Cross-brand designation analysis
COMPARE / VERIFY
Same-model Comparison
Explore products that share a base designation across loaded brands, with dimensional agreement and data gaps shown clearly.
Cross Reference centre · Interchange verification checklist · Understand suffix differences
You entered NJ417-XL-M1. This table explores the base group NJ417; it does not preserve or approve every requested suffix. Search your complete marking first →
Automatic candidate selection
One base designation across loaded brands
Exact designations rank first. Dimensions, suffixes and other technical differences remain visible so the result is not mistaken for an interchangeability declaration.
Dimensions verified
“NJ417” across 2 loaded brands
At least two brands share the same bore, outside diameter and width. Use Custom Compare when you want to choose exact suffix variants yourself.
Technical comparison
Choose exact variants instead →Brand differences at a glance
| Parameter | FAGNJ417-XL-M185 × 210 × 52 mm | KOYONJ41785 × 210 × 52 mm |
|---|---|---|
| Comparable specifications | ||
| Brand | FAG | KOYO |
| Designation | NJ417-XL-M1 | NJ417 |
| Product family | — | Single-row / NJ |
| Detailed type | Cylindrical roller bearings | Cylindrical roller bearings |
| Series | NJ417 | — |
| Bore diameterd | 85 mm | 85 mm |
| Outside diameterD | 210 mm | 210 mm |
| WidthB | 52 mm | 52 mm |
| Basic dynamic load ratingC | 420 kN | 416 kN |
| Basic static load ratingC0 | 385 kN | 350 kN |
| Fatigue load limitPu | 67 kN | 49.7 kN |
| Reference speednref | 3850 r/min | — |
| Limiting speednG | 6000 r/min | 3000 r/min |
| Mass≈m | 10.07 kg | 8.89 kg |
| Precision class | PN — Normal (ISO 492:2023) | — |
| Internal clearance | CN (Group N) — Normal internal clearance | — |
| Cage | M1 — Two Piece Brass Cage Roller Guided | — |
| Minimum operating temperatureTmin | -30 °C | — |
| Maximum operating temperatureTmax | 150 °C | — |
| Additional information | ||
| L-washer | HJ417 | — |
| Capabilities & suitability | ||
| Radial load capacity | Yes | — |
| Axial load capacity in one direction | Yes | — |
| Suitable for grease lubrication | Yes | — |
| Suitable for oil lubrication | Yes | — |
| Unsealed design | Yes | — |
| Classification | ||
| Official Category Path | — | Cylindrical roller bearings - Single-row - NJ |
| Official Classification 1 | — | Cylindrical roller bearings / Single-row / NJ |
| Dimensions | ||
| Minimum chamfer dimensionrmin | 4 mm | — |
| Minimum chamfer dimensionrmin | 0.157 in | — |
| Minimum chamfer dimensionr1 min | 4 mm | — |
| Minimum chamfer dimensionr1 min | 0.157 in | — |
| Axial displacements | 5.2 mm | — |
| Axial displacements | 0.205 in | — |
| Raceway diameter outer ringE | 177 mm | — |
| Raceway diameter outer ringE | 6.969 in | — |
| Raceway diameter inner ringF | 113 mm | — |
| Raceway diameter inner ringF | 4.449 in | — |
| Minimum rib diameter outer ringD1 min | 165.7 mm | — |
| Minimum rib diameter outer ringD1 min | 6.524 in | — |
| Maximum rib diameter inner ringd1 | 125.8 mm | — |
| Maximum rib diameter inner ringd1 | 4.953 in | — |
| Main Dimensions & Performance Data | ||
| Basic dynamic load rating, radialCr | 420,000 N | — |
| Basic dynamic load rating, radialCr | 94,424.46 lbf | — |
| Basic static load rating, radialC0r | 385,000 N | — |
| Basic static load rating, radialC0r | 86,555.755 lbf | — |
| Fatigue load limit, radialCur | 67,000 N | — |
| Fatigue load limit, radialCur | 15,062.95 lbf | — |
| Manufacturer Identity | ||
