Cross-brand designation analysis
COMPARE / VERIFY
Same-model Comparison
Explore products that share a base designation across loaded brands, with dimensional agreement and data gaps shown clearly.
Cross Reference centre · Interchange verification checklist · Understand suffix differences
You entered NU232EMAC3. This table explores the base group NU232; it does not preserve or approve every requested suffix. Search your complete marking first →
Automatic candidate selection
One base designation across loaded brands
Exact designations rank first. Dimensions, suffixes and other technical differences remain visible so the result is not mistaken for an interchangeability declaration.
Dimensions verified
“NU232” across 5 loaded brands
At least two brands share the same bore, outside diameter and width. Use Custom Compare when you want to choose exact suffix variants yourself.
Technical comparison
Choose exact variants instead →Brand differences at a glance
| Parameter | SKFNU 232 ECM160 × 290 × 48 mm | FAGNU232-E-XL-M1160 × 290 × 48 mm | TIMKENNU232EMA160 × 290 × 48 mm | NSKNU232EM160 × 290 × 48 mm | KOYONU232R160 × 290 × 48 mm |
|---|---|---|---|---|---|
| Comparable specifications | |||||
| Brand | SKF | FAG | TIMKEN | NSK | KOYO |
| Designation | NU 232 ECM | NU232-E-XL-M1 | NU232EMA | NU232EM | NU232R |
| Product family | Cylindrical roller bearings | — | Cylindrical 1-Row | Cylindrical roller bearing | Single-row / NU |
| Detailed type | Single row cylindrical roller bearing, nu design | Cylindrical roller bearings | Cylindrical roller bearings | Cylindrical roller bearings | Cylindrical roller bearings |
| Series | — | NU232 | EX27124 | — | — |
| Bore diameterd | 160 mm | 160 mm | 160 mm | 160 mm | 160 mm |
| Outside diameterD | 290 mm | 290 mm | 290 mm | 290 mm | 290 mm |
| WidthB | 48 mm | 48 mm | 48 mm | 48 mm | 48 mm |
| Basic dynamic load ratingC | 585 kN | 590 kN | 572 kN | 615 kN | 624 kN |
| Basic static load ratingC0 | 680 kN | 670 kN | 695 kN | 665 kN | 666 kN |
| Fatigue load limitPu | 72 kN | 80 kN | — | — | 83.3 kN |
| Reference speednref | 2400 r/min | 2160 r/min | — | — | — |
| Limiting speednG | 2600 r/min | 4200 r/min | — | — | 2000 r/min |
| Mass≈m | 14.2 kg | 14.26 kg | 14.5 kg | — | 14.8 kg |
| Precision class | — | PN — Normal (ISO 492:2023) | — | — | — |
| Internal clearance | CN | CN (Group N) — Normal internal clearance | — | — | — |
| Sealing | Without | — | Open | — | — |
| Cage | Machined brass | M1 — Two Piece Brass Cage Roller Guided | Window Brass cage | Machined brass | — |
| Lubricant | None | — | — | — | — |
| Minimum operating temperatureTmin | — | -30 °C | — | — | — |
| Maximum operating temperatureTmax | — | 150 °C | — | — | — |
| Boundary dimensions | |||||
| Bearing widthB | — | — | — | 48 mm | — |
| Minimum bearing chamferr min. | — | — | — | 3 mm | — |
| Minimum secondary bearing chamferr1 min. | — | — | — | 3 mm | — |
| Roller inscribed circle diameterFw | — | — | — | 195 mm | — |
| Calculation Factors | |||||
| K Factor | — | — | 0.00 | — | — |
| Y1 Factor | — | — | 0.00 | — | — |
| Y2 Factor | — | — | 0.00 | — | — |
| Y0 Factor | — | — | 0.00 | — | — |
| E Factor | — | — | 0.00 | — | — |
| Cg Factor | — | — | 0.1135 | — | — |
| Capabilities & suitability | |||||
| Radial load capacity | — | Yes | — | — | — |
| Suitable for grease lubrication | — | Yes | — | — | — |
| Suitable for oil lubrication | — | Yes | — | — | — |
| Unsealed design | — | Yes | — | — | — |
| Catalogue reference mass | |||||
| Approximate shared-row mass — not separately stated for each rib arrangement | — | — | — | 14.7 kg | — |
| Classification | |||||
| Official Category Path | — | — | — | — | Cylindrical roller bearings - Single-row - NU |
