Cross-brand designation analysis
COMPARE / VERIFY
Same-model Comparison
Explore products that share a base designation across loaded brands, with dimensional agreement and data gaps shown clearly.
Cross Reference centre · Interchange verification checklist · Understand suffix differences
You entered NJ414-XL-M1. This table explores the base group NJ414; it does not preserve or approve every requested suffix. Search your complete marking first →
Automatic candidate selection
One base designation across loaded brands
Exact designations rank first. Dimensions, suffixes and other technical differences remain visible so the result is not mistaken for an interchangeability declaration.
Dimensions verified
“NJ414” across 2 loaded brands
At least two brands share the same bore, outside diameter and width. Use Custom Compare when you want to choose exact suffix variants yourself.
Technical comparison
Choose exact variants instead →Brand differences at a glance
| Parameter | FAGNJ414-XL-M170 × 180 × 42 mm | KOYONJ41470 × 180 × 42 mm |
|---|---|---|
| Comparable specifications | ||
| Brand | FAG | KOYO |
| Designation | NJ414-XL-M1 | NJ414 |
| Product family | — | Single-row / NJ |
| Detailed type | Cylindrical roller bearings | Cylindrical roller bearings |
| Series | NJ414 | — |
| Bore diameterd | 70 mm | 70 mm |
| Outside diameterD | 180 mm | 180 mm |
| WidthB | 42 mm | 42 mm |
| Basic dynamic load ratingC | 285 kN | 285 kN |
| Basic static load ratingC0 | 255 kN | 257 kN |
| Fatigue load limitPu | 46 kN | 35.2 kN |
| Reference speednref | 4250 r/min | — |
| Limiting speednG | 7100 r/min | 3500 r/min |
| Mass≈m | 6.1 kg | 5.37 kg |
| Precision class | PN — Normal (ISO 492:2023) | — |
| Internal clearance | CN (Group N) — Normal internal clearance | — |
| Cage | M1 — Two Piece Brass Cage Roller Guided | — |
| Minimum operating temperatureTmin | -30 °C | — |
| Maximum operating temperatureTmax | 150 °C | — |
| Additional information | ||
| L-washer | HJ414 | — |
| Capabilities & suitability | ||
| Radial load capacity | Yes | — |
| Axial load capacity in one direction | Yes | — |
| Suitable for grease lubrication | Yes | — |
| Suitable for oil lubrication | Yes | — |
| Unsealed design | Yes | — |
| Classification | ||
| Official Category Path | — | Cylindrical roller bearings - Single-row - NJ |
| Official Classification 1 | — | Cylindrical roller bearings / Single-row / NJ |
| Dimensions | ||
| Minimum chamfer dimensionrmin | 3 mm | — |
| Minimum chamfer dimensionrmin | 0.118 in | — |
| Minimum chamfer dimensionr1 min | 3 mm | — |
| Minimum chamfer dimensionr1 min | 0.118 in | — |
| Axial displacements | 4 mm | — |
| Axial displacements | 0.157 in | — |
| Raceway diameter outer ringE | 152 mm | — |
| Raceway diameter outer ringE | 5.984 in | — |
| Raceway diameter inner ringF | 100 mm | — |
| Raceway diameter inner ringF | 3.937 in | — |
| Minimum rib diameter outer ringD1 min | 142.7 mm | — |
| Minimum rib diameter outer ringD1 min | 5.618 in | — |
| Maximum rib diameter inner ringd1 | 110.3 mm | — |
| Maximum rib diameter inner ringd1 | 4.343 in | — |
| Main Dimensions & Performance Data | ||
| Basic dynamic load rating, radialCr | 285,000 N | — |
| Basic dynamic load rating, radialCr | 64,073.741 lbf | — |
| Basic static load rating, radialC0r | 255,000 N | — |
| Basic static load rating, radialC0r | 57,329.137 lbf | — |
| Fatigue load limit, radialCur | 46,000 N | — |
| Fatigue load limit, radialCur | 10,341.727 lbf | — |
| Manufacturer Identity | ||
