Cross-brand designation analysis
COMPARE / VERIFY
Same-model Comparison
Explore products that share a base designation across loaded brands, with dimensional agreement and data gaps shown clearly.
Automatic candidate selection
One base designation across loaded brands
Exact designations rank first. Dimensions, suffixes and other technical differences remain visible so the result is not mistaken for an interchangeability declaration.
Dimensions verified
“NU1060” across 4 loaded brands
At least two brands share the same bore, outside diameter and width. Use Custom Compare when you want to choose exact suffix variants yourself.
Technical comparison
Choose exact variants instead →Brand differences at a glance
| Parameter | SKFNU 1060 MA300 × 460 × 74 mm | FAGNU1060-M1300 × 460 × 74 mm | NSKNU1060300 × 460 × 74 mm | KOYONU1060300 × 460 × 74 mm |
|---|---|---|---|---|
| Comparable specifications | ||||
| Brand | SKF | FAG | NSK | KOYO |
| Designation | NU 1060 MA | NU1060-M1 | NU1060 | NU1060 |
| Product family | Cylindrical roller bearings | — | Cylindrical roller bearing | Single-row / NU |
| Detailed type | Single row cylindrical roller bearing, nu design | Cylindrical roller bearings | Cylindrical roller bearings | Cylindrical roller bearings |
| Series | — | NU1060 | — | — |
| Bore diameterd | 300 mm | 300 mm | 300 mm | 300 mm |
| Outside diameterD | 460 mm | 460 mm | 460 mm | 460 mm |
| WidthB | 74 mm | 74 mm | 74 mm | 74 mm |
| Basic dynamic load ratingC | 1000 kN | 900 kN | 1090 kN | 1120 kN |
| Basic static load ratingC0 | 1370 kN | 1430 kN | 1400 kN | 1380 kN |
| Fatigue load limitPu | 129 kN | 122 kN | — | 147 kN |
| Reference speednref | 1500 r/min | 1390 r/min | — | — |
| Limiting speednG | 2000 r/min | 2290 r/min | — | 1200 r/min |
| Mass≈m | 46.5 kg | 43.14 kg | — | 44.1 kg |
| Precision class | — | PN — Normal (ISO 492:2023) | — | — |
| Internal clearance | CN | CN (Group N) — Normal internal clearance | — | — |
| Sealing | Without | — | — | — |
| Cage | Machined brass | M1 — Two Piece Brass Cage Roller Guided | Machined brass | — |
| Lubricant | None | — | — | — |
| Minimum operating temperatureTmin | — | -30 °C | — | — |
| Maximum operating temperatureTmax | — | 150 °C | — | — |
| Boundary dimensions | ||||
| Bearing widthB | — | — | 74 mm | — |
| Minimum bearing chamferr min. | — | — | 4 mm | — |
| Minimum secondary bearing chamferr1 min. | — | — | 4 mm | — |
| Roller inscribed circle diameterFw | — | — | 340 mm | — |
| Capabilities & suitability | ||||
| Radial load capacity | — | Yes | — | — |
| Suitable for grease lubrication | — | Yes | — | — |
| Suitable for oil lubrication | — | Yes | — | — |
| Unsealed design | — | Yes | — | — |
| Largebearing | — | Yes | — | — |
| Catalogue reference mass | ||||
| Approximate shared-row mass — not separately stated for each rib arrangement | — | — | 43.7 kg | — |
| Classification | ||||
| Official Category Path | — | — | — | Cylindrical roller bearings - Single-row - NU |
| Official Classification 1 | — | — | — | Cylindrical roller bearings / Single-row / NU |
| Construction | ||||
| Single-row construction type | — | — | NU | — |
| Rib arrangement | — | — | Two outer-ring ribs; ribless inner ring | — |
| Standard cage material | — | — | Machined brass | — |
| Standard cage marking | — | — | M is usually omitted for this series | — |
| Other cage codes listed for this catalogue row | — | — | None listed in this row | — |
| Precision — designation omission rule | — | — | ISO Normal when no precision suffix is specified | — |
| Clearance identification — verify interchangeability | — | — | No clearance suffix shown. CN omission applies to interchangeable designs; do not infer a numerical clearance. | — |
| Optimized crowning note | — | — | No optimized-crowning asterisk on this row | — |
| Dimensions | ||||
| Minimum chamfer dimensionrmin | — | 4 mm | — | — |
| Minimum chamfer dimensionrmin | — | 0.157 in | — | — |
| Minimum chamfer dimensionr1 min | — | 4 mm | — | — |
| Minimum chamfer dimensionr1 min | — | 0.157 in | — | — |
| Axial displacements | — | 7.9 mm | — | — |
