Cross-brand designation analysis
COMPARE / VERIFY
Same-model Comparison
Explore products that share a base designation across loaded brands, with dimensional agreement and data gaps shown clearly.
Cross Reference centre · Interchange verification checklist · Understand suffix differences
You entered NU2336EM. This table explores the base group NU2336; it does not preserve or approve every requested suffix. Search your complete marking first →
Automatic candidate selection
One base designation across loaded brands
Exact designations rank first. Dimensions, suffixes and other technical differences remain visible so the result is not mistaken for an interchangeability declaration.
Dimensions verified
“NU2336” across 5 loaded brands
At least two brands share the same bore, outside diameter and width. Use Custom Compare when you want to choose exact suffix variants yourself.
Technical comparison
Choose exact variants instead →Brand differences at a glance
| Parameter | SKFNU 2336 ECML180 × 380 × 126 mm | FAGNU2336-EX-TB-M1180 × 380 × 126 mm | TIMKENNU2336EMA180 × 380 × 126 mm | NSKNU2336EM180 × 380 × 126 mm | KOYONU2336180 × 380 × 126 mm |
|---|---|---|---|---|---|
| Comparable specifications | |||||
| Brand | SKF | FAG | TIMKEN | NSK | KOYO |
| Designation | NU 2336 ECML | NU2336-EX-TB-M1 | NU2336EMA | NU2336EM | NU2336 |
| Product family | Cylindrical roller bearings | — | Cylindrical 1-Row | Cylindrical roller bearing | Single-row / NU |
| Detailed type | Single row cylindrical roller bearing, nu design | Cylindrical roller bearings | Cylindrical roller bearings | Cylindrical roller bearings | Cylindrical roller bearings |
| Series | — | NU2336 | EX27767 | — | — |
| Bore diameterd | 180 mm | 180 mm | 180 mm | 180 mm | 180 mm |
| Outside diameterD | 380 mm | 380 mm | 380 mm | 380 mm | 380 mm |
| WidthB | 126 mm | 126 mm | 126 mm | 126 mm | 126 mm |
| Basic dynamic load ratingC | 1610 kN | 1680 kN | 1860 kN | 1920 kN | 1690 kN |
| Basic static load ratingC0 | 2240 kN | 2330 kN | 2250 kN | 2220 kN | 1940 kN |
| Fatigue load limitPu | 216 kN | 260 kN | — | — | 220 kN |
| Reference speednref | 1600 r/min | 1120 r/min | — | — | — |
| Limiting speednG | 3200 r/min | 2600 r/min | — | — | 1300 r/min |
| Mass≈m | 69.4 kg | 72.1 kg | 70.9 kg | — | 73 kg |
| Precision class | — | PN — Normal (ISO 492:2023) | — | — | — |
| Internal clearance | CN | CN (Group N) — Normal internal clearance | — | — | — |
| Sealing | Without | — | Open | — | — |
| Cage | Machined brass | M1 — Two Piece Brass Cage Roller Guided | Window Brass cage | Machined brass | — |
| Lubricant | None | — | — | — | — |
| Minimum operating temperatureTmin | — | -30 °C | — | — | — |
| Maximum operating temperatureTmax | — | 150 °C | — | — | — |
| Boundary dimensions | |||||
| Bearing widthB | — | — | — | 126 mm | — |
| Minimum bearing chamferr min. | — | — | — | 4 mm | — |
| Minimum secondary bearing chamferr1 min. | — | — | — | 4 mm | — |
| Roller inscribed circle diameterFw | — | — | — | 227 mm | — |
| Calculation Factors | |||||
| K Factor | — | — | 0.00 | — | — |
| Y1 Factor | — | — | 0.00 | — | — |
| Y2 Factor | — | — | 0.00 | — | — |
| Y0 Factor | — | — | 0.00 | — | — |
| E Factor | — | — | 0.00 | — | — |
| Cg Factor | — | — | 0.1526 | — | — |
| Capabilities & suitability | |||||
| Radial load capacity | — | Yes | — | — | — |
| Suitable for grease lubrication | — | Yes | — | — | — |
| Suitable for oil lubrication | — | Yes | — | — | — |
| Unsealed design | — | Yes | — | — | — |
| Largebearing | — | Yes | — | — | — |
| Catalogue reference mass | |||||
| Approximate shared-row mass — not separately stated for each rib arrangement | — | — | — | 74.6 kg | — |
| Classification | |||||
