Cross-brand designation analysis
COMPARE / VERIFY
Same-model Comparison
Explore products that share a base designation across loaded brands, with dimensional agreement and data gaps shown clearly.
Automatic candidate selection
One base designation across loaded brands
Exact designations rank first. Dimensions, suffixes and other technical differences remain visible so the result is not mistaken for an interchangeability declaration.
Dimensions verified
“NU2220” across 5 loaded brands
At least two brands share the same bore, outside diameter and width. Use Custom Compare when you want to choose exact suffix variants yourself.
Technical comparison
Choose exact variants instead →Brand differences at a glance
| Parameter | SKFNU 2220 ECJ100 × 180 × 46 mm | FAGNU2220-E-XL-M1100 × 180 × 46 mm | TIMKENNU2220EJ100 × 180 × 46 mm | NSKNU2220ET100 × 180 × 46 mm | KOYONU2220100 × 180 × 46 mm |
|---|---|---|---|---|---|
| Comparable specifications | |||||
| Brand | SKF | FAG | TIMKEN | NSK | KOYO |
| Designation | NU 2220 ECJ | NU2220-E-XL-M1 | NU2220EJ | NU2220ET | NU2220 |
| Product family | Cylindrical roller bearings | — | Cylindrical 1-Row | Cylindrical roller bearing | Single-row / NU |
| Detailed type | Single row cylindrical roller bearing, nu design | Cylindrical roller bearings | Cylindrical roller bearings | Cylindrical roller bearings | Cylindrical roller bearings |
| Series | — | NU2220 | EX27552 | — | — |
| Bore diameterd | 100 mm | 100 mm | 100 mm | 100 mm | 100 mm |
| Outside diameterD | 180 mm | 180 mm | 180 mm | 180 mm | 180 mm |
| WidthB | 46 mm | 46 mm | 46 mm | 46 mm | 46 mm |
| Basic dynamic load ratingC | 380 kN | 395 kN | 377 kN | 410 kN | 322 kN |
| Basic static load ratingC0 | 450 kN | 445 kN | 451 kN | 445 kN | 338 kN |
| Fatigue load limitPu | 54 kN | 78 kN | — | — | 47.3 kN |
| Reference speednref | 4000 r/min | 2900 r/min | — | — | — |
| Limiting speednG | 4500 r/min | 6800 r/min | — | — | 3100 r/min |
| Mass≈m | 4.81 kg | 5.2 kg | 4.7 kg | — | 4.67 kg |
| Precision class | — | PN — Normal (ISO 492:2023) | — | — | — |
| Internal clearance | CN | CN (Group N) — Normal internal clearance | — | — | — |
| Sealing | Without | — | Open | — | — |
| Cage | Sheet metal | M1 — Two Piece Brass Cage Roller Guided | Window Steel cage | Polyamide 66 | — |
| Lubricant | None | — | — | — | — |
| Minimum operating temperatureTmin | — | -30 °C | — | — | — |
| Maximum operating temperatureTmax | — | 150 °C | — | — | — |
| Boundary dimensions | |||||
| Bearing widthB | — | — | — | 46 mm | — |
| Minimum bearing chamferr min. | — | — | — | 2.1 mm | — |
| Minimum secondary bearing chamferr1 min. | — | — | — | 2.1 mm | — |
| Roller inscribed circle diameterFw | — | — | — | 119 mm | — |
| Calculation Factors | |||||
| K Factor | — | — | 0.00 | — | — |
| Y1 Factor | — | — | 0.00 | — | — |
| Y2 Factor | — | — | 0.00 | — | — |
| Y0 Factor | — | — | 0.00 | — | — |
| E Factor | — | — | 0.00 | — | — |
| Cg Factor | — | — | 0.1040 | — | — |
| Capabilities & suitability | |||||
| Radial load capacity | — | Yes | — | — | — |
| Suitable for grease lubrication | — | Yes | — | — | — |
| Suitable for oil lubrication | — | Yes | — | — | — |
| Unsealed design | — | Yes | — | — | — |
| Catalogue reference mass | |||||
| Approximate shared-row mass — not separately stated for each rib arrangement | — | — | — | 4.69 kg | — |
| Classification | |||||
| Official Category Path | — | — | — | — | Cylindrical roller bearings - Single-row - NU |
| Official Classification 1 | — | — | — | — | Cylindrical roller bearings / Single-row / NU |
| Construction | |||||
| Single-row construction type | — | — | — | NU | — |