| Axial displacements | — | 0.311 in | — | — |
| Raceway diameter outer ringE | — | 420 mm | — | — |
| Raceway diameter outer ringE | — | 16.535 in | — | — |
| Raceway diameter inner ringF | — | 340 mm | — | — |
| Raceway diameter inner ringF | — | 13.386 in | — | — |
| Minimum rib diameter outer ringD1 min | — | 405.2 mm | — | — |
| Minimum rib diameter outer ringD1 min | — | 15.953 in | — | — |
| Engineering — Abutment dimensions | ||||
| Diameter of spacer sleeved a | max. 335 mm | — | — | — |
| Diameter of shaft abutmentd b | min. 344 mm | — | — | — |
| Diameter of housing abutmentD a | max. 443 mm | — | — | — |
| Radius of filletr a | max. 3 mm | — | — | — |
| Engineering — Calculation data | ||||
| SKF performance class | SKF Explorer | — | — | — |
| Minimum load factork r | 0.15 | — | — | — |
| Limiting valuee | 0.2 | — | — | — |
| Calculation factorY | 0.6 | — | — | — |
| Engineering — Dimensions | ||||
| Shoulder diameter of outer ringD 1 | ≈ 402 mm | — | — | — |
| Raceway diameter of inner ringF | 340 mm | — | — | — |
| Chamfer dimensionr 1,2 | min. 4 mm | — | — | — |
| Permissible axial displacements | max. 4 mm | — | — | — |
| Load ratings — standard cage | ||||
| Basic dynamic radial load ratingCr | — | — | 1090000 N | — |
| Basic static radial load ratingC0r | — | — | 1400000 N | — |
| Logistics | ||||
| Product net weight | 46.5 kg | — | — | — |
| eClass code | 23-05-09-01 | — | — | — |
| UNSPSC code | 31171505 | — | — | — |
| Lubrication-qualified speed — standard cage | ||||
| Thermal speed rating — oil bath | — | — | 1600 r/min | — |
| Mechanical limiting speed — forced oil circulation | — | — | Not stated in this catalogue row | — |
| Limiting speed — grease | — | — | 1300 r/min | — |
| Limiting speed — oil bath | — | — | 1500 r/min | — |
| Main Dimensions & Performance Data | ||||
| Basic dynamic load rating, radialCr | — | 900,000 N | — | — |
| Basic dynamic load rating, radialCr | — | 202,338.129 lbf | — | — |
| Basic static load rating, radialC0r | — | 1,430,000 N | — | — |
| Basic static load rating, radialC0r | — | 321,492.806 lbf | — | — |
| Fatigue load limit, radialCur | — | 122,000 N | — | — |
| Fatigue load limit, radialCur | — | 27,428.058 lbf | — | — |
| Manufacturer Identity | ||||
| Schaeffler Product Code | — | 369114 | — | — |
| Official Class Key | — | — | — | 040-010-000 |
| Base Type | — | NU1060 | — | — |
| Old Designation | — | ["NU1060M1"] | — | — |
| Gpsd Group | — | F01 | — | — |
| Product Line Id | — | 75 | — | — |
| X Life Marking | — | n.r. | — | — |
| SAP material number | — | 0167374660000 | — | — |
| Base product | — | 2305090102 | — | — |
| Bearing X designation | — | NU1060-M1 | — | — |
| Mounting Manager ID | — | NU1060-M1 | — | — |
| Grease application ID | — | NU1060-M1 | — | — |
| Mounting dimensions | ||||
| Minimum diameter shaft shoulderda min | — | 315 mm | — | — |
| Minimum diameter shaft shoulderda min | — | 12.402 in | — | — |
| Maximum diameter of shaft shoulderda max | — | 336 mm | — | — |
| Maximum diameter of shaft shoulderda max | — | 13.228 in | — | — |
| Minimum shaft shoulderdb min | — | 345 mm | — | — |
| Minimum shaft shoulderdb min | — | 13.583 in | — | — |
| Maximum diameter of housing shoulderDa max | — | 445 mm | — | — |
| Maximum diameter of housing shoulderDa max | — | 17.52 in | — | — |
| Maximum recess radiusra max | — | 3 mm | — | — |
| Maximum recess radiusra max | — | 0.118 in | — | — |
| Maximum recess radiusra1 max | — | 3 mm | — | — |
| Maximum recess radiusra1 max | — | 0.118 in | — | — |
| Mounting dimensions — shown arrangement | ||||
| Minimum shaft shoulder diameterdb min. | — | — | 316 mm | — |
| Maximum housing shoulder diameterDa max. | — | — | 444 mm | — |
| Maximum adjusting-ring diameter (NU/NJ arrangement)db max. | — | — | 336 mm | — |
| Maximum adjacent fillet radiusra max. | — | — | 3 mm | — |
| Maximum secondary adjacent fillet radiusrb max. | — | — | 3 mm | — |
| Product characteristics | ||||
| Design | — | Standard | — | — |
| Radial internal clearanceCN (Group N) | — | Normal internal clearance | — | — |
