Cross-brand designation analysis
COMPARE / VERIFY
Same-model Comparison
Explore products that share a base designation across loaded brands, with dimensional agreement and data gaps shown clearly.
Cross Reference centre · Interchange verification checklist · Understand suffix differences
You entered NU-1032-ML-C4H. This table explores the base group NU1032; it does not preserve or approve every requested suffix. Search your complete marking first →
Automatic candidate selection
One base designation across loaded brands
Exact designations rank first. Dimensions, suffixes and other technical differences remain visible so the result is not mistaken for an interchangeability declaration.
Dimensions verified
“NU1032” across 5 loaded brands
At least two brands share the same bore, outside diameter and width. Use Custom Compare when you want to choose exact suffix variants yourself.
Technical comparison
Choose exact variants instead →Brand differences at a glance
| Parameter | SKFNU 1032 M160 × 240 × 38 mm | FAGNU1032-XL-M1160 × 240 × 38 mm | TIMKENNU1032MA160 × 240 × 38 mm | NSKNU1032160 × 240 × 38 mm | KOYONU1032160 × 240 × 38 mm |
|---|---|---|---|---|---|
| Comparable specifications | |||||
| Brand | SKF | FAG | TIMKEN | NSK | KOYO |
| Designation | NU 1032 M | NU1032-XL-M1 | NU1032MA | NU1032 | NU1032 |
| Product family | Cylindrical roller bearings | — | Cylindrical 1-Row | Cylindrical roller bearing | Single-row / NU |
| Detailed type | Single row cylindrical roller bearing, nu design | Cylindrical roller bearings | Cylindrical roller bearings | Cylindrical roller bearings | Cylindrical roller bearings |
| Series | — | NU1032 | EX27545 | — | — |
| Bore diameterd | 160 mm | 160 mm | 160 mm | 160 mm | 160 mm |
| Outside diameterD | 240 mm | 240 mm | 240 mm | 240 mm | 240 mm |
| WidthB | 38 mm | 38 mm | 38 mm | 38 mm | 38 mm |
| Basic dynamic load ratingC | 265 kN | 290 kN | 276 kN | 292 kN | 297 kN |
| Basic static load ratingC0 | 325 kN | 355 kN | 367 kN | 340 kN | 330 kN |
| Fatigue load limitPu | — | 44 kN | — | — | 42.8 kN |
| Reference speednref | 3000 r/min | 3000 r/min | — | — | — |
| Limiting speednG | 3000 r/min | 5400 r/min | — | — | 2600 r/min |
| Mass≈m | 5.97 kg | 5.805 kg | 5.9 kg | — | 5.93 kg |
| Precision class | — | PN — Normal (ISO 492:2023) | — | — | — |
| Internal clearance | CN | CN (Group N) — Normal internal clearance | — | — | — |
| Sealing | Without | — | Open | — | — |
| Cage | Machined brass | M1 — Two Piece Brass Cage Roller Guided | Window Brass cage | Machined brass | — |
| Lubricant | None | — | — | — | — |
| Minimum operating temperatureTmin | — | -30 °C | — | — | — |
| Maximum operating temperatureTmax | — | 150 °C | — | — | — |
| Boundary dimensions | |||||
| Bearing widthB | — | — | — | 38 mm | — |
| Minimum bearing chamferr min. | — | — | — | 2.1 mm | — |
| Minimum secondary bearing chamferr1 min. | — | — | — | 1.5 mm | — |
| Roller inscribed circle diameterFw | — | — | — | 180 mm | — |
| Calculation Factors | |||||
| K Factor | — | — | 0.00 | — | — |
| Y1 Factor | — | — | 0.00 | — | — |
| Y2 Factor | — | — | 0.00 | — | — |
| Y0 Factor | — | — | 0.00 | — | — |
| E Factor | — | — | 0.00 | — | — |
| Cg Factor | — | — | 0.1187 | — | — |
| Capabilities & suitability | |||||
| Radial load capacity | — | Yes | — | — | — |
| Suitable for grease lubrication | — | Yes | — | — | — |
| Suitable for oil lubrication | — | Yes | — | — | — |
| Unsealed design | — | Yes | — | — | — |
