Cross-brand designation analysis
COMPARE / VERIFY
Same-model Comparison
Explore products that share a base designation across loaded brands, with dimensional agreement and data gaps shown clearly.
Cross Reference centre · Interchange verification checklist · Understand suffix differences
You entered NU352-E-TB-M1. This table explores the base group NU352; it does not preserve or approve every requested suffix. Search your complete marking first →
Automatic candidate selection
One base designation across loaded brands
Exact designations rank first. Dimensions, suffixes and other technical differences remain visible so the result is not mistaken for an interchangeability declaration.
Designation candidates
“NU352” across 2 loaded brands
One highest-ranked designation candidate is shown per manufacturer. Use Custom Compare when you want to choose exact suffix variants yourself.
Technical comparison
Choose exact variants instead →Brand differences at a glance
| Parameter | FAGNU352-E-TB-M1260 × 540 × 102 mm | NSKNU352M260 × 540 × 102 mm |
|---|---|---|
| Comparable specifications | ||
| Brand | FAG | NSK |
| Designation | NU352-E-TB-M1 | NU352M |
| Product family | — | Cylindrical roller bearing |
| Detailed type | Cylindrical roller bearings | Cylindrical roller bearings |
| Series | NU352 | — |
| Bore diameterd | 260 mm | 260 mm |
| Outside diameterD | 540 mm | 540 mm |
| WidthB | 102 mm | 102 mm |
| Basic dynamic load ratingC | 1910 kN | 1900 kN |
| Basic static load ratingC0 | 2600 kN | 2090 kN |
| Fatigue load limitPu | 187 kN | — |
| Reference speednref | 900 r/min | — |
| Limiting speednG | 1840 r/min | — |
| Mass≈m | 117.8 kg | — |
| Precision class | PN — Normal (ISO 492:2023) | — |
| Internal clearance | CN (Group N) — Normal internal clearance | — |
| Cage | M1 — Two Piece Brass Cage Roller Guided | Machined brass |
| Minimum operating temperatureTmin | -30 °C | — |
| Maximum operating temperatureTmax | 150 °C | — |
| Boundary dimensions | ||
| Bearing widthB | — | 102 mm |
| Minimum bearing chamferr min. | — | 6 mm |
| Minimum secondary bearing chamferr1 min. | — | 6 mm |
| Roller inscribed circle diameterFw | — | 336 mm |
| Capabilities & suitability | ||
| Radial load capacity | Yes | — |
| Suitable for grease lubrication | Yes | — |
| Suitable for oil lubrication | Yes | — |
| Unsealed design | Yes | — |
| Largebearing | Yes | — |
| Catalogue reference mass | ||
| Approximate shared-row mass — not separately stated for each rib arrangement | — | 118 kg |
| Construction | ||
| Single-row construction type | — | NU |
| Rib arrangement | — | Two outer-ring ribs; ribless inner ring |
| Standard cage material | — | Machined brass |
| Standard cage marking | — | M |
| Other cage codes listed for this catalogue row | — | None listed in this row |
| Precision — designation omission rule | — | ISO Normal when no precision suffix is specified |
| Clearance identification — verify interchangeability | — | No clearance suffix shown. CN omission applies to interchangeable designs; do not infer a numerical clearance. |
| Optimized crowning note | — | No optimized-crowning asterisk on this row |
| Dimensions | ||
| Minimum chamfer dimensionrmin | 6 mm | — |
| Minimum chamfer dimensionrmin | 0.236 in | — |
| Minimum chamfer dimensionr1 min | 6 mm | — |
| Minimum chamfer dimensionr1 min | 0.236 in | — |
| Axial displacements | 10 mm | — |
| Axial displacements | 0.394 in | — |
| Raceway diameter outer ringE | 477 mm | — |
| Raceway diameter outer ringE | 18.78 in | — |
| Raceway diameter inner ringF | 337 mm | — |
| Raceway diameter inner ringF | 13.268 in | — |
| Minimum rib diameter outer ringD1 min | 449 mm | — |
| Minimum rib diameter outer ringD1 min | 17.677 in | — |
| Load ratings — standard cage | ||
| Basic dynamic radial load ratingCr | — | 1900000 N |
| Basic static radial load ratingC0r | — | 2090000 N |
| Lubrication-qualified speed — standard cage | ||
| Thermal speed rating — oil bath | — | 1100 r/min |