| Schaeffler Product Code | 1693583 | — |
| Official Class Key | — | 040-010-000 |
| Base Type | NJ414 | — |
| Gpsd Group | F01 | — |
| Product Line Id | 63 | — |
| SAP material number | 0192300360000 | — |
| Base product | 2305090111 | — |
| Bearing X designation | NJ414-XL-M1 | — |
| Mounting Manager ID | NJ414-XL-M1 | — |
| Grease application ID | NJ414-XL-M1 | — |
| Mounting dimensions | ||
| Minimum diameter shaft shoulderda min | 86 mm | — |
| Minimum diameter shaft shoulderda min | 3.386 in | — |
| Maximum diameter of shaft shoulderda max | 99 mm | — |
| Maximum diameter of shaft shoulderda max | 3.898 in | — |
| Maximum diameter of housing shoulderDa max | 164 mm | — |
| Maximum diameter of housing shoulderDa max | 6.457 in | — |
| Minimum shaft shoulderdc min | 112 mm | — |
| Minimum shaft shoulderdc min | 4.409 in | — |
| Maximum recess radiusra max | 2.5 mm | — |
| Maximum recess radiusra max | 0.098 in | — |
| Product characteristics | ||
| Design | Standard | — |
| Radial internal clearanceCN (Group N) | Normal internal clearance | — |
| Tolerance classPN | Normal (ISO 492:2023) | — |
| Number of rows1 | Single-row design | — |
| Product Identity | ||
| Construction | Cylindrical roller bearing NJ..-M1, with cage, single row, semi-locating bearing, 2 ribs on outer ring, 1 rib on inner ring, type NJ | — |
| Short Description | Cylindrical roller bearing | — |
| Technical Data | ||
| d | — | 180 mm |
| B | — | 42 mm |
| Bore Diameter (D) | 70 mm | — |
| R(Min.) | — | 3 mm |
| Outside Diamater (D) | 180 mm | — |
| R1(Min.) | — | 3 mm |
| Total Width (B) | 42 mm | — |
| Fw | — | 100 mm |
| Basic Dynamic Load Rating, Radial (Cr) | 285,000 N | — |
| Ew | — | - mm |
| Basic Static Load Rating, Radial (C0R) | 255,000 N | — |
| Basic Load Ratings : Cr | — | 285 kN |
| Raceway Diameter Inner Ring (F) | 100 mm | — |
| Basic Load Ratings : C0R | — | 257 kN |
| Operating Temperature Min. (Tmin) | -30 °C | — |
| Fatigue Load Limit : Cu | — | 35.2 kN |
| Minimum Diameter Shaft Shoulder (Da) | 86 mm | — |
| Limiting Speeds(Grease Lub.) | — | 3500 min-1 |
| Operating Temperature Max. (Tmax) | 150 °C | — |
| Limiting Speeds(Oil Lub.) | — | 4700 min-1 |
| Limiting Speed (Limiting Spe) | 7,100 1/min | — |
| Sd1 | — | - mm |
| Minimum Shaft Shoulder (Dc Min) | 112 mm | — |
| B1 | — | - mm |
| Reference Speed (Nϑr) | 4,250 1/min | — |
| B2 | — | - mm |
| Maximum Recess Radius (Ra Max) | 2.5 mm | — |
| Da(Min.) | — | - mm |
| Maximum Diameter Of Housing Shoulder (Da) | 164 mm | — |
| Db(Min.) | — | - mm |
| Maximum Rib Diameter Inner Ring (D1) | 110.3 mm | — |
| Db(Max.) | — | - mm |
| Minimum Chamfer Dimension (R1 Min) | 3 mm | — |
| Dc(Min.) | — | - mm |
| Axial Displacement (S) | 4 mm | — |
| Dd(Min.) | — | - mm |
| Minimum Rib Diameter Outer Ring (D1 Min) | 142.7 mm | — |
| Da(Max.) | — | 167 mm |
| Maximum Diameter Of Shaft Shoulder (Da Max) | 99 mm | — |
| Minimum Chamfer Dimension (Rmin) | 3 mm | — |
| Raceway Diameter Outer Ring (E) | 152 mm | — |
| Ra(Max.) | — | 2.5 mm |
| Fatigue Load Limit, Radial (Cur) | 46,000 N | — |
| Rb(Max.) | — | 2.5 mm |
| Mass(Refer.) | — | 5.37 kg |
| Temperature range | ||
| Operating temperature min.Tmin | -30 °C | — |
| Operating temperature min.Tmin | -22 °F | — |
| Operating temperature max.Tmax | 150 °C | — |
| Operating temperature max.Tmax | 302 °F | — |
Automatic matching is a search aid, not an interchangeability declaration. Confirm the full suffix, tolerances, internal design and application limits before substitution.