Cross-brand designation analysis
COMPARE / VERIFY
Same-model Comparison
Explore products that share a base designation across loaded brands, with dimensional agreement and data gaps shown clearly.
Automatic candidate selection
One base designation across loaded brands
Exact designations rank first. Dimensions, suffixes and other technical differences remain visible so the result is not mistaken for an interchangeability declaration.
Dimensions verified
“NU1064” across 5 loaded brands
At least two brands share the same bore, outside diameter and width. Use Custom Compare when you want to choose exact suffix variants yourself.
Technical comparison
Choose exact variants instead →Brand differences at a glance
| Parameter | SKFNU 1064 MA320 × 480 × 74 mm | FAGNU1064-M1320 × 480 × 74 mm | TIMKENNU1064MA320 × 480 × 74 mm | NSKNU1064320 × 480 × 74 mm | KOYONU1064320 × 480 × 74 mm |
|---|---|---|---|---|---|
| Comparable specifications | |||||
| Brand | SKF | FAG | TIMKEN | NSK | KOYO |
| Designation | NU 1064 MA | NU1064-M1 | NU1064MA | NU1064 | NU1064 |
| Product family | Cylindrical roller bearings | — | Cylindrical 1-Row | Cylindrical roller bearing | Single-row / NU |
| Detailed type | Single row cylindrical roller bearing, nu design | Cylindrical roller bearings | Cylindrical roller bearings | Cylindrical roller bearings | Cylindrical roller bearings |
| Series | — | NU1064 | EX26210 | — | — |
| Bore diameterd | 320 mm | 320 mm | 320 mm | 320 mm | 320 mm |
| Outside diameterD | 480 mm | 480 mm | 480 mm | 480 mm | 480 mm |
| WidthB | 74 mm | 74 mm | 74 mm | 74 mm | 74 mm |
| Basic dynamic load ratingC | 880 kN | 910 kN | 1020 kN | 1110 kN | 1150 kN |
| Basic static load ratingC0 | 1430 kN | 1490 kN | 1500 kN | 1470 kN | 1450 kN |
| Fatigue load limitPu | 132 kN | 125 kN | — | — | 152 kN |
| Reference speednref | 1400 r/min | 1300 r/min | — | — | — |
| Limiting speednG | 1900 r/min | 2200 r/min | — | — | 1100 r/min |
| Mass≈m | 48.5 kg | 46.1 kg | 45.9 kg | — | 48.4 kg |
| Precision class | — | PN — Normal (ISO 492:2023) | — | — | — |
| Internal clearance | CN | CN (Group N) — Normal internal clearance | — | — | — |
| Sealing | Without | — | Open | — | — |
| Cage | Machined brass | M1 — Two Piece Brass Cage Roller Guided | Window Brass cage | Machined brass | — |
| Lubricant | None | — | — | — | — |
| Minimum operating temperatureTmin | — | -30 °C | — | — | — |
| Maximum operating temperatureTmax | — | 150 °C | — | — | — |
| Boundary dimensions | |||||
| Bearing widthB | — | — | — | 74 mm | — |
| Minimum bearing chamferr min. | — | — | — | 4 mm | — |
| Minimum secondary bearing chamferr1 min. | — | — | — | 4 mm | — |
| Roller inscribed circle diameterFw | — | — | — | 360 mm | — |
| Calculation Factors | |||||
| K Factor | — | — | 0.00 | — | — |
| Y1 Factor | — | — | 0.00 | — | — |
| Y2 Factor | — | — | 0.00 | — | — |
| Y0 Factor | — | — | 0.00 | — | — |
| E Factor | — | — | 0.00 | — | — |
| Cg Factor | — | — | 0.1729 | — | — |
| Capabilities & suitability | |||||
| Radial load capacity | — | Yes | — | — | — |
| Suitable for grease lubrication | — | Yes | — | — | — |
| Suitable for oil lubrication | — | Yes | — | — | — |
| Unsealed design | — | Yes | — | — | — |
| Largebearing | — | Yes | — | — | — |
| Catalogue reference mass | |||||
| Approximate shared-row mass — not separately stated for each rib arrangement | — | — | — | 46.1 kg | — |
| Classification | |||||
| Official Category Path | — | — | — | — | Cylindrical roller bearings - Single-row - NU |
| Official Classification 1 | — | — | — | — | Cylindrical roller bearings / Single-row / NU |
| Construction | |||||