| Rib arrangement | — | — | — | Two outer-ring ribs; ribless inner ring | — |
| Standard cage material | — | — | — | Polyamide 66 | — |
| Standard cage marking | — | — | — | T | — |
| Other cage codes listed for this catalogue row | — | — | — | M, T7 | — |
| Precision — designation omission rule | — | — | — | ISO Normal when no precision suffix is specified | — |
| Clearance identification — verify interchangeability | — | — | — | No clearance suffix shown. CN omission applies to interchangeable designs; do not infer a numerical clearance. | — |
| Optimized crowning note | — | — | — | Catalogue asterisk: optimized crowning may be available; not verified as fitted | — |
| Dimensions | |||||
| Minimum chamfer dimensionrmin | — | 2.1 mm | — | — | — |
| Minimum chamfer dimensionrmin | — | 0.083 in | — | — | — |
| Minimum chamfer dimensionr1 min | — | 2.1 mm | — | — | — |
| Minimum chamfer dimensionr1 min | — | 0.083 in | — | — | — |
| Axial displacements | — | 2.5 mm | — | — | — |
| Axial displacements | — | 0.098 in | — | — | — |
| Raceway diameter outer ringE | — | 163 mm | — | — | — |
| Raceway diameter outer ringE | — | 6.417 in | — | — | — |
| Raceway diameter inner ringF | — | 119 mm | — | — | — |
| Raceway diameter inner ringF | — | 4.685 in | — | — | — |
| Minimum rib diameter outer ringD1 min | — | 156.9 mm | — | — | — |
| Minimum rib diameter outer ringD1 min | — | 6.177 in | — | — | — |
| Engineering — Abutment dimensions | |||||
| Diameter of spacer sleeved a | max. 116 mm | — | — | — | — |
| Diameter of shaft abutmentd b | min. 122 mm | — | — | — | — |
| Diameter of housing abutmentD a | max. 167.5 mm | — | — | — | — |
| Radius of filletr a | max. 2 mm | — | — | — | — |
| Radius of filletr b | max. 2 mm | — | — | — | — |
| Engineering — Associated products | |||||
| Angle ring | HJ 2220 EC | — | — | — | — |
| Engineering — Calculation data | |||||
| SKF performance class | SKF Explorer | — | — | — | — |
| Minimum load factork r | 0.2 | — | — | — | — |
| Limiting valuee | 0.3 | — | — | — | — |
| Calculation factorY | 0.4 | — | — | — | — |
| Engineering — Dimensions | |||||
| Shoulder diameter of outer ringD 1 | ≈ 155.6 mm | — | — | — | — |
| Raceway diameter of inner ringF | 119 mm | — | — | — | — |
| Chamfer dimensionr 1,2 | min. 2.1 mm | — | — | — | — |
| Chamfer dimensionr 3,4 | min. 2.1 mm | — | — | — | — |
| Permissible axial displacements | max. 2.5 mm | — | — | — | — |
| Load ratings — standard cage | |||||
| Basic dynamic radial load ratingCr | — | — | — | 410000 N | — |
| Basic static radial load ratingC0r | — | — | — | 445000 N | — |
| Logistics | |||||
| Product net weight | 4.81 kg | — | — | — | — |
| eClass code | 23-05-09-01 | — | — | — | — |
| UNSPSC code | 31171505 | — | — | — | — |
| Lubrication-qualified speed — standard cage | |||||
| Thermal speed rating — oil bath | — | — | — | 4300 r/min | — |
| Mechanical limiting speed — forced oil circulation | — | — | — | 4500 r/min | — |
| Limiting speed — grease | — | — | — | 3200 r/min | — |
| Limiting speed — oil bath | — | — | — | 3800 r/min | — |
| Main Dimensions & Performance Data | |||||
| Basic dynamic load rating, radialCr | — | 395,000 N | — | — | — |
| Basic dynamic load rating, radialCr | — | 88,803.957 lbf | — | — | — |
| Basic static load rating, radialC0r | — | 445,000 N | — | — | — |
| Basic static load rating, radialC0r | — | 100,044.964 lbf | — | — | — |
| Fatigue load limit, radialCur | — | 78,000 N | — | — | — |
| Fatigue load limit, radialCur | — | 17,535.971 lbf | — | — | — |
| Manufacturer Identity | |||||
| Schaeffler Product Code | — | 368071 | — | — | — |
| Material Number | — | — | 000000000190072791 | — | — |