| Schaeffler Product Code | 1693557 | — |
| Official Class Key | — | 040-010-000 |
| Base Type | NJ417 | — |
| Gpsd Group | F01 | — |
| Product Line Id | 63 | — |
| SAP material number | 0167368420000 | — |
| Base product | 2305090111 | — |
| Bearing X designation | NJ417-XL-M1 | — |
| Mounting Manager ID | NJ417-XL-M1 | — |
| Grease application ID | NJ417-XL-M1 | — |
| Mounting dimensions | ||
| Minimum diameter shaft shoulderda min | 105 mm | — |
| Minimum diameter shaft shoulderda min | 4.134 in | — |
| Maximum diameter of shaft shoulderda max | 111 mm | — |
| Maximum diameter of shaft shoulderda max | 4.37 in | — |
| Maximum diameter of housing shoulderDa max | 190 mm | — |
| Maximum diameter of housing shoulderDa max | 7.48 in | — |
| Minimum shaft shoulderdc min | 128 mm | — |
| Minimum shaft shoulderdc min | 5.039 in | — |
| Maximum recess radiusra max | 3 mm | — |
| Maximum recess radiusra max | 0.118 in | — |
| Product characteristics | ||
| Design | Standard | — |
| Radial internal clearanceCN (Group N) | Normal internal clearance | — |
| Tolerance classPN | Normal (ISO 492:2023) | — |
| Number of rows1 | Single-row design | — |
| Product Identity | ||
| Construction | Cylindrical roller bearing NJ..-M1, with cage, single row, semi-locating bearing, 2 ribs on outer ring, 1 rib on inner ring, type NJ | — |
| Short Description | Cylindrical roller bearing | — |
| Technical Data | ||
| d | — | 210 mm |
| B | — | 52 mm |
| Bore Diameter (D) | 85 mm | — |
| R(Min.) | — | 4 mm |
| Outside Diamater (D) | 210 mm | — |
| R1(Min.) | — | 4 mm |
| Total Width (B) | 52 mm | — |
| Fw | — | 113 mm |
| Basic Dynamic Load Rating, Radial (Cr) | 420,000 N | — |
| Ew | — | - mm |
| Basic Static Load Rating, Radial (C0R) | 385,000 N | — |
| Basic Load Ratings : Cr | — | 416 kN |
| Raceway Diameter Inner Ring (F) | 113 mm | — |
| Basic Load Ratings : C0R | — | 350 kN |
| Operating Temperature Min. (Tmin) | -30 °C | — |
| Fatigue Load Limit : Cu | — | 49.7 kN |
| Minimum Diameter Shaft Shoulder (Da) | 105 mm | — |
| Limiting Speeds(Grease Lub.) | — | 3000 min-1 |
| Operating Temperature Max. (Tmax) | 150 °C | — |
| Limiting Speeds(Oil Lub.) | — | 4000 min-1 |
| Limiting Speed (Limiting Spe) | 6,000 1/min | — |
| Sd1 | — | - mm |
| Minimum Shaft Shoulder (Dc Min) | 128 mm | — |
| B1 | — | - mm |
| Reference Speed (Nϑr) | 3,850 1/min | — |
| B2 | — | - mm |
| Maximum Recess Radius (Ra Max) | 3 mm | — |
| Da(Min.) | — | - mm |
| Maximum Diameter Of Housing Shoulder (Da) | 190 mm | — |
| Db(Min.) | — | - mm |
| Maximum Rib Diameter Inner Ring (D1) | 125.8 mm | — |
| Db(Max.) | — | - mm |
| Minimum Chamfer Dimension (R1 Min) | 4 mm | — |
| Dc(Min.) | — | - mm |
| Axial Displacement (S) | 5.2 mm | — |
| Dd(Min.) | — | - mm |
| Minimum Rib Diameter Outer Ring (D1 Min) | 165.7 mm | — |
| Da(Max.) | — | 194 mm |
| Maximum Diameter Of Shaft Shoulder (Da Max) | 111 mm | — |
| Minimum Chamfer Dimension (Rmin) | 4 mm | — |
| Raceway Diameter Outer Ring (E) | 177 mm | — |
| Ra(Max.) | — | 3 mm |
| Fatigue Load Limit, Radial (Cur) | 67,000 N | — |
| Rb(Max.) | — | 3 mm |
| Mass(Refer.) | — | 8.89 kg |
| Temperature range | ||
| Operating temperature min.Tmin | -30 °C | — |
| Operating temperature min.Tmin | -22 °F | — |
| Operating temperature max.Tmax | 150 °C | — |
| Operating temperature max.Tmax | 302 °F | — |
Automatic matching is a search aid, not an interchangeability declaration. Confirm the full suffix, tolerances, internal design and application limits before substitution.