Cross-brand designation analysis
COMPARE / VERIFY
Same-model Comparison
Explore products that share a base designation across loaded brands, with dimensional agreement and data gaps shown clearly.
Cross Reference centre · Interchange verification checklist · Understand suffix differences
You entered NU2372-E-M1A-C3. This table explores the base group NU2372; it does not preserve or approve every requested suffix. Search your complete marking first →
Automatic candidate selection
One base designation across loaded brands
Exact designations rank first. Dimensions, suffixes and other technical differences remain visible so the result is not mistaken for an interchangeability declaration.
Dimensions verified
“NU2372” across 2 loaded brands
At least two brands share the same bore, outside diameter and width. Use Custom Compare when you want to choose exact suffix variants yourself.
Technical comparison
Choose exact variants instead →Brand differences at a glance
| Parameter | SKFNU 2372 ECMA360 × 750 × 224 mm | FAGNU2372-E-M1A360 × 750 × 224 mm |
|---|---|---|
| Comparable specifications | ||
| Brand | SKF | FAG |
| Designation | NU 2372 ECMA | NU2372-E-M1A |
| Product family | Cylindrical roller bearings | — |
| Detailed type | Single row cylindrical roller bearing, nu design | Cylindrical roller bearings |
| Series | — | NU2372 |
| Bore diameterd | 360 mm | 360 mm |
| Outside diameterD | 750 mm | 750 mm |
| WidthB | 224 mm | 224 mm |
| Basic dynamic load ratingC | 5010 kN | 5500 kN |
| Basic static load ratingC0 | 8150 kN | 8300 kN |
| Fatigue load limitPu | 630 kN | 740 kN |
| Reference speednref | 750 r/min | 420 r/min |
| Limiting speednG | 1300 r/min | 1260 r/min |
| Mass≈m | 516 kg | 485.34 kg |
| Precision class | — | PN — Normal (ISO 492:2023) |
| Internal clearance | CN | CN (Group N) — Normal internal clearance |
| Sealing | Without | — |
| Cage | Machined brass | M1A — Two Piece Brass Cage Lip guided |
| Lubricant | None | — |
| Minimum operating temperatureTmin | — | -30 °C |
| Maximum operating temperatureTmax | — | 150 °C |
| Capabilities & suitability | ||
| Radial load capacity | — | Yes |
| Suitable for grease lubrication | — | Yes |
| Suitable for oil lubrication | — | Yes |
| Unsealed design | — | Yes |
| Dimensions | ||
| Minimum chamfer dimensionrmin | — | 7.5 mm |
| Minimum chamfer dimensionrmin | — | 0.295 in |
| Minimum chamfer dimensionr1 min | — | 7.5 mm |
| Minimum chamfer dimensionr1 min | — | 0.295 in |
| Axial displacements | — | 19 mm |
| Axial displacements | — | 0.748 in |
| Raceway diameter outer ringE | — | 665 mm |
| Raceway diameter outer ringE | — | 26.181 in |
| Raceway diameter inner ringF | — | 445 mm |
| Raceway diameter inner ringF | — | 17.52 in |
| Minimum rib diameter outer ringD1 min | — | 630 mm |
| Minimum rib diameter outer ringD1 min | — | 24.803 in |
| Engineering — Abutment dimensions | ||
| Diameter of spacer sleeved a | max. 453 mm | — |
| Diameter of shaft abutmentd b | min. 470 mm | — |
| Diameter of housing abutmentD a | max. 718 mm | — |
| Radius of filletr a | max. 6 mm | — |
| Engineering — Calculation data | ||
| Minimum load factork r | 0.38 | — |
| Limiting valuee | 0.3 | — |
| Calculation factorY | 0.4 | — |
| Engineering — Dimensions | ||
| Shoulder diameter of outer ringD 1 | ≈ 617 mm | — |
| Raceway diameter of inner ringF | 465 mm | — |
| Chamfer dimensionr 1,2 | min. 7.5 mm | — |
| Permissible axial displacements | max. 10 mm | — |
| Logistics | ||
| Product net weight | 516.0 kg | — |
| eClass code | 23-05-09-01 | — |
| UNSPSC code | 31171505 | — |
| Main Dimensions & Performance Data | ||
| Basic dynamic load rating, radialCr | — | 5,500,000 N |
| Basic dynamic load rating, radialCr | — | 1,236,510.791 lbf |
| Basic static load rating, radialC0r | — | 8,300,000 N |
| Basic static load rating, radialC0r | — | 1,866,007.194 lbf |
| Fatigue load limit, radialCur | — | 740,000 N |
| Fatigue load limit, radialCur | — | 166,366.906 lbf |
