Cross-brand designation analysis
COMPARE / VERIFY
Same-model Comparison
Explore products that share a base designation across loaded brands, with dimensional agreement and data gaps shown clearly.
Cross Reference centre · Interchange verification checklist · Understand suffix differences
You entered NJ424-XL-M1. This table explores the base group NJ424; it does not preserve or approve every requested suffix. Search your complete marking first →
Automatic candidate selection
One base designation across loaded brands
Exact designations rank first. Dimensions, suffixes and other technical differences remain visible so the result is not mistaken for an interchangeability declaration.
Dimensions verified
“NJ424” across 2 loaded brands
At least two brands share the same bore, outside diameter and width. Use Custom Compare when you want to choose exact suffix variants yourself.
Technical comparison
Choose exact variants instead →Brand differences at a glance
| Parameter | FAGNJ424-XL-M1120 × 310 × 72 mm | KOYONJ424120 × 310 × 72 mm |
|---|---|---|
| Comparable specifications | ||
| Brand | FAG | KOYO |
| Designation | NJ424-XL-M1 | NJ424 |
| Product family | — | Single-row / NJ |
| Detailed type | Cylindrical roller bearings | Cylindrical roller bearings |
| Series | NJ424 | — |
| Bore diameterd | 120 mm | 120 mm |
| Outside diameterD | 310 mm | 310 mm |
| WidthB | 72 mm | 72 mm |
| Basic dynamic load ratingC | 850 kN | 841 kN |
| Basic static load ratingC0 | 840 kN | 770 kN |
| Fatigue load limitPu | 131 kN | 98.7 kN |
| Reference speednref | 2200 r/min | — |
| Limiting speednG | 3950 r/min | 1900 r/min |
| Mass≈m | 32.1 kg | 28.5 kg |
| Precision class | PN — Normal (ISO 492:2023) | — |
| Internal clearance | CN (Group N) — Normal internal clearance | — |
| Cage | M1 — Two Piece Brass Cage Roller Guided | — |
| Minimum operating temperatureTmin | -30 °C | — |
| Maximum operating temperatureTmax | 150 °C | — |
| Additional information | ||
| L-washer | HJ424 | — |
| Capabilities & suitability | ||
| Radial load capacity | Yes | — |
| Axial load capacity in one direction | Yes | — |
| Suitable for grease lubrication | Yes | — |
| Suitable for oil lubrication | Yes | — |
| Unsealed design | Yes | — |
| Classification | ||
| Official Category Path | — | Cylindrical roller bearings - Single-row - NJ |
| Official Classification 1 | — | Cylindrical roller bearings / Single-row / NJ |
| Dimensions | ||
| Minimum chamfer dimensionrmin | 5 mm | — |
| Minimum chamfer dimensionrmin | 0.197 in | — |
| Minimum chamfer dimensionr1 min | 5 mm | — |
| Minimum chamfer dimensionr1 min | 0.197 in | — |
| Axial displacements | 6.9 mm | — |
| Axial displacements | 0.272 in | — |
| Raceway diameter outer ringE | 260 mm | — |
| Raceway diameter outer ringE | 10.236 in | — |
| Raceway diameter inner ringF | 170 mm | — |
| Raceway diameter inner ringF | 6.693 in | — |
| Minimum rib diameter outer ringD1 min | 243.9 mm | — |
| Minimum rib diameter outer ringD1 min | 9.602 in | — |
| Maximum rib diameter inner ringd1 | 187.3 mm | — |
| Maximum rib diameter inner ringd1 | 7.374 in | — |
| Main Dimensions & Performance Data | ||
| Basic dynamic load rating, radialCr | 850,000 N | — |
| Basic dynamic load rating, radialCr | 191,097.122 lbf | — |
| Basic static load rating, radialC0r | 840,000 N | — |
| Basic static load rating, radialC0r | 188,848.921 lbf | — |
| Fatigue load limit, radialCur | 131,000 N | — |
| Fatigue load limit, radialCur | 29,451.439 lbf | — |
| Manufacturer Identity | ||
