Cross-brand designation analysis
COMPARE / VERIFY
Same-model Comparison
Explore products that share a base designation across loaded brands, with dimensional agreement and data gaps shown clearly.
Cross Reference centre · Interchange verification checklist · Understand suffix differences
You entered NN3084-AS-K-M-SP. This table explores the base group NN3084; it does not preserve or approve every requested suffix. Search your complete marking first →
Automatic candidate selection
One base designation across loaded brands
Exact designations rank first. Dimensions, suffixes and other technical differences remain visible so the result is not mistaken for an interchangeability declaration.
Dimensions verified
“NN3084” across 2 loaded brands
At least two brands share the same bore, outside diameter and width. Use Custom Compare when you want to choose exact suffix variants yourself.
Technical comparison
Choose exact variants instead →Brand differences at a glance
| Parameter | FAGNN3084-AS-K-M-SP420 × 620 × 150 mm | KOYONN3084420 × 620 × 150 mm |
|---|---|---|
| Comparable specifications | ||
| Brand | FAG | KOYO |
| Designation | NN3084-AS-K-M-SP | NN3084 |
| Product family | — | Single-row / NN / Cylindrical bore |
| Detailed type | Cylindrical roller bearings | Cylindrical roller bearings |
| Series | NN3084 | — |
| Bore diameterd | 420 mm | 420 mm |
| Outside diameterD | 620 mm | 620 mm |
| WidthB | 150 mm | 150 mm |
| Basic dynamic load ratingC | 2140 kN | 2900 kN |
| Basic static load ratingC0 | 4450 kN | 4570 kN |
| Fatigue load limitPu | 440 kN | 449 kN |
| Limiting speednG | — | 670 r/min |
| Mass≈m | 150 kg | 154 kg |
| Precision class | SP — Tolerance class SP | — |
| Internal clearance | C1 (Group 1) — Internal clearance smaller than C2 | — |
| Cage | M — Brass Cage | — |
| Minimum operating temperatureTmin | -30 °C | — |
| Maximum operating temperatureTmax | 150 °C | — |
| Capabilities & suitability | ||
| Radial load capacity | Yes | — |
| Suitable for grease lubrication | Yes | — |
| Suitable for oil lubrication | Yes | — |
| Unsealed design | Yes | — |
| Largebearing | Yes | — |
| Classification | ||
| Official Category Path | — | Cylindrical roller bearings - Single-row - NN - Cylindrical bore |
| Official Classification 1 | — | Cylindrical roller bearings / Single-row / NN / Cylindrical bore |
| Dimensions | ||
| Minimum chamfer dimensionr1 min | 5 mm | — |
| Minimum chamfer dimensionr1 min | 0.197 in | — |
| Raceway diameter outer ringE | 569 mm | — |
| Raceway diameter outer ringE | 22.402 in | — |
| Width of lubricating groovens | 17.7 mm | — |
| Width of lubricating groovens | 0.697 in | — |
| Diameter lubrication holeds | 9.5 mm | — |
| Diameter lubrication holeds | 0.374 in | — |
| Axial displacements | 10 mm | — |
| Axial displacements | 0.394 in | — |
| Main Dimensions & Performance Data | ||
| Basic dynamic load rating, radialCr | 2,140,000 N | — |
| Basic dynamic load rating, radialCr | 481,115.108 lbf | — |
| Basic static load rating, radialC0r | 4,450,000 N | — |
| Basic static load rating, radialC0r | 1,000,449.64 lbf | — |
| Fatigue load limit, radialCur | 440,000 N | — |
| Fatigue load limit, radialCur | 98,920.863 lbf | — |
