Cross-brand designation analysis
COMPARE / VERIFY
Same-model Comparison
Explore products that share a base designation across loaded brands, with dimensional agreement and data gaps shown clearly.
Cross Reference centre · Interchange verification checklist · Understand suffix differences
You entered NJ2332-E-XL-MPAX-QP51-ILR-C4. This table explores the base group NJ2332; it does not preserve or approve every requested suffix. Search your complete marking first →
Automatic candidate selection
One base designation across loaded brands
Exact designations rank first. Dimensions, suffixes and other technical differences remain visible so the result is not mistaken for an interchangeability declaration.
Dimensions verified
“NJ2332” across 5 loaded brands
At least two brands share the same bore, outside diameter and width. Use Custom Compare when you want to choose exact suffix variants yourself.
Technical comparison
Choose exact variants instead →Brand differences at a glance
| Parameter | SKFNJ 2332 ECML160 × 340 × 114 mm | FAGNJ2332-E-M1160 × 340 × 114 mm | TIMKENNJ2332EMA160 × 340 × 114 mm | NSKNJ2332EM160 × 340 × 114 mm | KOYONJ2332160 × 340 × 114 mm |
|---|---|---|---|---|---|
| Comparable specifications | |||||
| Brand | SKF | FAG | TIMKEN | NSK | KOYO |
| Designation | NJ 2332 ECML | NJ2332-E-M1 | NJ2332EMA | NJ2332EM | NJ2332 |
| Product family | Cylindrical roller bearings | — | Cylindrical 1-Row | Cylindrical roller bearing | Single-row / NJ |
| Detailed type | Single row cylindrical roller bearing, nj design | Cylindrical roller bearings | Cylindrical roller bearings | Cylindrical roller bearings | Cylindrical roller bearings |
| Series | — | NJ2332 | EX27738 | — | — |
| Bore diameterd | 160 mm | 160 mm | 160 mm | 160 mm | 160 mm |
| Outside diameterD | 340 mm | 340 mm | 340 mm | 340 mm | 340 mm |
| WidthB | 114 mm | 114 mm | 114 mm | 114 mm | 114 mm |
| Basic dynamic load ratingC | 1250 kN | 1300 kN | 1500 kN | 1610 kN | 1340 kN |
| Basic static load ratingC0 | 1730 kN | 1800 kN | 1840 kN | 1820 kN | 1520 kN |
| Fatigue load limitPu | 173 kN | 229 kN | — | — | 178 kN |
| Reference speednref | 1800 r/min | 1350 r/min | — | — | — |
| Limiting speednG | 3600 r/min | 3000 r/min | — | — | 1400 r/min |
| Mass≈m | 50.7 kg | 52.6 kg | 53.1 kg | — | 53.7 kg |
| Precision class | — | PN — Normal (ISO 492:2023) | — | — | — |
| Internal clearance | CN | CN (Group N) — Normal internal clearance | — | — | — |
| Sealing | Without | — | Open | — | — |
| Cage | Machined brass | M1 — Two Piece Brass Cage Roller Guided | Window Brass cage | Machined brass | — |
| Lubricant | None | — | — | — | — |
| Minimum operating temperatureTmin | — | -30 °C | — | — | — |
| Maximum operating temperatureTmax | — | 150 °C | — | — | — |
| Additional information | |||||
| L-washer | — | HJ2332-E | — | — | — |
| Boundary dimensions | |||||
| Bearing widthB | — | — | — | 114 mm | — |
| Minimum bearing chamferr min. | — | — | — | 4 mm | — |
| Minimum secondary bearing chamferr1 min. | — | — | — | 4 mm | — |
| Roller inscribed circle diameterFw | — | — | — | 204 mm | — |
| Calculation Factors | |||||
| K Factor | — | — | 0.00 | — | — |
| Y1 Factor | — | — | 0.00 | — | — |
| Y2 Factor | — | — | 0.00 | — | — |
| Y0 Factor | — | — | 0.00 | — | — |
| E Factor | — | — | 0.00 | — | — |
| Cg Factor | — | — | 0.1412 | — | — |
| Capabilities & suitability | |||||
| Radial load capacity | — | Yes | — | — | — |
| Axial load capacity in one direction | — | Yes | — | — | — |
| Suitable for grease lubrication | — | Yes | — | — | — |
| Suitable for oil lubrication | — | Yes | — | — | — |
| Unsealed design | — | Yes | — | — | — |
| Largebearing | — | Yes | — | — | — |
| Catalogue reference mass | |||||