| Mechanical limiting speed — forced oil circulation | — | Not stated in this catalogue row |
| Limiting speed — grease | — | 1000 r/min |
| Limiting speed — oil bath | — | 1200 r/min |
| Main Dimensions & Performance Data | ||
| Basic dynamic load rating, radialCr | 1,910,000 N | — |
| Basic dynamic load rating, radialCr | 429,406.475 lbf | — |
| Basic static load rating, radialC0r | 2,600,000 N | — |
| Basic static load rating, radialC0r | 584,532.374 lbf | — |
| Fatigue load limit, radialCur | 187,000 N | — |
| Fatigue load limit, radialCur | 42,041.367 lbf | — |
| Manufacturer Identity | ||
| Schaeffler Product Code | 371040 | — |
| Base Type | NU352 | — |
| Gpsd Group | F01 | — |
| Product Line Id | 75 | — |
| SAP material number | 0801987240000 | — |
| Base product | 2305090102 | — |
| Bearing X designation | NU352-E-TB-M1 | — |
| Mounting Manager ID | NU352-E-TB-M1 | — |
| Grease application ID | NU352-E-TB-M1 | — |
| Mounting dimensions | ||
| Minimum diameter shaft shoulderda min | 286 mm | — |
| Minimum diameter shaft shoulderda min | 11.26 in | — |
| Maximum diameter of shaft shoulderda max | 334.3 mm | — |
| Maximum diameter of shaft shoulderda max | 13.161 in | — |
| Minimum shaft shoulderdb min | 339.7 mm | — |
| Minimum shaft shoulderdb min | 13.374 in | — |
| Maximum diameter of housing shoulderDa max | 514 mm | — |
| Maximum diameter of housing shoulderDa max | 20.236 in | — |
| Maximum recess radiusra max | 5 mm | — |
| Maximum recess radiusra max | 0.197 in | — |
| Maximum recess radiusra1 max | 5 mm | — |
| Maximum recess radiusra1 max | 0.197 in | — |
| Mounting dimensions — shown arrangement | ||
| Minimum shaft shoulder diameterdb min. | — | 286 mm |
| Maximum housing shoulder diameterDa max. | — | 514 mm |
| Maximum adjusting-ring diameter (NU/NJ arrangement)db max. | — | 330 mm |
| Maximum adjacent fillet radiusra max. | — | 5 mm |
| Maximum secondary adjacent fillet radiusrb max. | — | 5 mm |
| Product characteristics | ||
| DesignTB | Bearings with increased axial load capacity | — |
| Radial internal clearanceCN (Group N) | Normal internal clearance | — |
| Tolerance classPN | Normal (ISO 492:2023) | — |
| Number of rows1 | Single-row design | — |
| Product Identity | ||
| Construction | Cylindrical roller bearing NU20..-E-XL-M1, with cage, single row, non-locating bearing, 2 ribs on outer ring, 0 ribs on inner ring (smooth), type NU, Running accuracy in P6 | — |
| Short Description | Cylindrical roller bearing | — |
| Technical Data | ||
| Bore Diameter (D) | 260 mm | — |
| Outside Diamater (D) | 540 mm | — |
| Total Width (B) | 102 mm | — |
| Basic Dynamic Load Rating, Radial (Cr) | 1,910,000 N | — |
| Basic Static Load Rating, Radial (C0R) | 2,600,000 N | — |
| Raceway Diameter Inner Ring (F) | 337 mm | — |
| Operating Temperature Min. (Tmin) | -30 °C | — |
| Minimum Diameter Shaft Shoulder (Da) | 286 mm | — |
| Operating Temperature Max. (Tmax) | 150 °C | — |
| Limiting Speed (Limiting Spe) | 1,840 1/min | — |
| Reference Speed (Nϑr) | 900 1/min | — |
| Maximum Recess Radius (Ra Max) | 5 mm | — |
| Maximum Diameter Of Housing Shoulder (Da) | 514 mm | — |
| Minimum Chamfer Dimension (R1 Min) | 6 mm | — |
| Axial Displacement (S) | 10 mm | — |
| Minimum Rib Diameter Outer Ring (D1 Min) | 449 mm | — |
| Maximum Diameter Of Shaft Shoulder (Da Max) | 334.3 mm | — |
| Maximum Recess Radius (Ra1 Max) | 5 mm | — |
| Minimum Chamfer Dimension (Rmin) | 6 mm | — |
| Raceway Diameter Outer Ring (E) | 477 mm | — |
| Minimum Shaft Shoulder (Db Min) | 339.7 mm | — |
| Fatigue Load Limit, Radial (Cur) | 187,000 N | — |
| Temperature range | ||
| Operating temperature min.Tmin | -30 °C | — |
| Operating temperature min.Tmin | -22 °F | — |
| Operating temperature max.Tmax | 150 °C | — |
| Operating temperature max.Tmax | 302 °F | — |
Automatic matching is a search aid, not an interchangeability declaration. Confirm the full suffix, tolerances, internal design and application limits before substitution.