Cross-brand designation analysis
COMPARE / VERIFY
Same-model Comparison
Explore products that share a base designation across loaded brands, with dimensional agreement and data gaps shown clearly.
Automatic candidate selection
One base designation across loaded brands
Exact designations rank first. Dimensions, suffixes and other technical differences remain visible so the result is not mistaken for an interchangeability declaration.
Dimensions verified
“NU2328” across 5 loaded brands
At least two brands share the same bore, outside diameter and width. Use Custom Compare when you want to choose exact suffix variants yourself.
Technical comparison
Choose exact variants instead →Brand differences at a glance
| Parameter | SKFNU 2328 ECML140 × 300 × 102 mm | FAGNU2328-E-XL-M1140 × 300 × 102 mm | TIMKENNU2328EMA140 × 300 × 102 mm | NSKNU2328EM140 × 300 × 102 mm | KOYONU2328140 × 300 × 102 mm |
|---|---|---|---|---|---|
| Comparable specifications | |||||
| Brand | SKF | FAG | TIMKEN | NSK | KOYO |
| Designation | NU 2328 ECML | NU2328-E-XL-M1 | NU2328EMA | NU2328EM | NU2328 |
| Product family | Cylindrical roller bearings | — | Cylindrical 1-Row | Cylindrical roller bearing | Single-row / NU |
| Detailed type | Single row cylindrical roller bearing, nu design | Cylindrical roller bearings | Cylindrical roller bearings | Cylindrical roller bearings | Cylindrical roller bearings |
| Series | — | NU2328 | EX27547 | — | — |
| Bore diameterd | 140 mm | 140 mm | 140 mm | 140 mm | 140 mm |
| Outside diameterD | 300 mm | 300 mm | 300 mm | 300 mm | 300 mm |
| WidthB | 102 mm | 102 mm | 102 mm | 102 mm | 102 mm |
| Basic dynamic load ratingC | 1200 kN | 1210 kN | 1180 kN | 1250 kN | 1150 kN |
| Basic static load ratingC0 | 1430 kN | 1390 kN | 1420 kN | 1380 kN | 1250 kN |
| Fatigue load limitPu | 150 kN | 222 kN | — | — | 150 kN |
| Reference speednref | 2400 r/min | 1620 r/min | — | — | — |
| Limiting speednG | 4300 r/min | 3950 r/min | — | — | 1700 r/min |
| Mass≈m | 35.9 kg | 35.32 kg | 36.1 kg | — | 36.8 kg |
| Precision class | — | PN — Normal (ISO 492:2023) | — | — | — |
| Internal clearance | CN | CN (Group N) — Normal internal clearance | — | — | — |
| Sealing | Without | — | Open | — | — |
| Cage | Machined brass | M1 — Two Piece Brass Cage Roller Guided | Window Brass cage | Machined brass | — |
| Lubricant | None | — | — | — | — |
| Minimum operating temperatureTmin | — | -30 °C | — | — | — |
| Maximum operating temperatureTmax | — | 150 °C | — | — | — |
| Boundary dimensions | |||||
| Bearing widthB | — | — | — | 102 mm | — |
| Minimum bearing chamferr min. | — | — | — | 4 mm | — |
| Minimum secondary bearing chamferr1 min. | — | — | — | 4 mm | — |
| Roller inscribed circle diameterFw | — | — | — | 180 mm | — |
| Calculation Factors | |||||
| K Factor | — | — | 0.00 | — | — |
| Y1 Factor | — | — | 0.00 | — | — |
| Y2 Factor | — | — | 0.00 | — | — |
| Y0 Factor | — | — | 0.00 | — | — |
| E Factor | — | — | 0.00 | — | — |
| Cg Factor | — | — | 0.1277 | — | — |
| Capabilities & suitability | |||||
| Radial load capacity | — | Yes | — | — | — |
| Suitable for grease lubrication | — | Yes | — | — | — |
| Suitable for oil lubrication | — | Yes | — | — | — |
| Unsealed design | — | Yes | — | — | — |
| Catalogue reference mass | |||||
| Approximate shared-row mass — not separately stated for each rib arrangement | — | — | — | 37.7 kg | — |
| Classification | |||||
| Official Category Path | — | — | — | — | Cylindrical roller bearings - Single-row - NU |
| Official Classification 1 | — | — | — | — | Cylindrical roller bearings / Single-row / NU |
| Construction | |||||
| Single-row construction type | — | — | — | NU | — |
