Cross-brand designation analysis
COMPARE / VERIFY
Same-model Comparison
Explore products that share a base designation across loaded brands, with dimensional agreement and data gaps shown clearly.
Cross Reference centre · Interchange verification checklist · Understand suffix differences
You entered NU-19-630-ECMA-HB1. This table explores the base group NU19; it does not preserve or approve every requested suffix. Search your complete marking first →
Automatic candidate selection
One base designation across loaded brands
Exact designations rank first. Dimensions, suffixes and other technical differences remain visible so the result is not mistaken for an interchangeability declaration.
Dimensions verified
“NU19” across 3 loaded brands
At least two brands share the same bore, outside diameter and width. Use Custom Compare when you want to choose exact suffix variants yourself.
Technical comparison
Choose exact variants instead →Brand differences at a glance
| Parameter | SKFNU 19/560 ECMA560 × 750 × 85 mm | FAGNU19/560-M1560 × 750 × 85 mm | TIMKENNU19/560EMA560 × 750 × 85 mm |
|---|---|---|---|
| Comparable specifications | |||
| Brand | SKF | FAG | TIMKEN |
| Designation | NU 19/560 ECMA | NU19/560-M1 | NU19/560EMA |
| Product family | Cylindrical roller bearings | — | Cylindrical 1-Row |
| Detailed type | Single row cylindrical roller bearing, nu design | Cylindrical roller bearings | Cylindrical roller bearings |
| Series | — | NU19/560 | NCS-421318 |
| Bore diameterd | 560 mm | 560 mm | 560 mm |
| Outside diameterD | 750 mm | 750 mm | 750 mm |
| WidthB | 85 mm | 85 mm | 85 mm |
| Basic dynamic load ratingC | 1760 kN | 1460 kN | 1970 kN |
| Basic static load ratingC0 | 3400 kN | 2950 kN | 3430 kN |
| Fatigue load limitPu | 250 kN | 227 kN | — |
| Reference speednref | 800 r/min | 660 r/min | — |
| Limiting speednG | 1000 r/min | 1450 r/min | — |
| Mass≈m | 112 kg | 102.35 kg | 105 kg |
| Precision class | — | PN — Normal (ISO 492:2023) | — |
| Internal clearance | CN | CN (Group N) — Normal internal clearance | — |
| Sealing | Without | — | Open |
| Cage | Machined brass | M1 — Two Piece Brass Cage Roller Guided | Window Brass cage |
| Lubricant | None | — | — |
| Minimum operating temperatureTmin | — | -30 °C | — |
| Maximum operating temperatureTmax | — | 150 °C | — |
| Calculation Factors | |||
| K Factor | — | — | 0.00 |
| Y1 Factor | — | — | 0.00 |
| Y2 Factor | — | — | 0.00 |
| Y0 Factor | — | — | 0.00 |
| E Factor | — | — | 0.00 |
| Cg Factor | — | — | 0.2568 |
| Capabilities & suitability | |||
| Radial load capacity | — | Yes | — |
| Suitable for grease lubrication | — | Yes | — |
| Suitable for oil lubrication | — | Yes | — |
| Unsealed design | — | Yes | — |
| Largebearing | — | Yes | — |
| Dimensions | |||
| Minimum chamfer dimensionrmin | — | 5 mm | — |
| Minimum chamfer dimensionrmin | — | 0.197 in | — |
| Minimum chamfer dimensionr1 min | — | 5 mm | — |
| Minimum chamfer dimensionr1 min | — | 0.197 in | — |
| Axial displacements | — | 9.6 mm | — |
| Axial displacements | — | 0.378 in | — |
| Raceway diameter outer ringE | — | 700 mm | — |
| Raceway diameter outer ringE | — | 27.559 in | — |
| Raceway diameter inner ringF | — | 610 mm | — |
| Raceway diameter inner ringF | — | 24.016 in | — |
| Minimum rib diameter outer ringD1 min | — | 682 mm | — |