| Limiting speed for grease lubricationnG Grease | 1,220 1/min | — |
| Limiting speed for oil lubricationnG Oil | 1,440 1/min | — |
| Manufacturer Identity | ||
| Schaeffler Product Code | 374924 | — |
| Official Class Key | — | 040-020-010 |
| Base Type | NN3084 | — |
| Gpsd Group | F07 | — |
| Product Line Id | 39 | — |
| X Life Marking | n.r. | — |
| SAP material number | 0192317410000 | — |
| Base product | 230509014D | — |
| Bearing X designation | NN3084-AS-K-M-SP | — |
| Mounting Manager ID | NN3084-AS-K-M-SP | — |
| Mounting dimensions | ||
| Diameter shaft shoulderda | 479 mm | — |
| Diameter shaft shoulderda | 18.858 in | — |
| Diameter shaft shoulder tolerance | h12 | — |
| Diameter of housing shoulderDa | 580 mm | — |
| Diameter of housing shoulderDa | 22.835 in | — |
| Shoulder diameter outer ring clearance | H12 | — |
| Maximum recess radiusra1 max | 4 mm | — |
| Maximum recess radiusra1 max | 0.157 in | — |
| Product characteristics | ||
| Tolerance classSP | Tolerance class SP | — |
| Bore typeK | Tapered, taper 1:12 | — |
| Change markA | Internal Variant A | — |
| Radial internal clearanceC1 (Group 1) | Internal clearance smaller than C2 | — |
| Number of rows2 | Double-row design | — |
| Product Identity | ||
| Construction | Super precision cylindrical roller bearings NN30..-AS-K-M-SP, non-locating bearing, double row, with tapered bore, taper 1:12, separable, with cage | — |
| Short Description | Cylindrical roller bearing | — |
| Technical Data | ||
| d | — | 620 mm |
| B | — | 150 mm |
| R(Min.) | — | 5 mm |
| Bore Diameter (D) | 420 mm | — |
| Fw | — | - mm |
| Outside Diamater (D) | 620 mm | — |
| Ew | — | 570 mm |
| Total Width (B) | 150 mm | — |
| Basic Load Ratings : Cr | — | 2900 kN |
| Basic Dynamic Load Rating, Radial (Cr) | 2,140,000 N | — |
| Basic Load Ratings : C0R | — | 4570 kN |
| Basic Static Load Rating, Radial (C0R) | 4,450,000 N | — |
| Fatigue Load Limit : Cu | — | 449 kN |
| Diameter Lubrication Hole (Ds) | 9.5 mm | — |
| Limiting Speeds(Grease Lub.) | — | 670 min-1 |
| Operating Temperature Min. (Tmin) | -30 °C | — |
| Limiting Speeds(Oil Lub.) | — | 800 min-1 |
| Limiting Speed For Grease Lubrication (Ng Grea) | 1,220 1/min | — |
| Da(Min.) | — | 574 mm |
| Minimum Diameter Shaft Shoulder (Da) | 479 mm | — |
| Da(Max.) | — | 600 mm |
| Limiting Speed (Ng Oil) | 1,440 1/min | — |
| Db(Min.) | — | - mm |
| Operating Temperature Max. (Tmax) | 150 °C | — |
| Maximum Diameter Of Housing Shoulder (Da) | 580 mm | — |
| Ra(Max.) | — | 4 mm |
| Minimum Chamfer Dimension (R1 Min) | 5 mm | — |
| Mass(Refer.) | — | 154 kg |
| Width Of Lubricating Groove (Ns) | 17.7 mm | — |
| Axial Displacement (S) | 10 mm | — |
| Maximum Recess Radius (Ra1 Max) | 4 mm | — |
| Raceway Diameter Outer Ring (E) | 569 mm | — |
| Fatigue Load Limit, Radial (Cur) | 440,000 N | — |
| Temperature range | ||
| Operating temperature min.Tmin | -30 °C | — |
| Operating temperature min.Tmin | -22 °F | — |
| Operating temperature max.Tmax | 150 °C | — |
| Operating temperature max.Tmax | 302 °F | — |
Automatic matching is a search aid, not an interchangeability declaration. Confirm the full suffix, tolerances, internal design and application limits before substitution.