| Rib arrangement | — | — | — | Two outer-ring ribs; ribless inner ring | — |
| Standard cage material | — | — | — | Machined brass | — |
| Standard cage marking | — | — | — | M | — |
| Other cage codes listed for this catalogue row | — | — | — | None listed in this row | — |
| Precision — designation omission rule | — | — | — | ISO Normal when no precision suffix is specified | — |
| Clearance identification — verify interchangeability | — | — | — | No clearance suffix shown. CN omission applies to interchangeable designs; do not infer a numerical clearance. | — |
| Optimized crowning note | — | — | — | Catalogue asterisk: optimized crowning may be available; not verified as fitted | — |
| Dimensions | |||||
| Minimum chamfer dimensionrmin | — | 4 mm | — | — | — |
| Minimum chamfer dimensionrmin | — | 0.157 in | — | — | — |
| Minimum chamfer dimensionr1 min | — | 4 mm | — | — | — |
| Minimum chamfer dimensionr1 min | — | 0.157 in | — | — | — |
| Axial displacements | — | 9.2 mm | — | — | — |
| Axial displacements | — | 0.362 in | — | — | — |
| Raceway diameter outer ringE | — | 264 mm | — | — | — |
| Raceway diameter outer ringE | — | 10.394 in | — | — | — |
| Raceway diameter inner ringF | — | 180 mm | — | — | — |
| Raceway diameter inner ringF | — | 7.087 in | — | — | — |
| Minimum rib diameter outer ringD1 min | — | 251.7 mm | — | — | — |
| Minimum rib diameter outer ringD1 min | — | 9.909 in | — | — | — |
| Engineering — Abutment dimensions | |||||
| Diameter of spacer sleeved a | max. 175 mm | — | — | — | — |
| Diameter of shaft abutmentd b | min. 183 mm | — | — | — | — |
| Diameter of housing abutmentD a | max. 282.5 mm | — | — | — | — |
| Radius of filletr a | max. 3 mm | — | — | — | — |
| Radius of filletr b | max. 3 mm | — | — | — | — |
| Engineering — Associated products | |||||
| Angle ring | HJ 2328 EC | — | — | — | — |
| Engineering — Calculation data | |||||
| SKF performance class | SKF Explorer | — | — | — | — |
| Minimum load factork r | 0.38 | — | — | — | — |
| Limiting valuee | 0.3 | — | — | — | — |
| Calculation factorY | 0.4 | — | — | — | — |
| Engineering — Dimensions | |||||
| Shoulder diameter of outer ringD 1 | ≈ 251.7 mm | — | — | — | — |
| Raceway diameter of inner ringF | 180 mm | — | — | — | — |
| Chamfer dimensionr 1,2 | min. 4 mm | — | — | — | — |
| Chamfer dimensionr 3,4 | min. 4 mm | — | — | — | — |
| Permissible axial displacements | max. 9.7 mm | — | — | — | — |
| Load ratings — standard cage | |||||
| Basic dynamic radial load ratingCr | — | — | — | 1250000 N | — |
| Basic static radial load ratingC0r | — | — | — | 1380000 N | — |
| Logistics | |||||
| Product net weight | 35.9 kg | — | — | — | — |
| eClass code | 23-05-09-01 | — | — | — | — |
| UNSPSC code | 31171505 | — | — | — | — |
| Lubrication-qualified speed — standard cage | |||||
| Thermal speed rating — oil bath | — | — | — | 2200 r/min | — |
| Mechanical limiting speed — forced oil circulation | — | — | — | 2600 r/min | — |
| Limiting speed — grease | — | — | — | 1700 r/min | — |
| Limiting speed — oil bath | — | — | — | 2200 r/min | — |
| Main Dimensions & Performance Data | |||||
| Basic dynamic load rating, radialCr | — | 1,210,000 N | — | — | — |
| Basic dynamic load rating, radialCr | — | 272,032.374 lbf | — | — | — |
| Basic static load rating, radialC0r | — | 1,390,000 N | — | — | — |
| Basic static load rating, radialC0r | — | 312,500 lbf | — | — | — |
| Fatigue load limit, radialCur | — | 222,000 N | — | — | — |
| Fatigue load limit, radialCur | — | 49,910.072 lbf | — | — | — |
| Manufacturer Identity | |||||
| Schaeffler Product Code | — | 368195 | — | — | — |
| Material Number | — | — | 000000000190009172 | — | — |