| Approximate shared-row mass — not separately stated for each rib arrangement | — | — | — | 53.9 kg | — |
| Classification | |||||
| Official Category Path | — | — | — | — | Cylindrical roller bearings - Single-row - NJ |
| Official Classification 1 | — | — | — | — | Cylindrical roller bearings / Single-row / NJ |
| Construction | |||||
| Single-row construction type | — | — | — | NJ | — |
| Rib arrangement | — | — | — | Two outer-ring ribs; one inner-ring rib | — |
| Standard cage material | — | — | — | Machined brass | — |
| Standard cage marking | — | — | — | M | — |
| Other cage codes listed for this catalogue row | — | — | — | None listed in this row | — |
| Precision — designation omission rule | — | — | — | ISO Normal when no precision suffix is specified | — |
| Clearance identification — verify interchangeability | — | — | — | No clearance suffix shown. CN omission applies to interchangeable designs; do not infer a numerical clearance. | — |
| Optimized crowning note | — | — | — | No optimized-crowning asterisk on this row | — |
| Dimensions | |||||
| Minimum chamfer dimensionrmin | — | 4 mm | — | — | — |
| Minimum chamfer dimensionrmin | — | 0.157 in | — | — | — |
| Minimum chamfer dimensionr1 min | — | 4 mm | — | — | — |
| Minimum chamfer dimensionr1 min | — | 0.157 in | — | — | — |
| Axial displacements | — | 9.9 mm | — | — | — |
| Axial displacements | — | 0.39 in | — | — | — |
| Raceway diameter outer ringE | — | 300 mm | — | — | — |
| Raceway diameter outer ringE | — | 11.811 in | — | — | — |
| Raceway diameter inner ringF | — | 204 mm | — | — | — |
| Raceway diameter inner ringF | — | 8.031 in | — | — | — |
| Minimum rib diameter outer ringD1 min | — | 286 mm | — | — | — |
| Minimum rib diameter outer ringD1 min | — | 11.26 in | — | — | — |
| Maximum rib diameter inner ringd1 | — | 221.6 mm | — | — | — |
| Maximum rib diameter inner ringd1 | — | 8.724 in | — | — | — |
| Engineering — Abutment dimensions | |||||
| Diameter of spacer sleeved a | max. 199 mm | — | — | — | — |
| Diameter of shaft abutmentd b | min. 225 mm | — | — | — | — |
| Diameter of housing abutmentD a | max. 321.9 mm | — | — | — | — |
| Radius of filletr a | max. 3 mm | — | — | — | — |
| Engineering — Calculation data | |||||
| Minimum load factork r | 0.38 | — | — | — | — |
| Limiting valuee | 0.3 | — | — | — | — |
| Calculation factorY | 0.4 | — | — | — | — |
| Engineering — Dimensions | |||||
| Shoulder diameter of inner ringd 1 | ≈ 221 mm | — | — | — | — |
| Shoulder diameter of outer ringD 1 | ≈ 286 mm | — | — | — | — |
| Raceway diameter of inner ringF | 204 mm | — | — | — | — |
| Chamfer dimensionr 1,2 | min. 4 mm | — | — | — | — |
| Chamfer dimensionr 3,4 | min. 4 mm | — | — | — | — |
| Permissible axial displacements | max. 11 mm | — | — | — | — |
| Load ratings — standard cage | |||||
| Basic dynamic radial load ratingCr | — | — | — | 1610000 N | — |
| Basic static radial load ratingC0r | — | — | — | 1820000 N | — |
| Logistics | |||||
| Product net weight | 50.7 kg | — | — | — | — |
| eClass code | 23-05-09-01 | — | — | — | — |
| UNSPSC code | 31171505 | — | — | — | — |
| Lubrication-qualified speed — standard cage | |||||
| Thermal speed rating — oil bath | — | — | — | 1800 r/min | — |
| Mechanical limiting speed — forced oil circulation | — | — | — | 2400 r/min | — |
| Limiting speed — grease | — | — | — | 1500 r/min | — |
| Limiting speed — oil bath | — | — | — | 1900 r/min | — |
| Main Dimensions & Performance Data | |||||
| Basic dynamic load rating, radialCr | — | 1,300,000 N | — | — | — |
| Basic dynamic load rating, radialCr | — | 292,266.187 lbf | — | — | — |
| Basic static load rating, radialC0r | — | 1,800,000 N | — | — | — |
| Basic static load rating, radialC0r | — | 404,676.259 lbf | — | — | — |
