Cross-brand designation analysis
COMPARE / VERIFY
Same-model Comparison
Explore products that share a base designation across loaded brands, with dimensional agreement and data gaps shown clearly.
Automatic candidate selection
One base designation across loaded brands
Exact designations rank first. Dimensions, suffixes and other technical differences remain visible so the result is not mistaken for an interchangeability declaration.
Dimensions verified
“NU2040” across 2 loaded brands
At least two brands share the same bore, outside diameter and width. Use Custom Compare when you want to choose exact suffix variants yourself.
Technical comparison
Choose exact variants instead →Brand differences at a glance
| Parameter | SKFNU 2040 ECM/C703H200 × 310 × 66 mm | FAGNU2040-E-XL-M1200 × 310 × 66 mm |
|---|---|---|
| Comparable specifications | ||
| Brand | SKF | FAG |
| Designation | NU 2040 ECM/C703H | NU2040-E-XL-M1 |
| Product family | Cylindrical roller bearings | — |
| Detailed type | Single row cylindrical roller bearing, nu design | Cylindrical roller bearings |
| Series | — | NU2040 |
| Bore diameterd | 200 mm | 200 mm |
| Outside diameterD | 310 mm | 310 mm |
| WidthB | 66 mm | 66 mm |
| Basic dynamic load ratingC | 737 kN | 880 kN |
| Basic static load ratingC0 | 1220 kN | 1210 kN |
| Fatigue load limitPu | — | 183 kN |
| Reference speednref | 2000 r/min | 1750 r/min |
| Limiting speednG | 2400 r/min | 3900 r/min |
| Mass≈m | 19.3 kg | 18.1 kg |
| Precision class | — | PN — Normal (ISO 492:2023) |
| Internal clearance | C3H | CN (Group N) — Normal internal clearance |
| Sealing | Without | — |
| Cage | Machined brass | M1 — Two Piece Brass Cage Roller Guided |
| Lubricant | None | — |
| Minimum operating temperatureTmin | — | -30 °C |
| Maximum operating temperatureTmax | — | 150 °C |
| Capabilities & suitability | ||
| Radial load capacity | — | Yes |
| Suitable for grease lubrication | — | Yes |
| Suitable for oil lubrication | — | Yes |
| Unsealed design | — | Yes |
| Dimensions | ||
| Minimum chamfer dimensionrmin | — | 2.1 mm |
| Minimum chamfer dimensionrmin | — | 0.083 in |
| Minimum chamfer dimensionr1 min | — | 2.1 mm |
| Minimum chamfer dimensionr1 min | — | 0.083 in |
| Axial displacements | — | 5.5 mm |
| Axial displacements | — | 0.217 in |
| Raceway diameter outer ringE | — | 287 mm |
| Raceway diameter outer ringE | — | 11.299 in |
| Raceway diameter inner ringF | — | 227 mm |
| Raceway diameter inner ringF | — | 8.937 in |
| Minimum rib diameter outer ringD1 min | — | 276.7 mm |
| Minimum rib diameter outer ringD1 min | — | 10.894 in |
| Logistics | ||
| Product net weight | 19.3 kg | — |
| eClass code | 23-05-09-01 | — |
| UNSPSC code | 31171505 | — |
| Main Dimensions & Performance Data | ||
| Basic dynamic load rating, radialCr | — | 880,000 N |
| Basic dynamic load rating, radialCr | — | 197,841.727 lbf |
| Basic static load rating, radialC0r | — | 1,210,000 N |
| Basic static load rating, radialC0r | — | 272,032.374 lbf |
| Fatigue load limit, radialCur | — | 183,000 N |
| Fatigue load limit, radialCur | — | 41,142.086 lbf |
| Manufacturer Identity | ||
| Schaeffler Product Code | — | 367950 |
| Base Type | — | NU2040 |
| Old Designation | — | ["NU2040-E-M1","NU2040E.M1"] |
| Gpsd Group | — | F01 |
| Product Line Id | — | 63 |
| X Life Marking | — | XL |
| SAP material number | — | 0396176880000 |
| Base product | — | 2305090102 |
| Bearing X designation | — | NU2040-E-XL-M1 |
| Mounting Manager ID | — | NU2040-E-XL-M1 |
| Grease application ID | — | NU2040-E-XL-M1 |
| Mounting dimensions | ||