| Catalogue reference mass | |||||
| Approximate shared-row mass — not separately stated for each rib arrangement | — | — | — | 5.81 kg | — |
| Classification | |||||
| Official Category Path | — | — | — | — | Cylindrical roller bearings - Single-row - NU |
| Official Classification 1 | — | — | — | — | Cylindrical roller bearings / Single-row / NU |
| Construction | |||||
| Single-row construction type | — | — | — | NU | — |
| Rib arrangement | — | — | — | Two outer-ring ribs; ribless inner ring | — |
| Standard cage material | — | — | — | Machined brass | — |
| Standard cage marking | — | — | — | M is usually omitted for this series | — |
| Other cage codes listed for this catalogue row | — | — | — | None listed in this row | — |
| Precision — designation omission rule | — | — | — | ISO Normal when no precision suffix is specified | — |
| Clearance identification — verify interchangeability | — | — | — | No clearance suffix shown. CN omission applies to interchangeable designs; do not infer a numerical clearance. | — |
| Optimized crowning note | — | — | — | No optimized-crowning asterisk on this row | — |
| Dimensions | |||||
| Minimum chamfer dimensionrmin | — | 2.1 mm | — | — | — |
| Minimum chamfer dimensionrmin | — | 0.083 in | — | — | — |
| Minimum chamfer dimensionr1 min | — | 1.5 mm | — | — | — |
| Minimum chamfer dimensionr1 min | — | 0.059 in | — | — | — |
| Axial displacements | — | 4.3 mm | — | — | — |
| Axial displacements | — | 0.169 in | — | — | — |
| Raceway diameter outer ringE | — | 220 mm | — | — | — |
| Raceway diameter outer ringE | — | 8.661 in | — | — | — |
| Raceway diameter inner ringF | — | 180 mm | — | — | — |
| Raceway diameter inner ringF | — | 7.087 in | — | — | — |
| Minimum rib diameter outer ringD1 min | — | 212.9 mm | — | — | — |
| Minimum rib diameter outer ringD1 min | — | 8.382 in | — | — | — |
| Load ratings — standard cage | |||||
| Basic dynamic radial load ratingCr | — | — | — | 292000 N | — |
| Basic static radial load ratingC0r | — | — | — | 340000 N | — |
| Logistics | |||||
| Product net weight | 5.97 kg | — | — | — | — |
| eClass code | 23-05-09-01 | — | — | — | — |
| Lubrication-qualified speed — standard cage | |||||
| Thermal speed rating — oil bath | — | — | — | 3400 r/min | — |
| Mechanical limiting speed — forced oil circulation | — | — | — | Not stated in this catalogue row | — |
| Limiting speed — grease | — | — | — | 2600 r/min | — |
| Limiting speed — oil bath | — | — | — | 3200 r/min | — |
| Main Dimensions & Performance Data | |||||
| Basic dynamic load rating, radialCr | — | 290,000 N | — | — | — |
| Basic dynamic load rating, radialCr | — | 65,197.842 lbf | — | — | — |
| Basic static load rating, radialC0r | — | 355,000 N | — | — | — |
| Basic static load rating, radialC0r | — | 79,811.151 lbf | — | — | — |
| Fatigue load limit, radialCur | — | 44,000 N | — | — | — |
| Fatigue load limit, radialCur | — | 9,892.086 lbf | — | — | — |
| Manufacturer Identity | |||||
| Schaeffler Product Code | — | 369327 | — | — | — |
| Material Number | — | — | 000000000190008823 | — | — |
| Official Class Key | — | — | — | — | 040-010-000 |
| Base Type | — | NU1032 | — | — | — |
| World Assembly Part Number | — | — | NU1032MA | — | — |
| Old Designation | — | ["NU1032-M1"] | — | — | — |
| Inner Ring Part Number | — | — | 160ARUA10 | — | — |
| Gpsd Group | — | F01 | — | — | — |
| Outer Ring Part Number | — | — | 160ERUA10 | — | — |
| Product Line Id | — | 63 | — | — | — |