| Official Class Key | — | — | — | — | 040-010-000 |
| Base Type | — | NU2220 | — | — | — |
| World Assembly Part Number | — | — | NU2220EJ | — | — |
| Old Designation | — | ["NU2220-E-M1","NU2220E.M1"] | — | — | — |
| Inner Ring Part Number | — | — | 100ARUE22 | — | — |
| Gpsd Group | — | F01 | — | — | — |
| Outer Ring Part Number | — | — | 100ERUE22 | — | — |
| Product Line Id | — | 63 | — | — | — |
| Drawing Number | — | — | M960838 | — | — |
| X Life Marking | — | XL | — | — | — |
| Upc | — | — | 0013992450746 | — | — |
| Official Source System | — | — | CORE BP - DS DF | — | — |
| Official Last Run | — | — | 2026-08-23T20:02:46.733 | — | — |
| SAP material number | — | 0167385780000 | — | — | — |
| Base product | — | 2305090102 | — | — | — |
| Bearing X designation | — | NU2220-E-XL-M1 | — | — | — |
| Mounting Manager ID | — | NU2220-E-XL-M1 | — | — | — |
| Grease application ID | — | NU2220-E-XL-M1 | — | — | — |
| Mounting dimensions | |||||
| Minimum diameter shaft shoulderda min | — | 112 mm | — | — | — |
| Minimum diameter shaft shoulderda min | — | 4.409 in | — | — | — |
| Maximum diameter of shaft shoulderda max | — | 117 mm | — | — | — |
| Maximum diameter of shaft shoulderda max | — | 4.606 in | — | — | — |
| Minimum shaft shoulderdb min | — | 122 mm | — | — | — |
| Minimum shaft shoulderdb min | — | 4.803 in | — | — | — |
| Maximum diameter of housing shoulderDa max | — | 168 mm | — | — | — |
| Maximum diameter of housing shoulderDa max | — | 6.614 in | — | — | — |
| Maximum recess radiusra max | — | 2 mm | — | — | — |
| Maximum recess radiusra max | — | 0.079 in | — | — | — |
| Maximum recess radiusra1 max | — | 2 mm | — | — | — |
| Maximum recess radiusra1 max | — | 0.079 in | — | — | — |
| Mounting dimensions — shown arrangement | |||||
| Minimum shaft shoulder diameterdb min. | — | — | — | 111 mm | — |
| Maximum housing shoulder diameterDa max. | — | — | — | 169 mm | — |
| Maximum adjusting-ring diameter (NU/NJ arrangement)db max. | — | — | — | 116 mm | — |
| Maximum adjacent fillet radiusra max. | — | — | — | 2 mm | — |
| Maximum secondary adjacent fillet radiusrb max. | — | — | — | 2 mm | — |
| Product characteristics | |||||
| DesignE | — | Increased Capacity Design | — | — | — |
| Radial internal clearanceCN (Group N) | — | Normal internal clearance | — | — | — |
| Tolerance classPN | — | Normal (ISO 492:2023) | — | — | — |
| Number of rows1 | — | Single-row design | — | — | — |
| Product identity | |||||
| Official product category | Cylindrical roller bearings | — | — | — | — |
| Official taxonomy path | /products/rolling-bearings/roller-bearings/cylindrical-roller-bearings/single-row-cylindrical-roller-bearings | — | — | — | — |
| Structure group ID | BC1_001_101 | — | — | — | — |
| Available from SKF | Yes | — | — | — | — |
| Remanufacturable | No | — | — | — | — |
| Product Identity | |||||
| Construction | — | Cylindrical roller bearing NU..-E-XL-M1, with cage, single row, non-locating bearing, 2 ribs on outer ring, 0 ribs on inner ring (smooth), type NU, Running accuracy in P6 | Single Row Cylindrical Roller Bearing | Imperial Series | 3.9370 in Bore | 7.0866 in OD | 1.8110 in Width | Open | Cylindrical Bore | Stamped Window Steel Cage | C0 Clearance | — | — |
| Type Description | — | — | Cylindrical 1-Row | — | — |
| Short Description | — | Cylindrical roller bearing | — | — | — |
| Number Of Rows | 1 | — | 1 | — | — |
| Tapered Bore | — | — | N | — | — |
| Properties | |||||
| Bearing part | Complete bearing | — | — | — | — |
| Axial displacement capability | In both directions | — | — | — | — |
| Locating feature, bearing outer ring | Without | — | — | — | — |