| Official Classification 1 | — | — | — | — | Cylindrical roller bearings / Single-row / NU |
| Construction | |||||
| Single-row construction type | — | — | — | NU | — |
| Rib arrangement | — | — | — | Two outer-ring ribs; ribless inner ring | — |
| Standard cage material | — | — | — | Machined brass | — |
| Standard cage marking | — | — | — | M | — |
| Other cage codes listed for this catalogue row | — | — | — | None listed in this row | — |
| Precision — designation omission rule | — | — | — | ISO Normal when no precision suffix is specified | — |
| Clearance identification — verify interchangeability | — | — | — | No clearance suffix shown. CN omission applies to interchangeable designs; do not infer a numerical clearance. | — |
| Optimized crowning note | — | — | — | Catalogue asterisk: optimized crowning may be available; not verified as fitted | — |
| Dimensions | |||||
| Minimum chamfer dimensionrmin | — | 3 mm | — | — | — |
| Minimum chamfer dimensionrmin | — | 0.118 in | — | — | — |
| Minimum chamfer dimensionr1 min | — | 3 mm | — | — | — |
| Minimum chamfer dimensionr1 min | — | 0.118 in | — | — | — |
| Axial displacements | — | 4.1 mm | — | — | — |
| Axial displacements | — | 0.161 in | — | — | — |
| Raceway diameter outer ringE | — | 259 mm | — | — | — |
| Raceway diameter outer ringE | — | 10.197 in | — | — | — |
| Raceway diameter inner ringF | — | 195 mm | — | — | — |
| Raceway diameter inner ringF | — | 7.677 in | — | — | — |
| Minimum rib diameter outer ringD1 min | — | 249.6 mm | — | — | — |
| Minimum rib diameter outer ringD1 min | — | 9.827 in | — | — | — |
| Engineering — Abutment dimensions | |||||
| Diameter of spacer sleeved a | max. 191 mm | — | — | — | — |
| Diameter of shaft abutmentd b | min. 198 mm | — | — | — | — |
| Diameter of housing abutmentD a | max. 274.2 mm | — | — | — | — |
| Radius of filletr a | max. 2.5 mm | — | — | — | — |
| Radius of filletr b | max. 2.5 mm | — | — | — | — |
| Engineering — Associated products | |||||
| Angle ring | HJ 232 EC | — | — | — | — |
| Engineering — Calculation data | |||||
| SKF performance class | SKF Explorer | — | — | — | — |
| Minimum load factork r | 0.15 | — | — | — | — |
| Limiting valuee | 0.2 | — | — | — | — |
| Calculation factorY | 0.6 | — | — | — | — |
| Engineering — Dimensions | |||||
| Shoulder diameter of outer ringD 1 | ≈ 248.8 mm | — | — | — | — |
| Raceway diameter of inner ringF | 195 mm | — | — | — | — |
| Chamfer dimensionr 1,2 | min. 3 mm | — | — | — | — |
| Chamfer dimensionr 3,4 | min. 3 mm | — | — | — | — |
| Permissible axial displacements | max. 2.7 mm | — | — | — | — |
| Load ratings — standard cage | |||||
| Basic dynamic radial load ratingCr | — | — | — | 615000 N | — |
| Basic static radial load ratingC0r | — | — | — | 665000 N | — |
| Logistics | |||||
| Product net weight | 14.2 kg | — | — | — | — |
| eClass code | 23-05-09-01 | — | — | — | — |
| UNSPSC code | 31171505 | — | — | — | — |
| Lubrication-qualified speed — standard cage | |||||
| Thermal speed rating — oil bath | — | — | — | 2600 r/min | — |
| Mechanical limiting speed — forced oil circulation | — | — | — | 4000 r/min | — |
| Limiting speed — grease | — | — | — | 2200 r/min | — |
| Limiting speed — oil bath | — | — | — | 2600 r/min | — |
| Main Dimensions & Performance Data | |||||
| Basic dynamic load rating, radialCr | — | 590,000 N | — | — | — |
| Basic dynamic load rating, radialCr | — | 132,643.885 lbf | — | — | — |
| Basic static load rating, radialC0r | — | 670,000 N | — | — | — |
| Basic static load rating, radialC0r | — | 150,629.496 lbf | — | — | — |
| Fatigue load limit, radialCur | — | 80,000 N | — | — | — |
| Fatigue load limit, radialCur | — | 17,985.612 lbf | — | — | — |