| Minimum diameter shaft shoulderda min | — | 210 mm |
| Minimum diameter shaft shoulderda min | — | 8.268 in |
| Maximum diameter of shaft shoulderda max | — | 224 mm |
| Maximum diameter of shaft shoulderda max | — | 8.819 in |
| Minimum shaft shoulderdb min | — | 230 mm |
| Minimum shaft shoulderdb min | — | 9.055 in |
| Maximum diameter of housing shoulderDa max | — | 300 mm |
| Maximum diameter of housing shoulderDa max | — | 11.811 in |
| Maximum recess radiusra max | — | 2 mm |
| Maximum recess radiusra max | — | 0.079 in |
| Maximum recess radiusra1 max | — | 2 mm |
| Maximum recess radiusra1 max | — | 0.079 in |
| Product characteristics | ||
| DesignE | — | Increased Capacity Design |
| Radial internal clearanceCN (Group N) | — | Normal internal clearance |
| Tolerance classPN | — | Normal (ISO 492:2023) |
| Number of rows1 | — | Single-row design |
| Product identity | ||
| Official product category | Cylindrical roller bearings | — |
| Official taxonomy path | /products/rolling-bearings/roller-bearings/cylindrical-roller-bearings/single-row-cylindrical-roller-bearings | — |
| Structure group ID | BC1_001_101 | — |
| Available from SKF | Yes | — |
| Remanufacturable | Yes | — |
| Product Identity | ||
| Construction | — | Cylindrical roller bearing NU..-E-XL-M1, with cage, single row, non-locating bearing, 2 ribs on outer ring, 0 ribs on inner ring (smooth), type NU, Running accuracy in P6 |
| Short Description | — | Cylindrical roller bearing |
| Properties | ||
| Bearing part | Complete bearing | — |
| Axial displacement capability | In both directions | — |
| Number of rows | 1 | — |
| Locating feature, bearing outer ring | Without | — |
| Bore type | Cylindrical | — |
| Number of flanges, outer ring | 2 | — |
| Number of flanges, inner ring | 0 | — |
| Loose flange | None | — |
| Radial internal clearance | C3H | — |
| Coating | Without | — |
| Relubrication feature | Without | — |
| Candidate for remanufacturing | Yes | — |
| Indicative carbon footprint for new product | 71.4 kg CO 2 e | — |
| Indicative carbon footprint for remanufactured product | 23.7 kg CO 2 e | — |
| Technical Data | ||
| Bore Diameter (D) | — | 200 mm |
| Outside Diamater (D) | — | 310 mm |
| Total Width (B) | — | 66 mm |
| Basic Dynamic Load Rating, Radial (Cr) | — | 880,000 N |
| Basic Static Load Rating, Radial (C0R) | — | 1,210,000 N |
| Raceway Diameter Inner Ring (F) | — | 227 mm |
| Operating Temperature Min. (Tmin) | — | -30 °C |
| Minimum Diameter Shaft Shoulder (Da) | — | 210 mm |
| Operating Temperature Max. (Tmax) | — | 150 °C |
| Limiting Speed (Limiting Spe) | — | 3,900 1/min |
| Reference Speed (Nϑr) | — | 1,750 1/min |
| Maximum Recess Radius (Ra Max) | — | 2 mm |
| Maximum Diameter Of Housing Shoulder (Da) | — | 300 mm |
| Minimum Chamfer Dimension (R1 Min) | — | 2.1 mm |
| Axial Displacement (S) | — | 5.5 mm |
| Minimum Rib Diameter Outer Ring (D1 Min) | — | 276.7 mm |
| Maximum Diameter Of Shaft Shoulder (Da Max) | — | 224 mm |
| Maximum Recess Radius (Ra1 Max) | — | 2 mm |
| Minimum Chamfer Dimension (Rmin) | — | 2.1 mm |
| Raceway Diameter Outer Ring (E) | — | 287 mm |
| Minimum Shaft Shoulder (Db Min) | — | 230 mm |
| Fatigue Load Limit, Radial (Cur) | — | 183,000 N |
| Temperature range | ||
| Operating temperature min.Tmin | — | -30 °C |
| Operating temperature min.Tmin | — | -22 °F |
| Operating temperature max.Tmax | — | 150 °C |
| Operating temperature max.Tmax | — | 302 °F |
Automatic matching is a search aid, not an interchangeability declaration. Confirm the full suffix, tolerances, internal design and application limits before substitution.