| Bore type | Cylindrical | — | — | — | — |
| Number of flanges, outer ring | 2 | — | — | — | — |
| Number of flanges, inner ring | 0 | — | — | — | — |
| Loose flange | None | — | — | — | — |
| Radial internal clearance | CN | — | — | — | — |
| Tolerance class | Normal | — | — | — | — |
| Coating | Without | — | — | — | — |
| Relubrication feature | Without | — | — | — | — |
| Indicative carbon footprint for new product | 17.8 kg CO 2 e | — | — | — | — |
| Technical Data | |||||
| d | — | — | — | — | 180 mm |
| B | — | — | — | — | 46 mm |
| R(Min.) | — | — | — | — | 2.1 mm |
| R1(Min.) | — | — | — | — | 2.1 mm |
| Bore Diameter (D) | — | 100 mm | — | — | — |
| Overall Width | — | — | 0.000 mm | — | — |
| Fw | — | — | — | — | 120 mm |
| Outside Diamater (D) | — | 180 mm | — | — | — |
| Radial Rating | — | — | 377,000 N | — | — |
| Ew | — | — | — | — | - mm |
| Total Width (B) | — | 46 mm | — | — | — |
| Axial Rating | — | — | 0 N | — | — |
| Basic Load Ratings : Cr | — | — | — | — | 322 kN |
| Basic Dynamic Load Rating, Radial (Cr) | — | 395,000 N | — | — | — |
| Dynamic Rating C1 | — | — | 377,000 N | — | — |
| Basic Load Ratings : C0R | — | — | — | — | 338 kN |
| Basic Static Load Rating, Radial (C0R) | — | 445,000 N | — | — | — |
| Dynamic Rating C90 | — | — | 0 N | — | — |
| Fatigue Load Limit : Cu | — | — | — | — | 47.3 kN |
| Raceway Diameter Inner Ring (F) | — | 119 mm | — | — | — |
| Dynamic Axial Rating Ca90 | — | — | 0 N | — | — |
| Limiting Speeds(Grease Lub.) | — | — | — | — | 3100 min-1 |
| Operating Temperature Min. (Tmin) | — | -30 °C | — | — | — |
| Dynamic Axial Rating Ca1 | — | — | 0 N | — | — |
| Limiting Speeds(Oil Lub.) | — | — | — | — | 4200 min-1 |
| Minimum Diameter Shaft Shoulder (Da) | — | 112 mm | — | — | — |
| Static Radial Rating C0 | — | — | 451,000 N | — | — |
| Sd1 | — | — | — | — | - mm |
| Operating Temperature Max. (Tmax) | — | 150 °C | — | — | — |
| Extended Dynamic Rating Ce | — | — | 0 N | — | — |
| B1 | — | — | — | — | - mm |
| Limiting Speed (Limiting Spe) | — | 6,800 1/min | — | — | — |
| Static Axial Rating C0A | — | — | 0 N | — | — |
| B2 | — | — | — | — | - mm |
| Reference Speed (Nϑr) | — | 2,900 1/min | — | — | — |
| Da(Min.) | — | — | — | — | - mm |
| Maximum Recess Radius (Ra Max) | — | 2 mm | — | — | — |
| Db(Min.) | — | — | — | — | - mm |
| Maximum Diameter Of Housing Shoulder (Da) | — | 168 mm | — | — | — |
| Db(Max.) | — | — | — | — | - mm |
| Minimum Chamfer Dimension (R1 Min) | — | 2.1 mm | — | — | — |
| Dc(Min.) | — | — | — | — | - mm |
| Axial Displacement (S) | — | 2.5 mm | — | — | — |
| Dd(Min.) | — | — | — | — | - mm |
| Minimum Rib Diameter Outer Ring (D1 Min) | — | 156.9 mm | — | — | — |
| Da(Max.) | — | — | — | — | 169 mm |
| Maximum Diameter Of Shaft Shoulder (Da Max) | — | 117 mm | — | — | — |
| Maximum Recess Radius (Ra1 Max) | — | 2 mm | — | — | — |
| Minimum Chamfer Dimension (Rmin) | — | 2.1 mm | — | — | — |
| Ra(Max.) | — | — | — | — | 2 mm |
| Raceway Diameter Outer Ring (E) | — | 163 mm | — | — | — |
| Rb(Max.) | — | — | — | — | 2 mm |
| Minimum Shaft Shoulder (Db Min) | — | 122 mm | — | — | — |
| Mass(Refer.) | — | — | — | — | 4.67 kg |
| Fatigue Load Limit, Radial (Cur) | — | 78,000 N | — | — | — |
| Temperature range | |||||
| Operating temperature min.Tmin | — | -30 °C | — | — | — |
| Operating temperature min.Tmin | — | -22 °F | — | — | — |
| Operating temperature max.Tmax | — | 150 °C | — | — | — |
| Operating temperature max.Tmax | — | 302 °F | — | — | — |
Automatic matching is a search aid, not an interchangeability declaration. Confirm the full suffix, tolerances, internal design and application limits before substitution.