| Manufacturer Identity | |||||
| Schaeffler Product Code | — | 368198 | — | — | — |
| Material Number | — | — | 000000000190005188 | — | — |
| Official Class Key | — | — | — | — | 040-010-000 |
| Base Type | — | NU232 | — | — | — |
| World Assembly Part Number | — | — | NU232EMA | — | — |
| Old Designation | — | ["NU232E.M1","NU232-E-M1"] | — | — | — |
| Inner Ring Part Number | — | — | 160ARUE02 | — | — |
| Gpsd Group | — | F01 | — | — | — |
| Outer Ring Part Number | — | — | 160ERUE02 | — | — |
| Product Line Id | — | 63 | — | — | — |
| Drawing Number | — | — | M98283 | — | — |
| X Life Marking | — | XL | — | — | — |
| Upc | — | — | 0053893773490 | — | — |
| Official Source System | — | — | CORE BP - DS DF | — | — |
| Official Last Run | — | — | 2026-08-23T20:02:48.513 | — | — |
| SAP material number | — | 0167394260000 | — | — | — |
| Base product | — | 2305090102 | — | — | — |
| Bearing X designation | — | NU232-E-XL-M1 | — | — | — |
| Mounting Manager ID | — | NU232-E-XL-M1 | — | — | — |
| Grease application ID | — | NU232-E-XL-M1 | — | — | — |
| Mounting dimensions | |||||
| Minimum diameter shaft shoulderda min | — | 174 mm | — | — | — |
| Minimum diameter shaft shoulderda min | — | 6.85 in | — | — | — |
| Maximum diameter of shaft shoulderda max | — | 192 mm | — | — | — |
| Maximum diameter of shaft shoulderda max | — | 7.559 in | — | — | — |
| Minimum shaft shoulderdb min | — | 197 mm | — | — | — |
| Minimum shaft shoulderdb min | — | 7.756 in | — | — | — |
| Maximum diameter of housing shoulderDa max | — | 276 mm | — | — | — |
| Maximum diameter of housing shoulderDa max | — | 10.866 in | — | — | — |
| Maximum recess radiusra max | — | 2.5 mm | — | — | — |
| Maximum recess radiusra max | — | 0.098 in | — | — | — |
| Maximum recess radiusra1 max | — | 2.5 mm | — | — | — |
| Maximum recess radiusra1 max | — | 0.098 in | — | — | — |
| Mounting dimensions — shown arrangement | |||||
| Minimum shaft shoulder diameterdb min. | — | — | — | 173 mm | — |
| Maximum housing shoulder diameterDa max. | — | — | — | 277 mm | — |
| Maximum adjusting-ring diameter (NU/NJ arrangement)db max. | — | — | — | 190 mm | — |
| Maximum adjacent fillet radiusra max. | — | — | — | 2.5 mm | — |
| Maximum secondary adjacent fillet radiusrb max. | — | — | — | 2.5 mm | — |
| Product characteristics | |||||
| DesignE | — | Increased Capacity Design | — | — | — |
| Radial internal clearanceCN (Group N) | — | Normal internal clearance | — | — | — |
| Tolerance classPN | — | Normal (ISO 492:2023) | — | — | — |
| Number of rows1 | — | Single-row design | — | — | — |
| Product identity | |||||
| Official product category | Cylindrical roller bearings | — | — | — | — |
| Official taxonomy path | /products/rolling-bearings/roller-bearings/cylindrical-roller-bearings/single-row-cylindrical-roller-bearings | — | — | — | — |
| Structure group ID | BC1_001_101 | — | — | — | — |
| Available from SKF | Yes | — | — | — | — |
| Remanufacturable | No | — | — | — | — |
| Product Identity | |||||
| Construction | — | Cylindrical roller bearing NU..-E-XL-M1, with cage, single row, non-locating bearing, 2 ribs on outer ring, 0 ribs on inner ring (smooth), type NU, Running accuracy in P6 | Single Row Cylindrical Roller Bearing | Imperial Series | 6.2992 in Bore | 11.4173 in OD | 1.8898 in Width | Open | Cylindrical Bore | Machined Window Brass Cage | C0 Clearance | — | — |
| Type Description | — | — | Cylindrical 1-Row | — | — |
| Short Description | — | Cylindrical roller bearing | — | — | — |
| Number Of Rows | 1 | — | 1 | — | — |
| Tapered Bore | — | — | N | — | — |
| Properties | |||||
| Bearing part | Complete bearing | — | — | — | — |
| Axial displacement capability | In both directions | — | — | — | — |
