Cross-brand designation analysis
COMPARE / VERIFY
Same-model Comparison
Explore products that share a base designation across loaded brands, with dimensional agreement and data gaps shown clearly.
Cross Reference centre · Interchange verification checklist · Understand suffix differences
You entered NU-3164-ECMA-C3. This table explores the base group NU3164; it does not preserve or approve every requested suffix. Search your complete marking first →
Automatic candidate selection
One base designation across loaded brands
Exact designations rank first. Dimensions, suffixes and other technical differences remain visible so the result is not mistaken for an interchangeability declaration.
Dimensions verified
“NU3164” across 3 loaded brands
At least two brands share the same bore, outside diameter and width. Use Custom Compare when you want to choose exact suffix variants yourself.
Technical comparison
Choose exact variants instead →Brand differences at a glance
| Parameter | SKFNU 3164 ECMA/C3320 × 540 × 176 mm | FAGNU3164-E-M1A-C3320 × 540 × 176 mm | TIMKENNU3164EMAC3320 × 540 × 176 mm |
|---|---|---|---|
| Comparable specifications | |||
| Brand | SKF | FAG | TIMKEN |
| Designation | NU 3164 ECMA/C3 | NU3164-E-M1A-C3 | NU3164EMAC3 |
| Product family | Cylindrical roller bearings | — | Cylindrical 1-Row |
| Detailed type | Single row cylindrical roller bearing, nu design | Cylindrical roller bearings | Cylindrical roller bearings |
| Series | — | NU3164 | NCS-997809 |
| Bore diameterd | 320 mm | 320 mm | 320 mm |
| Outside diameterD | 540 mm | 540 mm | 540 mm |
| WidthB | 176 mm | 176 mm | 176 mm |
| Basic dynamic load ratingC | 3140 kN | 3250 kN | 3590 kN |
| Basic static load ratingC0 | 5400 kN | 5600 kN | 5340 kN |
| Fatigue load limitPu | 450 kN | 550 kN | — |
| Reference speednref | 1000 r/min | 690 r/min | — |
| Limiting speednG | 1700 r/min | 1800 r/min | — |
| Mass≈m | 169 kg | 167.03 kg | 166.8 kg |
| Precision class | — | PN — Normal (ISO 492:2023) | — |
| Internal clearance | C3 | C3 (Group 3) — Internal clearance larger than CN | — |
| Sealing | Without | — | Open |
| Cage | Machined brass | M1A — Two Piece Brass Cage Lip guided | Window Brass cage |
| Lubricant | None | — | — |
| Minimum operating temperatureTmin | — | -30 °C | — |
| Maximum operating temperatureTmax | — | 150 °C | — |
| Calculation Factors | |||
| K Factor | — | — | 0.00 |
| Y1 Factor | — | — | 0.00 |
| Y2 Factor | — | — | 0.00 |
| Y0 Factor | — | — | 0.00 |
| E Factor | — | — | 0.00 |
| Cg Factor | — | — | 0.2258 |
| Capabilities & suitability | |||
| Radial load capacity | — | Yes | — |
| Suitable for grease lubrication | — | Yes | — |
| Suitable for oil lubrication | — | Yes | — |
| Unsealed design | — | Yes | — |
| Dimensions | |||
| Minimum chamfer dimensionrmin | — | 5 mm | — |
| Minimum chamfer dimensionrmin | — | 0.197 in | — |
| Minimum chamfer dimensionr1 min | — | 5 mm | — |
| Minimum chamfer dimensionr1 min | — | 0.197 in | — |
| Axial displacements | — | 12 mm | — |
| Axial displacements | — | 0.472 in | — |
| Raceway diameter outer ringE | — | 496 mm | — |
| Raceway diameter outer ringE | — | 19.528 in | — |
| Raceway diameter inner ringF | — | 368 mm | — |
| Raceway diameter inner ringF | — | 14.488 in | — |
| Minimum rib diameter outer ringD1 min | — | 475.4 mm | — |
| Minimum rib diameter outer ringD1 min | — | 18.717 in | — |