| Official Class Key | — | — | — | — | 040-010-000 |
| Base Type | — | NU2328 | — | — | — |
| World Assembly Part Number | — | — | NU2328EMA | — | — |
| Old Designation | — | ["NU2328E.M1","NU2328-E-M1"] | — | — | — |
| Inner Ring Part Number | — | — | 140ARUE23 | — | — |
| Gpsd Group | — | F01 | — | — | — |
| Outer Ring Part Number | — | — | 140ERUE23 | — | — |
| Product Line Id | — | 63 | — | — | — |
| Drawing Number | — | — | M99812 | — | — |
| X Life Marking | — | XL | — | — | — |
| Upc | — | — | 0053893752372 | — | — |
| Official Source System | — | — | CORE BP - DS DF | — | — |
| Official Last Run | — | — | 2026-08-23T20:02:47.757 | — | — |
| SAP material number | — | 0167394000000 | — | — | — |
| Base product | — | 2305090102 | — | — | — |
| Bearing X designation | — | NU2328-E-XL-M1 | — | — | — |
| Mounting Manager ID | — | NU2328-E-XL-M1 | — | — | — |
| Grease application ID | — | NU2328-E-XL-M1 | — | — | — |
| Mounting dimensions | |||||
| Minimum diameter shaft shoulderda min | — | 157 mm | — | — | — |
| Minimum diameter shaft shoulderda min | — | 6.181 in | — | — | — |
| Maximum diameter of shaft shoulderda max | — | 176 mm | — | — | — |
| Maximum diameter of shaft shoulderda max | — | 6.929 in | — | — | — |
| Minimum shaft shoulderdb min | — | 182 mm | — | — | — |
| Minimum shaft shoulderdb min | — | 7.165 in | — | — | — |
| Maximum diameter of housing shoulderDa max | — | 283 mm | — | — | — |
| Maximum diameter of housing shoulderDa max | — | 11.142 in | — | — | — |
| Maximum recess radiusra max | — | 3 mm | — | — | — |
| Maximum recess radiusra max | — | 0.118 in | — | — | — |
| Maximum recess radiusra1 max | — | 3 mm | — | — | — |
| Maximum recess radiusra1 max | — | 0.118 in | — | — | — |
| Mounting dimensions — shown arrangement | |||||
| Minimum shaft shoulder diameterdb min. | — | — | — | 156 mm | — |
| Maximum housing shoulder diameterDa max. | — | — | — | 284 mm | — |
| Maximum adjusting-ring diameter (NU/NJ arrangement)db max. | — | — | — | 176 mm | — |
| Maximum adjacent fillet radiusra max. | — | — | — | 3 mm | — |
| Maximum secondary adjacent fillet radiusrb max. | — | — | — | 3 mm | — |
| Product characteristics | |||||
| DesignE | — | Increased Capacity Design | — | — | — |
| Radial internal clearanceCN (Group N) | — | Normal internal clearance | — | — | — |
| Tolerance classPN | — | Normal (ISO 492:2023) | — | — | — |
| Number of rows1 | — | Single-row design | — | — | — |
| Product identity | |||||
| Official product category | Cylindrical roller bearings | — | — | — | — |
| Official taxonomy path | /products/rolling-bearings/roller-bearings/cylindrical-roller-bearings/single-row-cylindrical-roller-bearings | — | — | — | — |
| Structure group ID | BC1_001_101 | — | — | — | — |
| Available from SKF | Yes | — | — | — | — |
| Remanufacturable | No | — | — | — | — |
| Product Identity | |||||
| Construction | — | Cylindrical roller bearing NU..-E-XL-M1, with cage, single row, non-locating bearing, 2 ribs on outer ring, 0 ribs on inner ring (smooth), type NU, Running accuracy in P6 | Single Row Cylindrical Roller Bearing | Imperial Series | 5.5118 in Bore | 11.8110 in OD | 4.0157 in Width | Open | Cylindrical Bore | Machined Window Brass Cage | C0 Clearance | — | — |
| Type Description | — | — | Cylindrical 1-Row | — | — |
| Short Description | — | Cylindrical roller bearing | — | — | — |
| Number Of Rows | 1 | — | 1 | — | — |
| Tapered Bore | — | — | N | — | — |
| Properties | |||||
| Bearing part | Complete bearing | — | — | — | — |
| Axial displacement capability | In both directions | — | — | — | — |
| Locating feature, bearing outer ring | Without | — | — | — | — |