| Locating feature, bearing outer ring | Without | — | — | — | — |
| Bore type | Cylindrical | — | — | — | — |
| Number of flanges, outer ring | 2 | — | — | — | — |
| Number of flanges, inner ring | 0 | — | — | — | — |
| Loose flange | None | — | — | — | — |
| Radial internal clearance | CN | — | — | — | — |
| Tolerance class | Normal | — | — | — | — |
| Coating | Without | — | — | — | — |
| Relubrication feature | Without | — | — | — | — |
| Indicative carbon footprint for new product | 52.5 kg CO 2 e | — | — | — | — |
| Technical Data | |||||
| d | — | — | — | — | 290 mm |
| B | — | — | — | — | 48 mm |
| R(Min.) | — | — | — | — | 3 mm |
| R1(Min.) | — | — | — | — | 3 mm |
| Bore Diameter (D) | — | 160 mm | — | — | — |
| Overall Width | — | — | 0.000 mm | — | — |
| Fw | — | — | — | — | 195 mm |
| Outside Diamater (D) | — | 290 mm | — | — | — |
| Radial Rating | — | — | 572,000 N | — | — |
| Ew | — | — | — | — | - mm |
| Total Width (B) | — | 48 mm | — | — | — |
| Axial Rating | — | — | 0 N | — | — |
| Basic Load Ratings : Cr | — | — | — | — | 624 kN |
| Basic Dynamic Load Rating, Radial (Cr) | — | 590,000 N | — | — | — |
| Dynamic Rating C1 | — | — | 572,000 N | — | — |
| Basic Load Ratings : C0R | — | — | — | — | 666 kN |
| Basic Static Load Rating, Radial (C0R) | — | 670,000 N | — | — | — |
| Dynamic Rating C90 | — | — | 0 N | — | — |
| Fatigue Load Limit : Cu | — | — | — | — | 83.3 kN |
| Raceway Diameter Inner Ring (F) | — | 195 mm | — | — | — |
| Dynamic Axial Rating Ca90 | — | — | 0 N | — | — |
| Limiting Speeds(Grease Lub.) | — | — | — | — | 2000 min-1 |
| Operating Temperature Min. (Tmin) | — | -30 °C | — | — | — |
| Dynamic Axial Rating Ca1 | — | — | 0 N | — | — |
| Limiting Speeds(Oil Lub.) | — | — | — | — | 2400 min-1 |
| Minimum Diameter Shaft Shoulder (Da) | — | 174 mm | — | — | — |
| Static Radial Rating C0 | — | — | 695,000 N | — | — |
| Sd1 | — | — | — | — | - mm |
| Operating Temperature Max. (Tmax) | — | 150 °C | — | — | — |
| Extended Dynamic Rating Ce | — | — | 0 N | — | — |
| B1 | — | — | — | — | - mm |
| Limiting Speed (Limiting Spe) | — | 4,200 1/min | — | — | — |
| Static Axial Rating C0A | — | — | 0 N | — | — |
| B2 | — | — | — | — | - mm |
| Reference Speed (Nϑr) | — | 2,160 1/min | — | — | — |
| Da(Min.) | — | — | — | — | - mm |
| Maximum Recess Radius (Ra Max) | — | 2.5 mm | — | — | — |
| Db(Min.) | — | — | — | — | - mm |
| Maximum Diameter Of Housing Shoulder (Da) | — | 276 mm | — | — | — |
| Db(Max.) | — | — | — | — | - mm |
| Minimum Chamfer Dimension (R1 Min) | — | 3 mm | — | — | — |
| Dc(Min.) | — | — | — | — | - mm |
| Axial Displacement (S) | — | 4.1 mm | — | — | — |
| Dd(Min.) | — | — | — | — | - mm |
| Minimum Rib Diameter Outer Ring (D1 Min) | — | 249.6 mm | — | — | — |
| Da(Max.) | — | — | — | — | 277 mm |
| Maximum Diameter Of Shaft Shoulder (Da Max) | — | 192 mm | — | — | — |
| Maximum Recess Radius (Ra1 Max) | — | 2.5 mm | — | — | — |
| Minimum Chamfer Dimension (Rmin) | — | 3 mm | — | — | — |
| Ra(Max.) | — | — | — | — | 2.5 mm |
| Raceway Diameter Outer Ring (E) | — | 259 mm | — | — | — |
| Rb(Max.) | — | — | — | — | 2.5 mm |
| Minimum Shaft Shoulder (Db Min) | — | 197 mm | — | — | — |
| Mass(Refer.) | — | — | — | — | 14.8 kg |
| Fatigue Load Limit, Radial (Cur) | — | 80,000 N | — | — | — |
| Temperature range | |||||
| Operating temperature min.Tmin | — | -30 °C | — | — | — |
| Operating temperature min.Tmin | — | -22 °F | — | — | — |
| Operating temperature max.Tmax | — | 150 °C | — | — | — |
| Operating temperature max.Tmax | — | 302 °F | — | — | — |
Automatic matching is a search aid, not an interchangeability declaration. Confirm the full suffix, tolerances, internal design and application limits before substitution.