| Drawing Number | — | — | M99765 | — | — |
| X Life Marking | — | XL | — | — | — |
| Upc | — | — | 0053893773377 | — | — |
| Official Source System | — | — | CORE BP - DS DF | — | — |
| Official Last Run | — | — | 2026-08-23T20:02:46.143 | — | — |
| SAP material number | — | 0167373180000 | — | — | — |
| Base product | — | 2305090102 | — | — | — |
| Bearing X designation | — | NU1032-XL-M1 | — | — | — |
| Mounting Manager ID | — | NU1032-XL-M1 | — | — | — |
| Grease application ID | — | NU1032-XL-M1 | — | — | — |
| Mounting dimensions | |||||
| Minimum diameter shaft shoulderda min | — | 168 mm | — | — | — |
| Minimum diameter shaft shoulderda min | — | 6.614 in | — | — | — |
| Maximum diameter of shaft shoulderda max | — | 178 mm | — | — | — |
| Maximum diameter of shaft shoulderda max | — | 7.008 in | — | — | — |
| Minimum shaft shoulderdb min | — | 184 mm | — | — | — |
| Minimum shaft shoulderdb min | — | 7.244 in | — | — | — |
| Maximum diameter of housing shoulderDa max | — | 230 mm | — | — | — |
| Maximum diameter of housing shoulderDa max | — | 9.055 in | — | — | — |
| Maximum recess radiusra max | — | 2.1 mm | — | — | — |
| Maximum recess radiusra max | — | 0.083 in | — | — | — |
| Maximum recess radiusra1 max | — | 1.5 mm | — | — | — |
| Maximum recess radiusra1 max | — | 0.059 in | — | — | — |
| Mounting dimensions — shown arrangement | |||||
| Minimum shaft shoulder diameterdb min. | — | — | — | 168 mm | — |
| Maximum housing shoulder diameterDa max. | — | — | — | 229 mm | — |
| Maximum adjusting-ring diameter (NU/NJ arrangement)db max. | — | — | — | 178 mm | — |
| Maximum adjacent fillet radiusra max. | — | — | — | 2 mm | — |
| Maximum secondary adjacent fillet radiusrb max. | — | — | — | 1.5 mm | — |
| Performance | |||||
| SKF performance class | SKF Explorer | — | — | — | — |
| Product characteristics | |||||
| Design | — | Standard | — | — | — |
| Radial internal clearanceCN (Group N) | — | Normal internal clearance | — | — | — |
| Tolerance classPN | — | Normal (ISO 492:2023) | — | — | — |
| Number of rows1 | — | Single-row design | — | — | — |
| Product identity | |||||
| Official product category | Cylindrical roller bearings | — | — | — | — |
| Official taxonomy path | /products/rolling-bearings/roller-bearings/cylindrical-roller-bearings/single-row-cylindrical-roller-bearings | — | — | — | — |
| Available from SKF | Yes | — | — | — | — |
| Remanufacturable | No | — | — | — | — |
| Product Identity | |||||
| Construction | — | Cylindrical roller bearing NU..-XL-M1, with cage, single row, non-locating bearing, 2 ribs on outer ring, 0 ribs on inner ring (smooth), type NU, Running accuracy in P6 | Single Row Cylindrical Roller Bearing | Imperial Series | 6.2992 in Bore | 9.4488 in OD | 1.4961 in Width | Open | Cylindrical Bore | Machined Window Brass Cage | C0 Clearance | — | — |
| Type Description | — | — | Cylindrical 1-Row | — | — |
| Short Description | — | Cylindrical roller bearing | — | — | — |
| Number Of Rows | 1 | — | 1 | — | — |
| Tapered Bore | — | — | N | — | — |
| Properties | |||||
| Bearing part | Complete bearing | — | — | — | — |
| Axial displacement capability | In both directions | — | — | — | — |
| Locating feature, bearing outer ring | Without | — | — | — | — |
| Bore type | Cylindrical | — | — | — | — |
| Number of flanges, outer ring | 2 | — | — | — | — |
| Number of flanges, inner ring | 0 | — | — | — | — |
| Loose flange | None | — | — | — | — |