| Official Category Path | — | — | — | — | Cylindrical roller bearings - Single-row - NU |
| Official Classification 1 | — | — | — | — | Cylindrical roller bearings / Single-row / NU |
| Construction | |||||
| Single-row construction type | — | — | — | NU | — |
| Rib arrangement | — | — | — | Two outer-ring ribs; ribless inner ring | — |
| Standard cage material | — | — | — | Machined brass | — |
| Standard cage marking | — | — | — | M | — |
| Other cage codes listed for this catalogue row | — | — | — | None listed in this row | — |
| Precision — designation omission rule | — | — | — | ISO Normal when no precision suffix is specified | — |
| Clearance identification — verify interchangeability | — | — | — | No clearance suffix shown. CN omission applies to interchangeable designs; do not infer a numerical clearance. | — |
| Optimized crowning note | — | — | — | No optimized-crowning asterisk on this row | — |
| Dimensions | |||||
| Minimum chamfer dimensionrmin | — | 4 mm | — | — | — |
| Minimum chamfer dimensionrmin | — | 0.157 in | — | — | — |
| Minimum chamfer dimensionr1 min | — | 4 mm | — | — | — |
| Minimum chamfer dimensionr1 min | — | 0.157 in | — | — | — |
| Axial displacements | — | 10.5 mm | — | — | — |
| Axial displacements | — | 0.413 in | — | — | — |
| Raceway diameter outer ringE | — | 339 mm | — | — | — |
| Raceway diameter outer ringE | — | 13.346 in | — | — | — |
| Raceway diameter inner ringF | — | 227 mm | — | — | — |
| Raceway diameter inner ringF | — | 8.937 in | — | — | — |
| Minimum rib diameter outer ringD1 min | — | 316.6 mm | — | — | — |
| Minimum rib diameter outer ringD1 min | — | 12.465 in | — | — | — |
| Engineering — Abutment dimensions | |||||
| Diameter of spacer sleeved a | max. 222 mm | — | — | — | — |
| Diameter of shaft abutmentd b | min. 230 mm | — | — | — | — |
| Diameter of housing abutmentD a | max. 361.3 mm | — | — | — | — |
| Radius of filletr a | max. 3 mm | — | — | — | — |
| Radius of filletr b | max. 3 mm | — | — | — | — |
| Engineering — Calculation data | |||||
| Minimum load factork r | 0.38 | — | — | — | — |
| Limiting valuee | 0.3 | — | — | — | — |
| Calculation factorY | 0.4 | — | — | — | — |
| Engineering — Dimensions | |||||
| Shoulder diameter of outer ringD 1 | ≈ 321.4 mm | — | — | — | — |
| Raceway diameter of inner ringF | 227 mm | — | — | — | — |
| Chamfer dimensionr 1,2 | min. 4 mm | — | — | — | — |
| Chamfer dimensionr 3,4 | min. 4 mm | — | — | — | — |
| Permissible axial displacements | max. 10.5 mm | — | — | — | — |
| Load ratings — standard cage | |||||
| Basic dynamic radial load ratingCr | — | — | — | 1920000 N | — |
| Basic static radial load ratingC0r | — | — | — | 2220000 N | — |
| Logistics | |||||
| Product net weight | 69.4 kg | — | — | — | — |
| eClass code | 23-05-09-01 | — | — | — | — |
| UNSPSC code | 31171505 | — | — | — | — |
| Lubrication-qualified speed — standard cage | |||||
| Thermal speed rating — oil bath | — | — | — | 1500 r/min | — |
| Mechanical limiting speed — forced oil circulation | — | — | — | 2000 r/min | — |
| Limiting speed — grease | — | — | — | 1300 r/min | — |
| Limiting speed — oil bath | — | — | — | 1700 r/min | — |
| Main Dimensions & Performance Data | |||||
| Basic dynamic load rating, radialCr | — | 1,680,000 N | — | — | — |
| Basic dynamic load rating, radialCr | — | 377,697.842 lbf | — | — | — |
| Basic static load rating, radialC0r | — | 2,330,000 N | — | — | — |
| Basic static load rating, radialC0r | — | 523,830.935 lbf | — | — | — |
| Fatigue load limit, radialCur | — | 260,000 N | — | — | — |
| Fatigue load limit, radialCur | — | 58,453.237 lbf | — | — | — |
| Manufacturer Identity | |||||
| Schaeffler Product Code | — | 370669 | — | — | — |