| Single-row construction type | — | — | — | NU | — |
| Rib arrangement | — | — | — | Two outer-ring ribs; ribless inner ring | — |
| Standard cage material | — | — | — | Machined brass | — |
| Standard cage marking | — | — | — | M is usually omitted for this series | — |
| Other cage codes listed for this catalogue row | — | — | — | None listed in this row | — |
| Precision — designation omission rule | — | — | — | ISO Normal when no precision suffix is specified | — |
| Clearance identification — verify interchangeability | — | — | — | No clearance suffix shown. CN omission applies to interchangeable designs; do not infer a numerical clearance. | — |
| Optimized crowning note | — | — | — | No optimized-crowning asterisk on this row | — |
| Dimensions | |||||
| Minimum chamfer dimensionrmin | — | 4 mm | — | — | — |
| Minimum chamfer dimensionrmin | — | 0.157 in | — | — | — |
| Minimum chamfer dimensionr1 min | — | 4 mm | — | — | — |
| Minimum chamfer dimensionr1 min | — | 0.157 in | — | — | — |
| Axial displacements | — | 11.5 mm | — | — | — |
| Axial displacements | — | 0.453 in | — | — | — |
| Raceway diameter outer ringE | — | 440 mm | — | — | — |
| Raceway diameter outer ringE | — | 17.323 in | — | — | — |
| Raceway diameter inner ringF | — | 360 mm | — | — | — |
| Raceway diameter inner ringF | — | 14.173 in | — | — | — |
| Minimum rib diameter outer ringD1 min | — | 425.1 mm | — | — | — |
| Minimum rib diameter outer ringD1 min | — | 16.736 in | — | — | — |
| Engineering — Abutment dimensions | |||||
| Diameter of spacer sleeved a | max. 355 mm | — | — | — | — |
| Diameter of shaft abutmentd b | min. 364 mm | — | — | — | — |
| Diameter of housing abutmentD a | max. 465 mm | — | — | — | — |
| Radius of filletr a | max. 3 mm | — | — | — | — |
| Engineering — Calculation data | |||||
| Minimum load factork r | 0.15 | — | — | — | — |
| Limiting valuee | 0.2 | — | — | — | — |
| Calculation factorY | 0.6 | — | — | — | — |
| Engineering — Dimensions | |||||
| Shoulder diameter of outer ringD 1 | ≈ 422 mm | — | — | — | — |
| Raceway diameter of inner ringF | 360 mm | — | — | — | — |
| Chamfer dimensionr 1,2 | min. 4 mm | — | — | — | — |
| Permissible axial displacements | max. 6 mm | — | — | — | — |
| Load ratings — standard cage | |||||
| Basic dynamic radial load ratingCr | — | — | — | 1110000 N | — |
| Basic static radial load ratingC0r | — | — | — | 1470000 N | — |
| Logistics | |||||
| Product net weight | 48.5 kg | — | — | — | — |
| eClass code | 23-05-09-01 | — | — | — | — |
| UNSPSC code | 31171505 | — | — | — | — |
| Lubrication-qualified speed — standard cage | |||||
| Thermal speed rating — oil bath | — | — | — | 1500 r/min | — |
| Mechanical limiting speed — forced oil circulation | — | — | — | Not stated in this catalogue row | — |
| Limiting speed — grease | — | — | — | 1200 r/min | — |
| Limiting speed — oil bath | — | — | — | 1400 r/min | — |
| Main Dimensions & Performance Data | |||||
| Basic dynamic load rating, radialCr | — | 910,000 N | — | — | — |
| Basic dynamic load rating, radialCr | — | 204,586.331 lbf | — | — | — |
| Basic static load rating, radialC0r | — | 1,490,000 N | — | — | — |
| Basic static load rating, radialC0r | — | 334,982.014 lbf | — | — | — |
| Fatigue load limit, radialCur | — | 125,000 N | — | — | — |
| Fatigue load limit, radialCur | — | 28,102.518 lbf | — | — | — |
| Manufacturer Identity | |||||
| Schaeffler Product Code | — | 369117 | — | — | — |
| Material Number | — | — | 000000000100207294 | — | — |
| Official Class Key | — | — | — | — | 040-010-000 |
| Base Type | — | NU1064 | — | — | — |
| World Assembly Part Number | — | — | NU1064MA | — | — |