| Fatigue load limit, radialCur | — | 229,000 N | — | — | — |
| Fatigue load limit, radialCur | — | 51,483.813 lbf | — | — | — |
| Manufacturer Identity | |||||
| Schaeffler Product Code | — | 371139 | — | — | — |
| Material Number | — | — | 000000000190019808 | — | — |
| Official Class Key | — | — | — | — | 040-010-000 |
| Base Type | — | NJ2332 | — | — | — |
| World Assembly Part Number | — | — | NJ2332EMA | — | — |
| Old Designation | — | ["NJ2332E.M1"] | — | — | — |
| Inner Ring Part Number | — | — | 160ARJE23 | — | — |
| Gpsd Group | — | F01 | — | — | — |
| Outer Ring Part Number | — | — | 160ERUE23 | — | — |
| Product Line Id | — | 75 | — | — | — |
| Drawing Number | — | — | M103774 | — | — |
| Upc | — | — | 0053893774923 | — | — |
| Official Source System | — | — | CORE BP - DS DF | — | — |
| Official Last Run | — | — | 2026-08-23T20:02:47.753 | — | — |
| SAP material number | — | 0192270780000 | — | — | — |
| Base product | — | 2305090111 | — | — | — |
| Bearing X designation | — | NJ2332-E-M1 | — | — | — |
| Mounting Manager ID | — | NJ2332-E-M1 | — | — | — |
| Grease application ID | — | NJ2332-E-M1 | — | — | — |
| Mounting dimensions | |||||
| Minimum diameter shaft shoulderda min | — | 177 mm | — | — | — |
| Minimum diameter shaft shoulderda min | — | 6.969 in | — | — | — |
| Maximum diameter of shaft shoulderda max | — | 200 mm | — | — | — |
| Maximum diameter of shaft shoulderda max | — | 7.874 in | — | — | — |
| Maximum diameter of housing shoulderDa max | — | 323 mm | — | — | — |
| Maximum diameter of housing shoulderDa max | — | 12.717 in | — | — | — |
| Minimum shaft shoulderdc min | — | 228 mm | — | — | — |
| Minimum shaft shoulderdc min | — | 8.976 in | — | — | — |
| Maximum recess radiusra max | — | 3 mm | — | — | — |
| Maximum recess radiusra max | — | 0.118 in | — | — | — |
| Mounting dimensions — shown arrangement | |||||
| Minimum shaft shoulder diameterdb min. | — | — | — | 176 mm | — |
| Maximum housing shoulder diameterDa max. | — | — | — | 324 mm | — |
| Maximum adjusting-ring diameter (NU/NJ arrangement)db max. | — | — | — | 199 mm | — |
| Maximum adjacent fillet radiusra max. | — | — | — | 3 mm | — |
| Maximum secondary adjacent fillet radiusrb max. | — | — | — | 3 mm | — |
| Product characteristics | |||||
| DesignE | — | Increased Capacity Design | — | — | — |
| Radial internal clearanceCN (Group N) | — | Normal internal clearance | — | — | — |
| Tolerance classPN | — | Normal (ISO 492:2023) | — | — | — |
| Number of rows1 | — | Single-row design | — | — | — |
| Product identity | |||||
| Official product category | Cylindrical roller bearings | — | — | — | — |
| Official taxonomy path | /products/rolling-bearings/roller-bearings/cylindrical-roller-bearings/single-row-cylindrical-roller-bearings | — | — | — | — |
| Structure group ID | BC1_001_101 | — | — | — | — |
| Available from SKF | Yes | — | — | — | — |
| Remanufacturable | Yes | — | — | — | — |
| Product Identity | |||||
| Construction | — | Cylindrical roller bearing NJ..-E-M1, with cage, single row, semi-locating bearing, 2 ribs on outer ring, 1 rib on inner ring, type NJ | Single Row Cylindrical Roller Bearing | Imperial Series | 6.2992 in Bore | 13.3858 in OD | 4.4882 in Width | Open | Cylindrical Bore | Machined Window Brass Cage | C0 Clearance | — | — |
| Short Description | — | Cylindrical roller bearing | — | — | — |
| Type Description | — | — | Cylindrical 1-Row | — | — |
| Number Of Rows | 1 | — | 1 | — | — |
| Tapered Bore | — | — | N | — | — |
| Properties | |||||
| Bearing part | Complete bearing | — | — | — | — |
| Axial displacement capability | In one direction | — | — | — | — |
| Locating feature, bearing outer ring | Without | — | — | — | — |
| Bore type | Cylindrical | — | — | — | — |