| Minimum rib diameter outer ringD1 min | — | 26.85 in | — |
| Engineering — Abutment dimensions | |||
| Diameter of spacer sleeved a | max. 600 mm | — | — |
| Diameter of shaft abutmentd b | min. 613 mm | — | — |
| Diameter of housing abutmentD a | max. 732 mm | — | — |
| Radius of filletr a | max. 4 mm | — | — |
| Engineering — Calculation data | |||
| Minimum load factork r | 0.11 | — | — |
| Limiting valuee | 0.2 | — | — |
| Calculation factorY | 0.6 | — | — |
| Engineering — Dimensions | |||
| Shoulder diameter of outer ringD 1 | ≈ 693 mm | — | — |
| Raceway diameter of inner ringF | 607 mm | — | — |
| Chamfer dimensionr 1,2 | min. 5 mm | — | — |
| Permissible axial displacements | max. 2.7 mm | — | — |
| Logistics | |||
| Product net weight | 112.0 kg | — | — |
| eClass code | 23-05-09-01 | — | — |
| UNSPSC code | 31171505 | — | — |
| Main Dimensions & Performance Data | |||
| Basic dynamic load rating, radialCr | — | 1,460,000 N | — |
| Basic dynamic load rating, radialCr | — | 328,237.41 lbf | — |
| Basic static load rating, radialC0r | — | 2,950,000 N | — |
| Basic static load rating, radialC0r | — | 663,219.424 lbf | — |
| Fatigue load limit, radialCur | — | 227,000 N | — |
| Fatigue load limit, radialCur | — | 51,034.173 lbf | — |
| Manufacturer Identity | |||
| Schaeffler Product Code | — | 369882 | — |
| Material Number | — | — | 000000000190072729 |
| Base Type | — | NU19/560 | — |
| World Assembly Part Number | — | — | NU19/560EMA |
| Gpsd Group | — | F01 | — |
| Inner Ring Part Number | — | — | 560ARUE19 |
| Product Line Id | — | 75 | — |
| Outer Ring Part Number | — | — | 560ERUE19 |
| Drawing Number | — | — | M962373 |
| Upc | — | — | 0085706324858 |
| Official Source System | — | — | CORE BP - DS DF |
| Official Last Run | — | — | 2026-08-23T20:02:48.513 |
| SAP material number | — | 0219413350000 | — |
| Base product | — | 2305090102 | — |
| Bearing X designation | — | NU19/560-M1 | — |
| Mounting Manager ID | — | NU19/560-M1 | — |
| Grease application ID | — | NU19/560-M1 | — |
| Mounting dimensions | |||
| Minimum diameter shaft shoulderda min | — | 577 mm | — |
| Minimum diameter shaft shoulderda min | — | 22.717 in | — |
| Maximum diameter of shaft shoulderda max | — | 606 mm | — |
| Maximum diameter of shaft shoulderda max | — | 23.858 in | — |
| Minimum shaft shoulderdb min | — | 614 mm | — |
| Minimum shaft shoulderdb min | — | 24.173 in | — |
| Maximum diameter of housing shoulderDa max | — | 733 mm | — |
| Maximum diameter of housing shoulderDa max | — | 28.858 in | — |
| Maximum recess radiusra max | — | 4 mm | — |
| Maximum recess radiusra max | — | 0.157 in | — |
| Maximum recess radiusra1 max | — | 4 mm | — |
| Maximum recess radiusra1 max | — | 0.157 in | — |
| Product characteristics | |||
| Design | — | Standard | — |
| Radial internal clearanceCN (Group N) | — | Normal internal clearance | — |
| Tolerance classPN | — | Normal (ISO 492:2023) | — |
| Number of rows1 | — | Single-row design | — |
| Product identity | |||
| Official product category | Cylindrical roller bearings | — | — |
| Official taxonomy path | /products/rolling-bearings/roller-bearings/cylindrical-roller-bearings/single-row-cylindrical-roller-bearings | — | — |
| Structure group ID | BC1_001_101 | — | — |
| Available from SKF | Yes | — | — |