| Old Designation | — | ["NU1064M1"] | — | — | — |
| Inner Ring Part Number | — | — | 320ARUA10 | — | — |
| Gpsd Group | — | F01 | — | — | — |
| Outer Ring Part Number | — | — | 320ERUA10 | — | — |
| Product Line Id | — | 75 | — | — | — |
| Drawing Number | — | — | M104630 | — | — |
| Upc | — | — | 0053893884578 | — | — |
| Official Source System | — | — | CORE BP - DS DF | — | — |
| Official Last Run | — | — | 2026-08-23T20:02:48.513 | — | — |
| SAP material number | — | 0167374820000 | — | — | — |
| Base product | — | 2305090102 | — | — | — |
| Bearing X designation | — | NU1064-M1 | — | — | — |
| Mounting Manager ID | — | NU1064-M1 | — | — | — |
| Grease application ID | — | NU1064-M1 | — | — | — |
| Mounting dimensions | |||||
| Minimum diameter shaft shoulderda min | — | 335 mm | — | — | — |
| Minimum diameter shaft shoulderda min | — | 13.189 in | — | — | — |
| Maximum diameter of shaft shoulderda max | — | 356 mm | — | — | — |
| Maximum diameter of shaft shoulderda max | — | 14.016 in | — | — | — |
| Minimum shaft shoulderdb min | — | 365 mm | — | — | — |
| Minimum shaft shoulderdb min | — | 14.37 in | — | — | — |
| Maximum diameter of housing shoulderDa max | — | 465 mm | — | — | — |
| Maximum diameter of housing shoulderDa max | — | 18.307 in | — | — | — |
| Maximum recess radiusra max | — | 3 mm | — | — | — |
| Maximum recess radiusra max | — | 0.118 in | — | — | — |
| Maximum recess radiusra1 max | — | 3 mm | — | — | — |
| Maximum recess radiusra1 max | — | 0.118 in | — | — | — |
| Mounting dimensions — shown arrangement | |||||
| Minimum shaft shoulder diameterdb min. | — | — | — | 336 mm | — |
| Maximum housing shoulder diameterDa max. | — | — | — | 464 mm | — |
| Maximum adjusting-ring diameter (NU/NJ arrangement)db max. | — | — | — | 356 mm | — |
| Maximum adjacent fillet radiusra max. | — | — | — | 3 mm | — |
| Maximum secondary adjacent fillet radiusrb max. | — | — | — | 3 mm | — |
| Product characteristics | |||||
| Design | — | Standard | — | — | — |
| Radial internal clearanceCN (Group N) | — | Normal internal clearance | — | — | — |
| Tolerance classPN | — | Normal (ISO 492:2023) | — | — | — |
| Number of rows1 | — | Single-row design | — | — | — |
| Product identity | |||||
| Official product category | Cylindrical roller bearings | — | — | — | — |
| Official taxonomy path | /products/rolling-bearings/roller-bearings/cylindrical-roller-bearings/single-row-cylindrical-roller-bearings | — | — | — | — |
| Structure group ID | BC1_001_101 | — | — | — | — |
| Available from SKF | Yes | — | — | — | — |
| Remanufacturable | Yes | — | — | — | — |
| Product Identity | |||||
| Construction | — | Cylindrical roller bearing NU..-M1, with cage, single row, non-locating bearing, 2 ribs on outer ring, 0 ribs on inner ring (smooth), type NU, Running accuracy in P6 | Single Row Cylindrical Roller Bearing | Imperial Series | 12.5984 in Bore | 18.8976 in OD | 2.9134 in Width | Open | Cylindrical Bore | Machined Window Brass Cage | C0 Clearance | — | — |
| Short Description | — | Cylindrical roller bearing | — | — | — |
| Type Description | — | — | Cylindrical 1-Row | — | — |
| Number Of Rows | 1 | — | 1 | — | — |
| Tapered Bore | — | — | N | — | — |
| Properties | |||||
| Bearing part | Complete bearing | — | — | — | — |
| Axial displacement capability | In both directions | — | — | — | — |
| Locating feature, bearing outer ring | Without | — | — | — | — |
| Bore type | Cylindrical | — | — | — | — |
| Number of flanges, outer ring | 2 | — | — | — | — |
| Number of flanges, inner ring | 0 | — | — | — | — |
| Loose flange | None | — | — | — | — |
