Same-model Comparison
Explore products that share a base designation across loaded brands, with dimensional agreement and data gaps shown clearly.
Cross Reference centre · Interchange verification checklist · Understand suffix differences
You entered NKIA5905-XL. This table explores the base group NKIA5905; it does not preserve or approve every requested suffix. Search your complete marking first →
One base designation across loaded brands
Exact designations rank first. Dimensions, suffixes and other technical differences remain visible so the result is not mistaken for an interchangeability declaration.
“NKIA5905” across 2 loaded brands
At least two brands share the same bore, outside diameter and width. Use Custom Compare when you want to choose exact suffix variants yourself.
Brand differences at a glance
| Parameter | SKFNKIA 590525 × 42 × 23 mm | INANKIA5905-XL25 × 42 × 23 mm |
|---|---|---|
| Comparable specifications | ||
| Brand | SKF | INA |
| Designation | NKIA 5905 | NKIA5905-XL |
| Product family | Combined needle roller / angular contact ball bearings | — |
| Detailed type | Combined needle roller / angular contact ball bearing for axial loads in one direction | Needle roller/angular contact ball bearing |
| Series | — | NKIA5905 |
| Bore diameterd | 25 mm | 25 mm |
| Outside diameterD | 42 mm | 42 mm |
| WidthB | 23 mm | 23 mm |
| Basic dynamic load ratingC | — | 26.5 kN |
| Basic static load ratingC0 | — | 31.5 kN |
| Fatigue load limitPu | — | 5.8 kN |
| Reference speednref | 13000 r/min | 12000 r/min |
| Limiting speednG | 15000 r/min | 14600 r/min |
| Mass≈m | 0.119 kg | 0.12098 kg |
| Internal clearance | CN | — |
| Bearing material | Bearing steel | — |
| Dimensions | ||
| Width, outer ring | 23.0 mm | — |
| Engineering — Abutment dimensions | ||
| Diameter of shaft abutmentd a | min. 27 mm | — |
| Diameter of housing abutmentD a | max. 40 mm | — |
| Radius of filletr a | max. 0.3 mm | — |
| Engineering — Calculation data | ||
| Basic dynamic load rating, radialC | 24.2 kN | — |
| Basic static load rating, radialC 0 | 34.5 kN | — |
| Basic dynamic load rating, axialC | 4.24 kN | — |
| Basic static load rating, axialC 0 | 5.26 kN | — |
| Fatigue load limit, radialP u | 4.15 kN | — |
| Fatigue load limit, axialP u | 0.224 kN | — |
| Engineering — Dimensions | ||
| Diameter of inner ring racewayF | 30 mm | — |
| Chamfer dimensionr 1 ,2 | min. 0.3 mm | — |
| Logistics | ||
| Product net weight | 0.119 kg | — |
| eClass code | 23-05-09-03 | — |
| UNSPSC code | 31171512 | — |
| Manufacturer Identity | ||
| Schaeffler Product Code | — | 397307 |
| Base Type | — | NKIA5905 |
| Gpsd Group | — | I01 |
| Product Line Id | — | 09 |
| Product identity | ||
| Official product category | Combined needle roller / angular contact ball bearings | — |
| Official taxonomy path | /products/rolling-bearings/roller-bearings/needle-roller-bearings/combined-needle-roller-bearings | — |
| Structure group ID | BVN_001 | — |
| Available from SKF | Yes | — |
| Remanufacturable | No | — |
| Product Identity | ||
| Short Description | — | Needle roller/angular contact ball bearing |
| Properties | ||
| Rolling bearing type | Needle roller / angular contact ball bearing | — |
| Bearing part | Complete bearing | — |
| Thrust part | With cage | — |
| Radial part | With cage | — |
| Rolling element (thrust part) | Balls | — |
| Axial load capability | Single-direction | — |
| Radial internal clearance | CN | — |
| Tolerance class | Normal | — |
| Material, bearing | Bearing steel | — |
| Coating | Without | — |
| Lubricant (thrust part) | None | — |
| Indicative carbon footprint for new product | 0.44 kg CO 2 e | — |
| Technical Data | ||
| Bore Diameter (D) | — | 25 mm |
| Outside Diamater (D) | — | 42 mm |
| Total Width (B) | — | 23 mm |
| Basic Dynamic Load Rating, Radial (Cr) | — | 26,500 N |
| Basic Static Load Rating, Radial (C0R) | — | 31,500 N |
| Basic Dynamic Load Rating, Axial (Ca) | — | 5,400 N |
| Basic Static Load Rating, Axial (C0A) | — | 9,300 N |
| Raceway Diameter Inner Ring (F) | — | 30 mm |
| Limiting Speed (Limiting Spe) | — | 14,600 1/min |
| Reference Speed (Nϑr) | — | 12,000 1/min |
| Fatigue Load Limit, Axial (Cua) | — | 420 N |
| Fatigue Limit Load, Radial (Cur) | — | 5,800 N |
| Minimum Chamfer Dimension (Rmin) | — | 0.3 mm |
| Fatigue Load Limit, Radial (Cur) | — | 5,800 N |
Automatic matching is a search aid, not an interchangeability declaration. Confirm the full suffix, tolerances, internal design and application limits before substitution.