| Tolerance classPN | — | Normal (ISO 492:2023) | — | — |
| Number of rows1 | — | Single-row design | — | — |
| Product identity | ||||
| Official product category | Cylindrical roller bearings | — | — | — |
| Official taxonomy path | /products/rolling-bearings/roller-bearings/cylindrical-roller-bearings/single-row-cylindrical-roller-bearings | — | — | — |
| Structure group ID | BC1_001_101 | — | — | — |
| Available from SKF | Yes | — | — | — |
| Remanufacturable | Yes | — | — | — |
| Product Identity | ||||
| Construction | — | Cylindrical roller bearing NU..-M1, with cage, single row, non-locating bearing, 2 ribs on outer ring, 0 ribs on inner ring (smooth), type NU, Running accuracy in P6 | — | — |
| Short Description | — | Cylindrical roller bearing | — | — |
| Properties | ||||
| Bearing part | Complete bearing | — | — | — |
| Axial displacement capability | In both directions | — | — | — |
| Number of rows | 1 | — | — | — |
| Locating feature, bearing outer ring | Without | — | — | — |
| Bore type | Cylindrical | — | — | — |
| Number of flanges, outer ring | 2 | — | — | — |
| Number of flanges, inner ring | 0 | — | — | — |
| Loose flange | None | — | — | — |
| Radial internal clearance | CN | — | — | — |
| Tolerance class | Normal | — | — | — |
| Coating | Without | — | — | — |
| Relubrication feature | Without | — | — | — |
| Candidate for remanufacturing | Yes | — | — | — |
| Indicative carbon footprint for new product | 172.0 kg CO 2 e | — | — | — |
| Indicative carbon footprint for remanufactured product | 57.2 kg CO 2 e | — | — | — |
| Technical Data | ||||
| d | — | — | — | 460 mm |
| B | — | — | — | 74 mm |
| R(Min.) | — | — | — | 4 mm |
| R1(Min.) | — | — | — | 4 mm |
| Bore Diameter (D) | — | 300 mm | — | — |
| Fw | — | — | — | 340 mm |
| Outside Diamater (D) | — | 460 mm | — | — |
| Ew | — | — | — | - mm |
| Total Width (B) | — | 74 mm | — | — |
| Basic Load Ratings : Cr | — | — | — | 1120 kN |
| Basic Dynamic Load Rating, Radial (Cr) | — | 900,000 N | — | — |
| Basic Load Ratings : C0R | — | — | — | 1380 kN |
| Basic Static Load Rating, Radial (C0R) | — | 1,430,000 N | — | — |
| Fatigue Load Limit : Cu | — | — | — | 147 kN |
| Raceway Diameter Inner Ring (F) | — | 340 mm | — | — |
| Limiting Speeds(Grease Lub.) | — | — | — | 1200 min-1 |
| Operating Temperature Min. (Tmin) | — | -30 °C | — | — |
| Limiting Speeds(Oil Lub.) | — | — | — | 1400 min-1 |
| Minimum Diameter Shaft Shoulder (Da) | — | 315 mm | — | — |
| Sd1 | — | — | — | - mm |
| Operating Temperature Max. (Tmax) | — | 150 °C | — | — |
| B1 | — | — | — | - mm |
| Limiting Speed (Limiting Spe) | — | 2,290 1/min | — | — |
| B2 | — | — | — | - mm |
| Reference Speed (Nϑr) | — | 1,390 1/min | — | — |
| Da(Min.) | — | — | — | - mm |
| Maximum Recess Radius (Ra Max) | — | 3 mm | — | — |
| Db(Min.) | — | — | — | - mm |
| Maximum Diameter Of Housing Shoulder (Da) | — | 445 mm | — | — |
| Db(Max.) | — | — | — | - mm |
| Minimum Chamfer Dimension (R1 Min) | — | 4 mm | — | — |
| Dc(Min.) | — | — | — | - mm |
| Axial Displacement (S) | — | 7.9 mm | — | — |
| Dd(Min.) | — | — | — | - mm |
| Minimum Rib Diameter Outer Ring (D1 Min) | — | 405.2 mm | — | — |
| Da(Max.) | — | — | — | 444 mm |
| Maximum Diameter Of Shaft Shoulder (Da Max) | — | 336 mm | — | — |
| Maximum Recess Radius (Ra1 Max) | — | 3 mm | — | — |
| Minimum Chamfer Dimension (Rmin) | — | 4 mm | — | — |
| Ra(Max.) | — | — | — | 3 mm |
| Raceway Diameter Outer Ring (E) | — | 420 mm | — | — |
| Rb(Max.) | — | — | — | 3 mm |
| Minimum Shaft Shoulder (Db Min) | — | 345 mm | — | — |
| Mass(Refer.) | — | — | — | 44.1 kg |
| Fatigue Load Limit, Radial (Cur) | — | 122,000 N | — | — |
| Temperature range | ||||
| Operating temperature min.Tmin | — | -30 °C | — | — |
| Operating temperature min.Tmin | — | -22 °F | — | — |
| Operating temperature max.Tmax | — | 150 °C | — | — |
| Operating temperature max.Tmax | — | 302 °F | — | — |
Automatic matching is a search aid, not an interchangeability declaration. Confirm the full suffix, tolerances, internal design and application limits before substitution.