| Radial internal clearance | CN | — | — | — | — |
| Tolerance class | Normal | — | — | — | — |
| Coating | Without | — | — | — | — |
| Relubrication feature | Without | — | — | — | — |
| Candidate for remanufacturing | Yes | — | — | — | — |
| Indicative carbon footprint for new product | 179.0 kg CO 2 e | — | — | — | — |
| Indicative carbon footprint for remanufactured product | 59.7 kg CO 2 e | — | — | — | — |
| Technical Data | |||||
| d | — | — | — | — | 480 mm |
| B | — | — | — | — | 74 mm |
| R(Min.) | — | — | — | — | 4 mm |
| Bore Diameter (D) | — | 320 mm | — | — | — |
| R1(Min.) | — | — | — | — | 4 mm |
| Outside Diamater (D) | — | 480 mm | — | — | — |
| Overall Width | — | — | 0.000 mm | — | — |
| Fw | — | — | — | — | 360 mm |
| Total Width (B) | — | 74 mm | — | — | — |
| Radial Rating | — | — | 1,020,000 N | — | — |
| Ew | — | — | — | — | - mm |
| Basic Dynamic Load Rating, Radial (Cr) | — | 910,000 N | — | — | — |
| Axial Rating | — | — | 0 N | — | — |
| Basic Load Ratings : Cr | — | — | — | — | 1150 kN |
| Basic Static Load Rating, Radial (C0R) | — | 1,490,000 N | — | — | — |
| Dynamic Rating C1 | — | — | 1,020,000 N | — | — |
| Basic Load Ratings : C0R | — | — | — | — | 1450 kN |
| Raceway Diameter Inner Ring (F) | — | 360 mm | — | — | — |
| Dynamic Rating C90 | — | — | 0 N | — | — |
| Fatigue Load Limit : Cu | — | — | — | — | 152 kN |
| Operating Temperature Min. (Tmin) | — | -30 °C | — | — | — |
| Dynamic Axial Rating Ca90 | — | — | 0 N | — | — |
| Limiting Speeds(Grease Lub.) | — | — | — | — | 1100 min-1 |
| Minimum Diameter Shaft Shoulder (Da) | — | 335 mm | — | — | — |
| Dynamic Axial Rating Ca1 | — | — | 0 N | — | — |
| Limiting Speeds(Oil Lub.) | — | — | — | — | 1300 min-1 |
| Operating Temperature Max. (Tmax) | — | 150 °C | — | — | — |
| Static Radial Rating C0 | — | — | 1,500,000 N | — | — |
| Sd1 | — | — | — | — | - mm |
| Limiting Speed (Limiting Spe) | — | 2,200 1/min | — | — | — |
| Extended Dynamic Rating Ce | — | — | 0 N | — | — |
| B1 | — | — | — | — | - mm |
| Reference Speed (Nϑr) | — | 1,300 1/min | — | — | — |
| Static Axial Rating C0A | — | — | 0 N | — | — |
| B2 | — | — | — | — | - mm |
| Maximum Recess Radius (Ra Max) | — | 3 mm | — | — | — |
| Da(Min.) | — | — | — | — | - mm |
| Maximum Diameter Of Housing Shoulder (Da) | — | 465 mm | — | — | — |
| Db(Min.) | — | — | — | — | - mm |
| Minimum Chamfer Dimension (R1 Min) | — | 4 mm | — | — | — |
| Db(Max.) | — | — | — | — | - mm |
| Axial Displacement (S) | — | 11.5 mm | — | — | — |
| Dc(Min.) | — | — | — | — | - mm |
| Minimum Rib Diameter Outer Ring (D1 Min) | — | 425.1 mm | — | — | — |
| Dd(Min.) | — | — | — | — | - mm |
| Maximum Diameter Of Shaft Shoulder (Da Max) | — | 356 mm | — | — | — |
| Da(Max.) | — | — | — | — | 464 mm |
| Maximum Recess Radius (Ra1 Max) | — | 3 mm | — | — | — |
| Minimum Chamfer Dimension (Rmin) | — | 4 mm | — | — | — |
| Raceway Diameter Outer Ring (E) | — | 440 mm | — | — | — |
| Ra(Max.) | — | — | — | — | 3 mm |
| Minimum Shaft Shoulder (Db Min) | — | 365 mm | — | — | — |
| Rb(Max.) | — | — | — | — | 3 mm |
| Fatigue Load Limit, Radial (Cur) | — | 125,000 N | — | — | — |
| Mass(Refer.) | — | — | — | — | 48.4 kg |
| Temperature range | |||||
| Operating temperature min.Tmin | — | -30 °C | — | — | — |
| Operating temperature min.Tmin | — | -22 °F | — | — | — |
| Operating temperature max.Tmax | — | 150 °C | — | — | — |
| Operating temperature max.Tmax | — | 302 °F | — | — | — |
Automatic matching is a search aid, not an interchangeability declaration. Confirm the full suffix, tolerances, internal design and application limits before substitution.