| Radial internal clearance | CN | — | — | — | — |
| Tolerance class | Normal | — | — | — | — |
| Coating | Without | — | — | — | — |
| Relubrication feature | Without | — | — | — | — |
| Indicative carbon footprint for new product | 22.1 kg CO 2 e | — | — | — | — |
| Technical Data | |||||
| d | — | — | — | — | 240 mm |
| B | — | — | — | — | 38 mm |
| R(Min.) | — | — | — | — | 2.1 mm |
| R1(Min.) | — | — | — | — | 1.5 mm |
| Bore Diameter (D) | — | 160 mm | — | — | — |
| Overall Width | — | — | 0.000 mm | — | — |
| Fw | — | — | — | — | 180 mm |
| Outside Diamater (D) | — | 240 mm | — | — | — |
| Radial Rating | — | — | 276,000 N | — | — |
| Ew | — | — | — | — | - mm |
| Total Width (B) | — | 38 mm | — | — | — |
| Axial Rating | — | — | 0 N | — | — |
| Basic Load Ratings : Cr | — | — | — | — | 297 kN |
| Basic Dynamic Load Rating, Radial (Cr) | — | 290,000 N | — | — | — |
| Dynamic Rating C1 | — | — | 276,000 N | — | — |
| Basic Load Ratings : C0R | — | — | — | — | 330 kN |
| Basic Static Load Rating, Radial (C0R) | — | 355,000 N | — | — | — |
| Dynamic Rating C90 | — | — | 0 N | — | — |
| Fatigue Load Limit : Cu | — | — | — | — | 42.8 kN |
| Raceway Diameter Inner Ring (F) | — | 180 mm | — | — | — |
| Dynamic Axial Rating Ca90 | — | — | 0 N | — | — |
| Limiting Speeds(Grease Lub.) | — | — | — | — | 2600 min-1 |
| Operating Temperature Min. (Tmin) | — | -30 °C | — | — | — |
| Dynamic Axial Rating Ca1 | — | — | 0 N | — | — |
| Limiting Speeds(Oil Lub.) | — | — | — | — | 3000 min-1 |
| Minimum Diameter Shaft Shoulder (Da) | — | 168 mm | — | — | — |
| Static Radial Rating C0 | — | — | 367,000 N | — | — |
| Sd1 | — | — | — | — | - mm |
| Operating Temperature Max. (Tmax) | — | 150 °C | — | — | — |
| Extended Dynamic Rating Ce | — | — | 0 N | — | — |
| B1 | — | — | — | — | - mm |
| Limiting Speed (Limiting Spe) | — | 5,400 1/min | — | — | — |
| Static Axial Rating C0A | — | — | 0 N | — | — |
| B2 | — | — | — | — | - mm |
| Reference Speed (Nϑr) | — | 3,000 1/min | — | — | — |
| Da(Min.) | — | — | — | — | - mm |
| Maximum Recess Radius (Ra Max) | — | 2.1 mm | — | — | — |
| Db(Min.) | — | — | — | — | - mm |
| Maximum Diameter Of Housing Shoulder (Da) | — | 230 mm | — | — | — |
| Db(Max.) | — | — | — | — | - mm |
| Minimum Chamfer Dimension (R1 Min) | — | 1.5 mm | — | — | — |
| Dc(Min.) | — | — | — | — | - mm |
| Axial Displacement (S) | — | 4.3 mm | — | — | — |
| Dd(Min.) | — | — | — | — | - mm |
| Minimum Rib Diameter Outer Ring (D1 Min) | — | 212.9 mm | — | — | — |
| Da(Max.) | — | — | — | — | 229 mm |
| Maximum Diameter Of Shaft Shoulder (Da Max) | — | 178 mm | — | — | — |
| Maximum Recess Radius (Ra1 Max) | — | 1.5 mm | — | — | — |
| Minimum Chamfer Dimension (Rmin) | — | 2.1 mm | — | — | — |
| Ra(Max.) | — | — | — | — | 2 mm |
| Raceway Diameter Outer Ring (E) | — | 220 mm | — | — | — |
| Rb(Max.) | — | — | — | — | 1.5 mm |
| Minimum Shaft Shoulder (Db Min) | — | 184 mm | — | — | — |
| Mass(Refer.) | — | — | — | — | 5.93 kg |
| Fatigue Load Limit, Radial (Cur) | — | 44,000 N | — | — | — |
| Temperature range | |||||
| Operating temperature min.Tmin | — | -30 °C | — | — | — |
| Operating temperature min.Tmin | — | -22 °F | — | — | — |
| Operating temperature max.Tmax | — | 150 °C | — | — | — |
| Operating temperature max.Tmax | — | 302 °F | — | — | — |
Automatic matching is a search aid, not an interchangeability declaration. Confirm the full suffix, tolerances, internal design and application limits before substitution.