| Schaeffler Product Code | 1693558 | — |
| Official Class Key | — | 040-010-000 |
| Base Type | NJ424 | — |
| Gpsd Group | F01 | — |
| Product Line Id | 63 | — |
| SAP material number | 0167368850000 | — |
| Base product | 2305090111 | — |
| Bearing X designation | NJ424-XL-M1 | — |
| Mounting Manager ID | NJ424-XL-M1 | — |
| Grease application ID | NJ424-XL-M1 | — |
| Mounting dimensions | ||
| Minimum diameter shaft shoulderda min | 144 mm | — |
| Minimum diameter shaft shoulderda min | 5.669 in | — |
| Maximum diameter of shaft shoulderda max | 168 mm | — |
| Maximum diameter of shaft shoulderda max | 6.614 in | — |
| Maximum diameter of housing shoulderDa max | 286 mm | — |
| Maximum diameter of housing shoulderDa max | 11.26 in | — |
| Minimum shaft shoulderdc min | 190 mm | — |
| Minimum shaft shoulderdc min | 7.48 in | — |
| Maximum recess radiusra max | 4 mm | — |
| Maximum recess radiusra max | 0.157 in | — |
| Product characteristics | ||
| Design | Standard | — |
| Radial internal clearanceCN (Group N) | Normal internal clearance | — |
| Tolerance classPN | Normal (ISO 492:2023) | — |
| Number of rows1 | Single-row design | — |
| Product Identity | ||
| Construction | Cylindrical roller bearing NJ..-M1, with cage, single row, semi-locating bearing, 2 ribs on outer ring, 1 rib on inner ring, type NJ | — |
| Short Description | Cylindrical roller bearing | — |
| Technical Data | ||
| d | — | 310 mm |
| B | — | 72 mm |
| Bore Diameter (D) | 120 mm | — |
| R(Min.) | — | 5 mm |
| Outside Diamater (D) | 310 mm | — |
| R1(Min.) | — | 5 mm |
| Total Width (B) | 72 mm | — |
| Fw | — | 170 mm |
| Basic Dynamic Load Rating, Radial (Cr) | 850,000 N | — |
| Ew | — | - mm |
| Basic Static Load Rating, Radial (C0R) | 840,000 N | — |
| Basic Load Ratings : Cr | — | 841 kN |
| Raceway Diameter Inner Ring (F) | 170 mm | — |
| Basic Load Ratings : C0R | — | 770 kN |
| Operating Temperature Min. (Tmin) | -30 °C | — |
| Fatigue Load Limit : Cu | — | 98.7 kN |
| Minimum Diameter Shaft Shoulder (Da) | 144 mm | — |
| Limiting Speeds(Grease Lub.) | — | 1900 min-1 |
| Operating Temperature Max. (Tmax) | 150 °C | — |
| Limiting Speeds(Oil Lub.) | — | 2600 min-1 |
| Limiting Speed (Limiting Spe) | 3,950 1/min | — |
| Sd1 | — | - mm |
| Minimum Shaft Shoulder (Dc Min) | 190 mm | — |
| B1 | — | - mm |
| Reference Speed (Nϑr) | 2,200 1/min | — |
| B2 | — | - mm |
| Maximum Recess Radius (Ra Max) | 4 mm | — |
| Da(Min.) | — | - mm |
| Maximum Diameter Of Housing Shoulder (Da) | 286 mm | — |
| Db(Min.) | — | - mm |
| Maximum Rib Diameter Inner Ring (D1) | 187.3 mm | — |
| Db(Max.) | — | - mm |
| Minimum Chamfer Dimension (R1 Min) | 5 mm | — |
| Dc(Min.) | — | - mm |
| Axial Displacement (S) | 6.9 mm | — |
| Dd(Min.) | — | - mm |
| Minimum Rib Diameter Outer Ring (D1 Min) | 243.9 mm | — |
| Da(Max.) | — | 290 mm |
| Maximum Diameter Of Shaft Shoulder (Da Max) | 168 mm | — |
| Minimum Chamfer Dimension (Rmin) | 5 mm | — |
| Raceway Diameter Outer Ring (E) | 260 mm | — |
| Ra(Max.) | — | 4 mm |
| Fatigue Load Limit, Radial (Cur) | 131,000 N | — |
| Rb(Max.) | — | 4 mm |
| Mass(Refer.) | — | 28.5 kg |
| Temperature range | ||
| Operating temperature min.Tmin | -30 °C | — |
| Operating temperature min.Tmin | -22 °F | — |
| Operating temperature max.Tmax | 150 °C | — |
| Operating temperature max.Tmax | 302 °F | — |
Automatic matching is a search aid, not an interchangeability declaration. Confirm the full suffix, tolerances, internal design and application limits before substitution.