dynamic Axial Rating Ca90 | — | 0 N | — |
| Limiting Speeds(Grease Lub.) | — | — | 3000 min-1 |
| Operating Temperature Min. (Tmin) | -30 °C | — | — |
| Dynamic Axial Rating Ca1 | — | 0 N | — |
| Limiting Speeds(Oil Lub.) | — | — | 4000 min-1 |
| Minimum Diameter Shaft Shoulder (Da) | 105 mm | — | — |
| Static Radial Rating C0 | — | 398,000 N | — |
| Sd1 | — | — | - mm |
| Operating Temperature Max. (Tmax) | 150 °C | — | — |
| Extended Dynamic Rating Ce | — | 0 N | — |
| B1 | — | — | - mm |
| Limiting Speed (Limiting Spe) | 6,000 1/min | — | — |
| Static Axial Rating C0A | — | 0 N | — |
| B2 | — | — | - mm |
| Reference Speed (Nϑr) | 3,850 1/min | — | — |
| Da(Min.) | — | — | - mm |
| Maximum Recess Radius (Ra Max) | 3 mm | — | — |
| Db(Min.) | — | — | - mm |
| Maximum Diameter Of Housing Shoulder (Da) | 190 mm | — | — |
| Db(Max.) | — | — | - mm |
| Minimum Chamfer Dimension (R1 Min) | 4 mm | — | — |
| Dc(Min.) | — | — | - mm |
| Axial Displacement (S) | 5.2 mm | — | — |
| Dd(Min.) | — | — | - mm |
| Minimum Rib Diameter Outer Ring (D1 Min) | 165.7 mm | — | — |
| Da(Max.) | — | — | 194 mm |
| Maximum Diameter Of Shaft Shoulder (Da Max) | 111 mm | — | — |
| Maximum Recess Radius (Ra1 Max) | 3 mm | — | — |
| Minimum Chamfer Dimension (Rmin) | 4 mm | — | — |
| Ra(Max.) | — | — | 3 mm |
| Raceway Diameter Outer Ring (E) | 177 mm | — | — |
| Rb(Max.) | — | — | 3 mm |
| Minimum Shaft Shoulder (Db Min) | 115 mm | — | — |
| Mass(Refer.) | — | — | 8.68 kg |
| Fatigue Load Limit, Radial (Cur) | 49,000 N | — | — |
| Temperature range | |||
| Operating temperature min.Tmin | -30 °C | — | — |
| Operating temperature min.Tmin | -22 °F | — | — |
| Operating temperature max.Tmax | 150 °C | — | — |
| Operating temperature max.Tmax | 302 °F | — | — |
Automatic matching is a search aid, not an interchangeability declaration. Confirm the full suffix, tolerances, internal design and application limits before substitution.