| Material Number | — | — | 000000000190020490 | — | — |
| Official Class Key | — | — | — | — | 040-010-000 |
| Base Type | — | NU2336 | — | — | — |
| World Assembly Part Number | — | — | NU2336EMA | — | — |
| Gpsd Group | — | F01 | — | — | — |
| Inner Ring Part Number | — | — | 180ARUE23 | — | — |
| Product Line Id | — | 75 | — | — | — |
| Outer Ring Part Number | — | — | 180ERUE23 | — | — |
| Drawing Number | — | — | M104270 | — | — |
| Upc | — | — | 0087796303232 | — | — |
| Official Source System | — | — | CORE BP - DS DF | — | — |
| Official Last Run | — | — | 2026-08-23T20:02:48.583 | — | — |
| SAP material number | — | 0813535960000 | — | — | — |
| Base product | — | 2305090102 | — | — | — |
| Bearing X designation | — | NU2336-EX-TB-M1 | — | — | — |
| Mounting Manager ID | — | NU2336-EX-TB-M1 | — | — | — |
| Grease application ID | — | NU2336-EX-TB-M1 | — | — | — |
| Mounting dimensions | |||||
| Minimum diameter shaft shoulderda min | — | 197 mm | — | — | — |
| Minimum diameter shaft shoulderda min | — | 7.756 in | — | — | — |
| Maximum diameter of shaft shoulderda max | — | 225 mm | — | — | — |
| Maximum diameter of shaft shoulderda max | — | 8.858 in | — | — | — |
| Minimum shaft shoulderdb min | — | 229 mm | — | — | — |
| Minimum shaft shoulderdb min | — | 9.016 in | — | — | — |
| Maximum diameter of housing shoulderDa max | — | 363 mm | — | — | — |
| Maximum diameter of housing shoulderDa max | — | 14.291 in | — | — | — |
| Maximum recess radiusra max | — | 3 mm | — | — | — |
| Maximum recess radiusra max | — | 0.118 in | — | — | — |
| Maximum recess radiusra1 max | — | 3 mm | — | — | — |
| Maximum recess radiusra1 max | — | 0.118 in | — | — | — |
| Mounting dimensions — shown arrangement | |||||
| Minimum shaft shoulder diameterdb min. | — | — | — | 196 mm | — |
| Maximum housing shoulder diameterDa max. | — | — | — | 364 mm | — |
| Maximum adjusting-ring diameter (NU/NJ arrangement)db max. | — | — | — | 222 mm | — |
| Maximum adjacent fillet radiusra max. | — | — | — | 3 mm | — |
| Maximum secondary adjacent fillet radiusrb max. | — | — | — | 3 mm | — |
| Product characteristics | |||||
| DesignEX | — | Increased Capacity Design Design Modified | — | — | — |
| Radial internal clearanceCN (Group N) | — | Normal internal clearance | — | — | — |
| Tolerance classPN | — | Normal (ISO 492:2023) | — | — | — |
| Number of rows1 | — | Single-row design | — | — | — |
| Product identity | |||||
| Official product category | Cylindrical roller bearings | — | — | — | — |
| Official taxonomy path | /products/rolling-bearings/roller-bearings/cylindrical-roller-bearings/single-row-cylindrical-roller-bearings | — | — | — | — |
| Structure group ID | BC1_001_101 | — | — | — | — |
| Available from SKF | Yes | — | — | — | — |
| Remanufacturable | Yes | — | — | — | — |
| Product Identity | |||||
| Construction | — | Cylindrical roller bearing NU2..-M1, with cage, single row, non-locating bearing, 2 ribs on outer ring, 0 ribs on inner ring (smooth), type NU, Running accuracy in P6 | Single Row Cylindrical Roller Bearing | Imperial Series | 7.0866 in Bore | 14.9606 in OD | 4.9606 in Width | Open | Cylindrical Bore | Machined Window Brass Cage | C0 Clearance | — | — |
| Short Description | — | Cylindrical roller bearing | — | — | — |
| Type Description | — | — | Cylindrical 1-Row | — | — |
| Number Of Rows | 1 | — | 1 | — | — |
| Tapered Bore | — | — | N | — | — |
| Properties | |||||
| Bearing part | Complete bearing | — | — | — | — |
| Axial displacement capability | In both directions | — | — | — | — |
| Locating feature, bearing outer ring | Without | — | — | — | — |
| Bore type | Cylindrical | — | — | — | — |
| Number of flanges, outer ring | 2 | — | — | — | — |
