Cross-brand designation analysis
COMPARE / VERIFY
Same-model Comparison
Explore products that share a base designation across loaded brands, with dimensional agreement and data gaps shown clearly.
Cross Reference centre · Interchange verification checklist · Understand suffix differences
You entered NU-1996-MA-C3. This table explores the base group NU1996; it does not preserve or approve every requested suffix. Search your complete marking first →
Automatic candidate selection
One base designation across loaded brands
Exact designations rank first. Dimensions, suffixes and other technical differences remain visible so the result is not mistaken for an interchangeability declaration.
Dimensions verified
“NU1996” across 2 loaded brands
At least two brands share the same bore, outside diameter and width. Use Custom Compare when you want to choose exact suffix variants yourself.
Technical comparison
Choose exact variants instead →Brand differences at a glance
| Parameter | SKFNU 1996 MA480 × 650 × 78 mm | FAGNU1996-M1480 × 650 × 78 mm |
|---|---|---|
| Comparable specifications | ||
| Brand | SKF | FAG |
| Designation | NU 1996 MA | NU1996-M1 |
| Product family | Cylindrical roller bearings | — |
| Detailed type | Single row cylindrical roller bearing, nu design | Cylindrical roller bearings |
| Series | — | NU1996 |
| Bore diameterd | 480 mm | 480 mm |
| Outside diameterD | 650 mm | 650 mm |
| WidthB | 78 mm | 78 mm |
| Basic dynamic load ratingC | 1170 kN | 1150 kN |
| Basic static load ratingC0 | 2240 kN | 2250 kN |
| Fatigue load limitPu | 183 kN | 179 kN |
| Reference speednref | 950 r/min | 810 r/min |
| Limiting speednG | 1300 r/min | 1680 r/min |
| Mass≈m | 75.6 kg | 74.2 kg |
| Precision class | — | PN — Normal (ISO 492:2023) |
| Internal clearance | CN | CN (Group N) — Normal internal clearance |
| Sealing | Without | — |
| Cage | Machined brass | M1 — Two Piece Brass Cage Roller Guided |
| Lubricant | None | — |
| Minimum operating temperatureTmin | — | -30 °C |
| Maximum operating temperatureTmax | — | 150 °C |
| Capabilities & suitability | ||
| Radial load capacity | — | Yes |
| Suitable for grease lubrication | — | Yes |
| Suitable for oil lubrication | — | Yes |
| Unsealed design | — | Yes |
| Largebearing | — | Yes |
| Dimensions | ||
| Minimum chamfer dimensionrmin | — | 5 mm |
| Minimum chamfer dimensionrmin | — | 0.197 in |
| Minimum chamfer dimensionr1 min | — | 5 mm |
| Minimum chamfer dimensionr1 min | — | 0.197 in |
| Axial displacements | — | 6.8 mm |
| Axial displacements | — | 0.268 in |
| Raceway diameter outer ringE | — | 605 mm |
| Raceway diameter outer ringE | — | 23.819 in |
| Raceway diameter inner ringF | — | 525 mm |
| Raceway diameter inner ringF | — | 20.669 in |
| Minimum rib diameter outer ringD1 min | — | 589 mm |
| Minimum rib diameter outer ringD1 min | — | 23.189 in |
| Engineering — Abutment dimensions | ||
| Diameter of spacer sleeved a | max. 517 mm | — |
| Diameter of shaft abutmentd b | min. 530 mm | — |
| Diameter of housing abutmentD a | max. 632 mm | — |
| Radius of filletr a | max. 4 mm | — |
| Engineering — Calculation data | ||
| Minimum load factork r | 0.07 | — |
| Limiting valuee | 0.2 | — |
| Calculation factorY | 0 | — |
| Engineering — Dimensions | ||
| Shoulder diameter of outer ringD 1 | ≈ 592 mm | — |
| Raceway diameter of inner ringF | 525 mm | — |
| Chamfer dimensionr 1,2 | min. 5 mm | — |
| Permissible axial displacements | max. 6.5 mm | — |
| Logistics | ||
| Product net weight | 75.6 kg | — |
| eClass code | 23-05-09-01 | — |
| UNSPSC code | 31171505 | — |
| Main Dimensions & Performance Data | ||
| Basic dynamic load rating, radialCr | — | 1,150,000 N |
| Basic dynamic load rating, radialCr | — | 258,543.165 lbf |
| Basic static load rating, radialC0r | — | 2,250,000 N |
| Basic static load rating, radialC0r | — | 505,845.324 lbf |
| Fatigue load limit, radialCur | — | 179,000 N |
| Fatigue load limit, radialCur | — | 40,242.806 lbf |