| Engineering — Abutment dimensions | |||
| Diameter of spacer sleeved a | max. 360 mm | — | — |
| Diameter of shaft abutmentd b | min. 372 mm | — | — |
| Diameter of housing abutmentD a | max. 520 mm | — | — |
| Radius of filletr a | max. 4 mm | — | — |
| Radius of filletr b | max. 4 mm | — | — |
| Engineering — Calculation data | |||
| Minimum load factork r | 0.27 | — | — |
| Limiting valuee | 0.3 | — | — |
| Calculation factorY | 0.4 | — | — |
| Engineering — Dimensions | |||
| Shoulder diameter of outer ringD 1 | ≈ 476 mm | — | — |
| Raceway diameter of inner ringF | 368 mm | — | — |
| Chamfer dimensionr 1,2 | min. 5 mm | — | — |
| Chamfer dimensionr 3,4 | min. 5 mm | — | — |
| Permissible axial displacements | max. 9.6 mm | — | — |
| Logistics | |||
| Product net weight | 169.0 kg | — | — |
| eClass code | 23-05-09-01 | — | — |
| UNSPSC code | 31171505 | — | — |
| Main Dimensions & Performance Data | |||
| Basic dynamic load rating, radialCr | — | 3,250,000 N | — |
| Basic dynamic load rating, radialCr | — | 730,665.468 lbf | — |
| Basic static load rating, radialC0r | — | 5,600,000 N | — |
| Basic static load rating, radialC0r | — | 1,258,992.806 lbf | — |
| Fatigue load limit, radialCur | — | 550,000 N | — |
| Fatigue load limit, radialCur | — | 123,651.079 lbf | — |
| Manufacturer Identity | |||
| Schaeffler Product Code | — | 1681694 | — |
| Material Number | — | — | 000000000190039620 |
| Base Type | — | NU3164 | — |
| World Assembly Part Number | — | — | NU3164EMA |
| Gpsd Group | — | F01 | — |
| Inner Ring Part Number | — | — | 320ARUE31 |
| Product Line Id | — | 75 | — |
| Outer Ring Part Number | — | — | 320ERUE31 |
| Drawing Number | — | — | M951346 |
| Upc | — | — | 0013992166456 |
| Official Source System | — | — | CORE BP - DS DF |
| Official Last Run | — | — | 2026-08-23T20:02:47.403 |
| SAP material number | — | 0192485980030 | — |
| Base product | — | 2305090102 | — |
| Bearing X designation | — | NU3164-E-M1A-C3 | — |
| Mounting Manager ID | — | NU3164-E-M1A-C3 | — |
| Grease application ID | — | NU3164-E-M1A-C3 | — |
| Mounting dimensions | |||
| Minimum diameter shaft shoulderda min | — | 340 mm | — |
| Minimum diameter shaft shoulderda min | — | 13.386 in | — |
| Maximum diameter of shaft shoulderda max | — | 364 mm | — |
| Maximum diameter of shaft shoulderda max | — | 14.331 in | — |
| Minimum shaft shoulderdb min | — | 372 mm | — |
| Minimum shaft shoulderdb min | — | 14.646 in | — |
| Maximum diameter of housing shoulderDa max | — | 520 mm | — |
| Maximum diameter of housing shoulderDa max | — | 20.472 in | — |
| Maximum recess radiusra max | — | 4 mm | — |
| Maximum recess radiusra max | — | 0.157 in | — |
| Maximum recess radiusra1 max | — | 4 mm | — |
| Maximum recess radiusra1 max | — | 0.157 in | — |
| Product characteristics | |||
| DesignE | — | Increased Capacity Design | — |
| Radial internal clearanceC3 (Group 3) | — | Internal clearance larger than CN | — |
| Tolerance classPN | — | Normal (ISO 492:2023) | — |
| Number of rows1 | — | Single-row design | — |
| Product identity | |||
| Official product category | Cylindrical roller bearings | — | — |
| Official taxonomy path | /products/rolling-bearings/roller-bearings/cylindrical-roller-bearings/single-row-cylindrical-roller-bearings | — | — |
| Structure group ID | BC1_001_101 | — | — |