| Manufacturer Identity | ||
| Schaeffler Product Code | — | 367894 |
| Base Type | — | NU2372 |
| Old Designation | — | ["NU2372E.M1A"] |
| Gpsd Group | — | F01 |
| Product Line Id | — | 75 |
| SAP material number | — | 0388835890000 |
| Base product | — | 2305090102 |
| Mounting dimensions | ||
| Minimum diameter shaft shoulderda min | — | 392 mm |
| Minimum diameter shaft shoulderda min | — | 15.433 in |
| Maximum diameter of shaft shoulderda max | — | 441 mm |
| Maximum diameter of shaft shoulderda max | — | 17.362 in |
| Minimum shaft shoulderdb min | — | 449 mm |
| Minimum shaft shoulderdb min | — | 17.677 in |
| Maximum diameter of housing shoulderDa max | — | 718 mm |
| Maximum diameter of housing shoulderDa max | — | 28.268 in |
| Maximum recess radiusra max | — | 6 mm |
| Maximum recess radiusra max | — | 0.236 in |
| Maximum recess radiusra1 max | — | 6 mm |
| Maximum recess radiusra1 max | — | 0.236 in |
| Product characteristics | ||
| DesignE | — | Increased Capacity Design |
| Radial internal clearanceCN (Group N) | — | Normal internal clearance |
| Tolerance classPN | — | Normal (ISO 492:2023) |
| Number of rows1 | — | Single-row design |
| Product identity | ||
| Official product category | Cylindrical roller bearings | — |
| Official taxonomy path | /products/rolling-bearings/roller-bearings/cylindrical-roller-bearings/single-row-cylindrical-roller-bearings | — |
| Structure group ID | BC1_001_101 | — |
| Available from SKF | Yes | — |
| Remanufacturable | Yes | — |
| Product Identity | ||
| Construction | — | Cylindrical roller bearing NU..-E-M1A, with cage, single row, non-locating bearing, 2 ribs on outer ring, 0 ribs on inner ring (smooth), type NU, Running accuracy in P6 |
| Short Description | — | Cylindrical roller bearing |
| Properties | ||
| Bearing part | Complete bearing | — |
| Axial displacement capability | In both directions | — |
| Number of rows | 1 | — |
| Locating feature, bearing outer ring | Without | — |
| Bore type | Cylindrical | — |
| Number of flanges, outer ring | 2 | — |
| Number of flanges, inner ring | 0 | — |
| Loose flange | None | — |
| Radial internal clearance | CN | — |
| Tolerance class | Normal | — |
| Coating | Without | — |
| Relubrication feature | Without | — |
| Candidate for remanufacturing | Yes | — |
| Indicative carbon footprint for new product | 1909.0 kg CO 2 e | — |
| Indicative carbon footprint for remanufactured product | 635.0 kg CO 2 e | — |
| Technical Data | ||
| Bore Diameter (D) | — | 360 mm |
| Outside Diamater (D) | — | 750 mm |
| Total Width (B) | — | 224 mm |
| Basic Dynamic Load Rating, Radial (Cr) | — | 5,500,000 N |
| Basic Static Load Rating, Radial (C0R) | — | 8,300,000 N |
| Raceway Diameter Inner Ring (F) | — | 445 mm |
| Operating Temperature Min. (Tmin) | — | -30 °C |
| Minimum Diameter Shaft Shoulder (Da) | — | 392 mm |
| Operating Temperature Max. (Tmax) | — | 150 °C |
| Limiting Speed (Limiting Spe) | — | 1,260 1/min |
| Reference Speed (Nϑr) | — | 420 1/min |
| Maximum Recess Radius (Ra Max) | — | 6 mm |
| Maximum Diameter Of Housing Shoulder (Da) | — | 718 mm |
| Minimum Chamfer Dimension (R1 Min) | — | 7.5 mm |
| Axial Displacement (S) | — | 19 mm |
| Minimum Rib Diameter Outer Ring (D1 Min) | — | 630 mm |
| Maximum Diameter Of Shaft Shoulder (Da Max) | — | 441 mm |
| Maximum Recess Radius (Ra1 Max) | — | 6 mm |
| Minimum Chamfer Dimension (Rmin) | — | 7.5 mm |
| Raceway Diameter Outer Ring (E) | — | 665 mm |
| Minimum Shaft Shoulder (Db Min) | — | 449 mm |
| Fatigue Load Limit, Radial (Cur) | — | 740,000 N |
| Temperature range | ||
| Operating temperature min.Tmin | — | -30 °C |
| Operating temperature min.Tmin | — | -22 °F |
| Operating temperature max.Tmax | — | 150 °C |
| Operating temperature max.Tmax | — | 302 °F |
Automatic matching is a search aid, not an interchangeability declaration. Confirm the full suffix, tolerances, internal design and application limits before substitution.