| Number of flanges, inner ring | 0 | — | — | — | — |
| Loose flange | None | — | — | — | — |
| Radial internal clearance | CN | — | — | — | — |
| Tolerance class | Normal | — | — | — | — |
| Coating | Without | — | — | — | — |
| Relubrication feature | Without | — | — | — | — |
| Candidate for remanufacturing | Yes | — | — | — | — |
| Indicative carbon footprint for new product | 257.0 kg CO 2 e | — | — | — | — |
| Indicative carbon footprint for remanufactured product | 85.4 kg CO 2 e | — | — | — | — |
| Technical Data | |||||
| d | — | — | — | — | 380 mm |
| B | — | — | — | — | 126 mm |
| Bore Diameter (D) | — | 180 mm | — | — | — |
| R(Min.) | — | — | — | — | 4 mm |
| Outside Diamater (D) | — | 380 mm | — | — | — |
| R1(Min.) | — | — | — | — | 4 mm |
| Total Width (B) | — | 126 mm | — | — | — |
| Overall Width | — | — | 0.000 mm | — | — |
| Fw | — | — | — | — | 232 mm |
| Basic Dynamic Load Rating, Radial (Cr) | — | 1,680,000 N | — | — | — |
| Radial Rating | — | — | 1,860,000 N | — | — |
| Ew | — | — | — | — | - mm |
| Basic Static Load Rating, Radial (C0R) | — | 2,330,000 N | — | — | — |
| Axial Rating | — | — | 0 N | — | — |
| Basic Load Ratings : Cr | — | — | — | — | 1690 kN |
| Raceway Diameter Inner Ring (F) | — | 227 mm | — | — | — |
| Dynamic Rating C1 | — | — | 1,860,000 N | — | — |
| Basic Load Ratings : C0R | — | — | — | — | 1940 kN |
| Operating Temperature Min. (Tmin) | — | -30 °C | — | — | — |
| Dynamic Rating C90 | — | — | 0 N | — | — |
| Fatigue Load Limit : Cu | — | — | — | — | 220 kN |
| Minimum Diameter Shaft Shoulder (Da) | — | 197 mm | — | — | — |
| Dynamic Axial Rating Ca90 | — | — | 0 N | — | — |
| Limiting Speeds(Grease Lub.) | — | — | — | — | 1300 min-1 |
| Operating Temperature Max. (Tmax) | — | 150 °C | — | — | — |
| Dynamic Axial Rating Ca1 | — | — | 0 N | — | — |
| Limiting Speeds(Oil Lub.) | — | — | — | — | 1900 min-1 |
| Limiting Speed (Limiting Spe) | — | 2,600 1/min | — | — | — |
| Static Radial Rating C0 | — | — | 2,250,000 N | — | — |
| Sd1 | — | — | — | — | - mm |
| Reference Speed (Nϑr) | — | 1,120 1/min | — | — | — |
| Extended Dynamic Rating Ce | — | — | 0 N | — | — |
| B1 | — | — | — | — | - mm |
| Maximum Recess Radius (Ra Max) | — | 3 mm | — | — | — |
| Static Axial Rating C0A | — | — | 0 N | — | — |
| B2 | — | — | — | — | - mm |
| Maximum Diameter Of Housing Shoulder (Da) | — | 363 mm | — | — | — |
| Da(Min.) | — | — | — | — | - mm |
| Minimum Chamfer Dimension (R1 Min) | — | 4 mm | — | — | — |
| Db(Min.) | — | — | — | — | - mm |
| Axial Displacement (S) | — | 10.5 mm | — | — | — |
| Db(Max.) | — | — | — | — | - mm |
| Minimum Rib Diameter Outer Ring (D1 Min) | — | 316.6 mm | — | — | — |
| Dc(Min.) | — | — | — | — | - mm |
| Maximum Diameter Of Shaft Shoulder (Da Max) | — | 225 mm | — | — | — |
| Dd(Min.) | — | — | — | — | - mm |
| Maximum Recess Radius (Ra1 Max) | — | 3 mm | — | — | — |
| Da(Max.) | — | — | — | — | 364 mm |
| Minimum Chamfer Dimension (Rmin) | — | 4 mm | — | — | — |
| Raceway Diameter Outer Ring (E) | — | 339 mm | — | — | — |
| Minimum Shaft Shoulder (Db Min) | — | 229 mm | — | — | — |
| Ra(Max.) | — | — | — | — | 3 mm |
| Fatigue Load Limit, Radial (Cur) | — | 260,000 N | — | — | — |
| Rb(Max.) | — | — | — | — | 3 mm |
| Mass(Refer.) | — | — | — | — | 73.0 kg |
| Temperature range | |||||
| Operating temperature min.Tmin | — | -30 °C | — | — | — |
| Operating temperature min.Tmin | — | -22 °F | — | — | — |
| Operating temperature max.Tmax | — | 150 °C | — | — | — |
| Operating temperature max.Tmax | — | 302 °F | — | — | — |
Automatic matching is a search aid, not an interchangeability declaration. Confirm the full suffix, tolerances, internal design and application limits before substitution.