| Number of flanges, outer ring | 2 | — | — | — | — |
| Number of flanges, inner ring | 1 | — | — | — | — |
| Loose flange | None | — | — | — | — |
| Radial internal clearance | CN | — | — | — | — |
| Tolerance class | Normal | — | — | — | — |
| Coating | Without | — | — | — | — |
| Relubrication feature | Without | — | — | — | — |
| Candidate for remanufacturing | Yes | — | — | — | — |
| Indicative carbon footprint for new product | 188.0 kg CO 2 e | — | — | — | — |
| Indicative carbon footprint for remanufactured product | 62.4 kg CO 2 e | — | — | — | — |
| Technical Data | |||||
| d | — | — | — | — | 340 mm |
| B | — | — | — | — | 114 mm |
| R(Min.) | — | — | — | — | 4 mm |
| Bore Diameter (D) | — | 160 mm | — | — | — |
| R1(Min.) | — | — | — | — | 4 mm |
| Outside Diamater (D) | — | 340 mm | — | — | — |
| Overall Width | — | — | 0.000 mm | — | — |
| Fw | — | — | — | — | 208 mm |
| Total Width (B) | — | 114 mm | — | — | — |
| Radial Rating | — | — | 1,500,000 N | — | — |
| Ew | — | — | — | — | - mm |
| Basic Dynamic Load Rating, Radial (Cr) | — | 1,300,000 N | — | — | — |
| Axial Rating | — | — | 0 N | — | — |
| Basic Load Ratings : Cr | — | — | — | — | 1340 kN |
| Basic Static Load Rating, Radial (C0R) | — | 1,800,000 N | — | — | — |
| Dynamic Rating C1 | — | — | 1,500,000 N | — | — |
| Basic Load Ratings : C0R | — | — | — | — | 1520 kN |
| Raceway Diameter Inner Ring (F) | — | 204 mm | — | — | — |
| Dynamic Rating C90 | — | — | 0 N | — | — |
| Fatigue Load Limit : Cu | — | — | — | — | 178 kN |
| Operating Temperature Min. (Tmin) | — | -30 °C | — | — | — |
| Dynamic Axial Rating Ca90 | — | — | 0 N | — | — |
| Limiting Speeds(Grease Lub.) | — | — | — | — | 1400 min-1 |
| Minimum Diameter Shaft Shoulder (Da) | — | 177 mm | — | — | — |
| Dynamic Axial Rating Ca1 | — | — | 0 N | — | — |
| Limiting Speeds(Oil Lub.) | — | — | — | — | 2200 min-1 |
| Operating Temperature Max. (Tmax) | — | 150 °C | — | — | — |
| Static Radial Rating C0 | — | — | 1,840,000 N | — | — |
| Sd1 | — | — | — | — | - mm |
| Limiting Speed (Limiting Spe) | — | 3,000 1/min | — | — | — |
| Extended Dynamic Rating Ce | — | — | 0 N | — | — |
| B1 | — | — | — | — | - mm |
| Minimum Shaft Shoulder (Dc Min) | — | 228 mm | — | — | — |
| Static Axial Rating C0A | — | — | 0 N | — | — |
| B2 | — | — | — | — | - mm |
| Reference Speed (Nϑr) | — | 1,350 1/min | — | — | — |
| Da(Min.) | — | — | — | — | - mm |
| Maximum Recess Radius (Ra Max) | — | 3 mm | — | — | — |
| Db(Min.) | — | — | — | — | - mm |
| Maximum Diameter Of Housing Shoulder (Da) | — | 323 mm | — | — | — |
| Db(Max.) | — | — | — | — | - mm |
| Maximum Rib Diameter Inner Ring (D1) | — | 221.6 mm | — | — | — |
| Dc(Min.) | — | — | — | — | - mm |
| Minimum Chamfer Dimension (R1 Min) | — | 4 mm | — | — | — |
| Dd(Min.) | — | — | — | — | - mm |
| Axial Displacement (S) | — | 9.9 mm | — | — | — |
| Da(Max.) | — | — | — | — | 324 mm |
| Minimum Rib Diameter Outer Ring (D1 Min) | — | 286 mm | — | — | — |
| Maximum Diameter Of Shaft Shoulder (Da Max) | — | 200 mm | — | — | — |
| Minimum Chamfer Dimension (Rmin) | — | 4 mm | — | — | — |
| Ra(Max.) | — | — | — | — | 3 mm |
| Raceway Diameter Outer Ring (E) | — | 300 mm | — | — | — |
| Rb(Max.) | — | — | — | — | 3 mm |
| Fatigue Load Limit, Radial (Cur) | — | 229,000 N | — | — | — |
| Mass(Refer.) | — | — | — | — | 53.7 kg |
| Temperature range | |||||
| Operating temperature min.Tmin | — | -30 °C | — | — | — |
| Operating temperature min.Tmin | — | -22 °F | — | — | — |
| Operating temperature max.Tmax | — | 150 °C | — | — | — |
| Operating temperature max.Tmax | — | 302 °F | — | — | — |
Automatic matching is a search aid, not an interchangeability declaration. Confirm the full suffix, tolerances, internal design and application limits before substitution.