| Remanufacturable | Yes | — | — |
| Product Identity | |||
| Construction | — | Cylindrical roller bearing NU20..-E-XL-M1, with cage, single row, non-locating bearing, 2 ribs on outer ring, 0 ribs on inner ring (smooth), type NU, Running accuracy in P6 | Single Row Cylindrical Roller Bearing | Imperial Series | 22.0472 in Bore | 29.5276 in OD | 3.3465 in Width | Open | Cylindrical Bore | Machined Window Brass Cage | C0 Clearance |
| Short Description | — | Cylindrical roller bearing | — |
| Type Description | — | — | Cylindrical 1-Row |
| Number Of Rows | 1 | — | 1 |
| Tapered Bore | — | — | N |
| Properties | |||
| Bearing part | Complete bearing | — | — |
| Axial displacement capability | In both directions | — | — |
| Locating feature, bearing outer ring | Without | — | — |
| Bore type | Cylindrical | — | — |
| Number of flanges, outer ring | 2 | — | — |
| Number of flanges, inner ring | 0 | — | — |
| Loose flange | None | — | — |
| Radial internal clearance | CN | — | — |
| Tolerance class | Normal | — | — |
| Coating | Without | — | — |
| Relubrication feature | Without | — | — |
| Candidate for remanufacturing | Yes | — | — |
| Indicative carbon footprint for new product | 413.0 kg CO 2 e | — | — |
| Indicative carbon footprint for remanufactured product | 137.0 kg CO 2 e | — | — |
| Technical Data | |||
| Bore Diameter (D) | — | 560 mm | — |
| Outside Diamater (D) | — | 750 mm | — |
| Total Width (B) | — | 85 mm | — |
| Overall Width | — | — | 0.000 mm |
| Basic Dynamic Load Rating, Radial (Cr) | — | 1,460,000 N | — |
| Radial Rating | — | — | 1,970,000 N |
| Basic Static Load Rating, Radial (C0R) | — | 2,950,000 N | — |
| Axial Rating | — | — | 0 N |
| Raceway Diameter Inner Ring (F) | — | 610 mm | — |
| Dynamic Rating C1 | — | — | 1,970,000 N |
| Operating Temperature Min. (Tmin) | — | -30 °C | — |
| Dynamic Rating C90 | — | — | 0 N |
| Minimum Diameter Shaft Shoulder (Da) | — | 577 mm | — |
| Dynamic Axial Rating Ca90 | — | — | 0 N |
| Operating Temperature Max. (Tmax) | — | 150 °C | — |
| Dynamic Axial Rating Ca1 | — | — | 0 N |
| Limiting Speed (Limiting Spe) | — | 1,450 1/min | — |
| Static Radial Rating C0 | — | — | 3,430,000 N |
| Reference Speed (Nϑr) | — | 660 1/min | — |
| Extended Dynamic Rating Ce | — | — | 0 N |
| Maximum Recess Radius (Ra Max) | — | 4 mm | — |
| Static Axial Rating C0A | — | — | 0 N |
| Maximum Diameter Of Housing Shoulder (Da) | — | 733 mm | — |
| Minimum Chamfer Dimension (R1 Min) | — | 5 mm | — |
| Axial Displacement (S) | — | 9.6 mm | — |
| Minimum Rib Diameter Outer Ring (D1 Min) | — | 682 mm | — |
| Maximum Diameter Of Shaft Shoulder (Da Max) | — | 606 mm | — |
| Maximum Recess Radius (Ra1 Max) | — | 4 mm | — |
| Minimum Chamfer Dimension (Rmin) | — | 5 mm | — |
| Raceway Diameter Outer Ring (E) | — | 700 mm | — |
| Minimum Shaft Shoulder (Db Min) | — | 614 mm | — |
| Fatigue Load Limit, Radial (Cur) | — | 227,000 N | — |
| Temperature range | |||
| Operating temperature min.Tmin | — | -30 °C | — |
| Operating temperature min.Tmin | — | -22 °F | — |
| Operating temperature max.Tmax | — | 150 °C | — |
| Operating temperature max.Tmax | — | 302 °F | — |
Automatic matching is a search aid, not an interchangeability declaration. Confirm the full suffix, tolerances, internal design and application limits before substitution.