| Available from SKF | Yes | — | — |
| Remanufacturable | Yes | — | — |
| Product Identity | |||
| Construction | — | Cylindrical roller bearing NU..-E-M1A, with cage, single row, non-locating bearing, 2 ribs on outer ring, 0 ribs on inner ring (smooth), type NU, Running accuracy in P6 | Single Row Cylindrical Roller Bearing | Imperial Series | 12.5984 in Bore | 21.2598 in OD | 6.9291 in Width | Open | Cylindrical Bore | Machined Window Brass Cage | C3 Clearance |
| Short Description | — | Cylindrical roller bearing | — |
| Type Description | — | — | Cylindrical 1-Row |
| Number Of Rows | 1 | — | 1 |
| Tapered Bore | — | — | N |
| Properties | |||
| Bearing part | Complete bearing | — | — |
| Axial displacement capability | In both directions | — | — |
| Locating feature, bearing outer ring | Without | — | — |
| Bore type | Cylindrical | — | — |
| Number of flanges, outer ring | 2 | — | — |
| Number of flanges, inner ring | 0 | — | — |
| Loose flange | None | — | — |
| Radial internal clearance | C3 | — | — |
| Tolerance class | Normal | — | — |
| Coating | Without | — | — |
| Relubrication feature | Without | — | — |
| Candidate for remanufacturing | Yes | — | — |
| Indicative carbon footprint for new product | 625.0 kg CO 2 e | — | — |
| Indicative carbon footprint for remanufactured product | 208.0 kg CO 2 e | — | — |
| Technical Data | |||
| Bore Diameter (D) | — | 320 mm | — |
| Outside Diamater (D) | — | 540 mm | — |
| Total Width (B) | — | 176 mm | — |
| Overall Width | — | — | 0.000 mm |
| Basic Dynamic Load Rating, Radial (Cr) | — | 3,250,000 N | — |
| Radial Rating | — | — | 3,590,000 N |
| Basic Static Load Rating, Radial (C0R) | — | 5,600,000 N | — |
| Axial Rating | — | — | 0 N |
| Raceway Diameter Inner Ring (F) | — | 368 mm | — |
| Dynamic Rating C1 | — | — | 3,590,000 N |
| Operating Temperature Min. (Tmin) | — | -30 °C | — |
| Dynamic Rating C90 | — | — | 0 N |
| Minimum Diameter Shaft Shoulder (Da) | — | 340 mm | — |
| Dynamic Axial Rating Ca90 | — | — | 0 N |
| Operating Temperature Max. (Tmax) | — | 150 °C | — |
| Dynamic Axial Rating Ca1 | — | — | 0 N |
| Limiting Speed (Limiting Spe) | — | 1,800 1/min | — |
| Static Radial Rating C0 | — | — | 5,340,000 N |
| Reference Speed (Nϑr) | — | 690 1/min | — |
| Extended Dynamic Rating Ce | — | — | 0 N |
| Maximum Recess Radius (Ra Max) | — | 4 mm | — |
| Static Axial Rating C0A | — | — | 0 N |
| Maximum Diameter Of Housing Shoulder (Da) | — | 520 mm | — |
| Minimum Chamfer Dimension (R1 Min) | — | 5 mm | — |
| Axial Displacement (S) | — | 12 mm | — |
| Minimum Rib Diameter Outer Ring (D1 Min) | — | 475.4 mm | — |
| Maximum Diameter Of Shaft Shoulder (Da Max) | — | 364 mm | — |
| Maximum Recess Radius (Ra1 Max) | — | 4 mm | — |
| Minimum Chamfer Dimension (Rmin) | — | 5 mm | — |
| Raceway Diameter Outer Ring (E) | — | 496 mm | — |
| Minimum Shaft Shoulder (Db Min) | — | 372 mm | — |
| Fatigue Load Limit, Radial (Cur) | — | 550,000 N | — |
| Temperature range | |||
| Operating temperature min.Tmin | — | -30 °C | — |
| Operating temperature min.Tmin | — | -22 °F | — |
| Operating temperature max.Tmax | — | 150 °C | — |
| Operating temperature max.Tmax | — | 302 °F | — |
Automatic matching is a search aid, not an interchangeability declaration. Confirm the full suffix, tolerances, internal design and application limits before substitution.