| Manufacturer Identity | ||
| Schaeffler Product Code | — | 1741004 |
| Base Type | — | NU1996 |
| Product Line Id | — | 12 |
| Base product | — | 2305090102 |
| Bearing X designation | — | NU1996-M1 |
| Mounting Manager ID | — | NU1996-M1 |
| Grease application ID | — | NU1996-M1 |
| Mounting dimensions | ||
| Minimum diameter shaft shoulderda min | — | 497 mm |
| Minimum diameter shaft shoulderda min | — | 19.567 in |
| Maximum diameter of shaft shoulderda max | — | 521 mm |
| Maximum diameter of shaft shoulderda max | — | 20.512 in |
| Minimum shaft shoulderdb min | — | 529 mm |
| Minimum shaft shoulderdb min | — | 20.827 in |
| Maximum diameter of housing shoulderDa max | — | 633 mm |
| Maximum diameter of housing shoulderDa max | — | 24.921 in |
| Maximum recess radiusra max | — | 4 mm |
| Maximum recess radiusra max | — | 0.157 in |
| Maximum recess radiusra1 max | — | 4 mm |
| Maximum recess radiusra1 max | — | 0.157 in |
| Product characteristics | ||
| Design | — | Standard |
| Radial internal clearanceCN (Group N) | — | Normal internal clearance |
| Tolerance classPN | — | Normal (ISO 492:2023) |
| Number of rows1 | — | Single-row design |
| Product identity | ||
| Official product category | Cylindrical roller bearings | — |
| Official taxonomy path | /products/rolling-bearings/roller-bearings/cylindrical-roller-bearings/single-row-cylindrical-roller-bearings | — |
| Structure group ID | BC1_001_101 | — |
| Available from SKF | Yes | — |
| Remanufacturable | Yes | — |
| Product Identity | ||
| Construction | — | Cylindrical roller bearing NU20..-E-XL-M1, with cage, single row, non-locating bearing, 2 ribs on outer ring, 0 ribs on inner ring (smooth), type NU, Running accuracy in P6 |
| Short Description | — | Cylindrical roller bearing |
| Properties | ||
| Bearing part | Complete bearing | — |
| Axial displacement capability | In both directions | — |
| Number of rows | 1 | — |
| Locating feature, bearing outer ring | Without | — |
| Bore type | Cylindrical | — |
| Number of flanges, outer ring | 2 | — |
| Number of flanges, inner ring | 0 | — |
| Loose flange | None | — |
| Radial internal clearance | CN | — |
| Tolerance class | Normal | — |
| Coating | Without | — |
| Relubrication feature | Without | — |
| Candidate for remanufacturing | Yes | — |
| Indicative carbon footprint for new product | 280.0 kg CO 2 e | — |
| Indicative carbon footprint for remanufactured product | 93.0 kg CO 2 e | — |
| Technical Data | ||
| Bore Diameter (D) | — | 480 mm |
| Outside Diamater (D) | — | 650 mm |
| Total Width (B) | — | 78 mm |
| Basic Dynamic Load Rating, Radial (Cr) | — | 1,150,000 N |
| Basic Static Load Rating, Radial (C0R) | — | 2,250,000 N |
| Raceway Diameter Inner Ring (F) | — | 525 mm |
| Operating Temperature Min. (Tmin) | — | -30 °C |
| Minimum Diameter Shaft Shoulder (Da) | — | 497 mm |
| Operating Temperature Max. (Tmax) | — | 150 °C |
| Limiting Speed (Limiting Spe) | — | 1,680 1/min |
| Reference Speed (Nϑr) | — | 810 1/min |
| Maximum Recess Radius (Ra Max) | — | 4 mm |
| Maximum Diameter Of Housing Shoulder (Da) | — | 633 mm |
| Minimum Chamfer Dimension (R1 Min) | — | 5 mm |
| Axial Displacement (S) | — | 6.8 mm |
| Minimum Rib Diameter Outer Ring (D1 Min) | — | 589 mm |
| Maximum Diameter Of Shaft Shoulder (Da Max) | — | 521 mm |
| Maximum Recess Radius (Ra1 Max) | — | 4 mm |
| Minimum Chamfer Dimension (Rmin) | — | 5 mm |
| Raceway Diameter Outer Ring (E) | — | 605 mm |
| Minimum Shaft Shoulder (Db Min) | — | 529 mm |
| Fatigue Load Limit, Radial (Cur) | — | 179,000 N |
| Temperature range | ||
| Operating temperature min.Tmin | — | -30 °C |
| Operating temperature min.Tmin | — | -22 °F |
| Operating temperature max.Tmax | — | 150 °C |
| Operating temperature max.Tmax | — | 302 °F |
Automatic matching is a search aid, not an interchangeability declaration. Confirm the full suffix, tolerances, internal design and application limits before substitution.