| Bore type | Cylindrical | — | — | — | — |
| Number of flanges, outer ring | 2 | — | — | — | — |
| Number of flanges, inner ring | 0 | — | — | — | — |
| Loose flange | None | — | — | — | — |
| Radial internal clearance | CN | — | — | — | — |
| Tolerance class | Normal | — | — | — | — |
| Coating | Without | — | — | — | — |
| Relubrication feature | Without | — | — | — | — |
| Indicative carbon footprint for new product | 133.0 kg CO 2 e | — | — | — | — |
| Technical Data | |||||
| d | — | — | — | — | 300 mm |
| B | — | — | — | — | 102 mm |
| R(Min.) | — | — | — | — | 4 mm |
| R1(Min.) | — | — | — | — | 4 mm |
| Bore Diameter (D) | — | 140 mm | — | — | — |
| Overall Width | — | — | 0.000 mm | — | — |
| Fw | — | — | — | — | 180 mm |
| Outside Diamater (D) | — | 300 mm | — | — | — |
| Radial Rating | — | — | 1,180,000 N | — | — |
| Ew | — | — | — | — | - mm |
| Total Width (B) | — | 102 mm | — | — | — |
| Axial Rating | — | — | 0 N | — | — |
| Basic Load Ratings : Cr | — | — | — | — | 1150 kN |
| Basic Dynamic Load Rating, Radial (Cr) | — | 1,210,000 N | — | — | — |
| Dynamic Rating C1 | — | — | 1,180,000 N | — | — |
| Basic Load Ratings : C0R | — | — | — | — | 1250 kN |
| Basic Static Load Rating, Radial (C0R) | — | 1,390,000 N | — | — | — |
| Dynamic Rating C90 | — | — | 0 N | — | — |
| Fatigue Load Limit : Cu | — | — | — | — | 150 kN |
| Raceway Diameter Inner Ring (F) | — | 180 mm | — | — | — |
| Dynamic Axial Rating Ca90 | — | — | 0 N | — | — |
| Limiting Speeds(Grease Lub.) | — | — | — | — | 1700 min-1 |
| Operating Temperature Min. (Tmin) | — | -30 °C | — | — | — |
| Dynamic Axial Rating Ca1 | — | — | 0 N | — | — |
| Limiting Speeds(Oil Lub.) | — | — | — | — | 2500 min-1 |
| Minimum Diameter Shaft Shoulder (Da) | — | 157 mm | — | — | — |
| Static Radial Rating C0 | — | — | 1,420,000 N | — | — |
| Sd1 | — | — | — | — | - mm |
| Operating Temperature Max. (Tmax) | — | 150 °C | — | — | — |
| Extended Dynamic Rating Ce | — | — | 0 N | — | — |
| B1 | — | — | — | — | - mm |
| Limiting Speed (Limiting Spe) | — | 3,950 1/min | — | — | — |
| Static Axial Rating C0A | — | — | 0 N | — | — |
| B2 | — | — | — | — | - mm |
| Reference Speed (Nϑr) | — | 1,620 1/min | — | — | — |
| Da(Min.) | — | — | — | — | - mm |
| Maximum Recess Radius (Ra Max) | — | 3 mm | — | — | — |
| Db(Min.) | — | — | — | — | - mm |
| Maximum Diameter Of Housing Shoulder (Da) | — | 283 mm | — | — | — |
| Db(Max.) | — | — | — | — | - mm |
| Minimum Chamfer Dimension (R1 Min) | — | 4 mm | — | — | — |
| Dc(Min.) | — | — | — | — | - mm |
| Axial Displacement (S) | — | 9.2 mm | — | — | — |
| Dd(Min.) | — | — | — | — | - mm |
| Minimum Rib Diameter Outer Ring (D1 Min) | — | 251.7 mm | — | — | — |
| Da(Max.) | — | — | — | — | 284 mm |
| Maximum Diameter Of Shaft Shoulder (Da Max) | — | 176 mm | — | — | — |
| Maximum Recess Radius (Ra1 Max) | — | 3 mm | — | — | — |
| Minimum Chamfer Dimension (Rmin) | — | 4 mm | — | — | — |
| Ra(Max.) | — | — | — | — | 3 mm |
| Raceway Diameter Outer Ring (E) | — | 264 mm | — | — | — |
| Rb(Max.) | — | — | — | — | 3 mm |
| Minimum Shaft Shoulder (Db Min) | — | 182 mm | — | — | — |
| Mass(Refer.) | — | — | — | — | 36.8 kg |
| Fatigue Load Limit, Radial (Cur) | — | 222,000 N | — | — | — |
| Temperature range | |||||
| Operating temperature min.Tmin | — | -30 °C | — | — | — |
| Operating temperature min.Tmin | — | -22 °F | — | — | — |
| Operating temperature max.Tmax | — | 150 °C | — | — | — |
| Operating temperature max.Tmax | — | 302 °F | — | — | — |
Automatic matching is a search aid, not an interchangeability declaration. Confirm the full suffix, tolerances, internal design and application limits before substitution.