Cross-brand designation analysis
COMPARE / VERIFY
Same-model Comparison
Explore products that share a base designation across loaded brands, with dimensional agreement and data gaps shown clearly.
Cross Reference centre · Interchange verification checklist · Understand suffix differences
You entered NJ2232-E-XL-M1A-J30PC-C3. This table explores the base group NJ2232; it does not preserve or approve every requested suffix. Search your complete marking first →
Automatic candidate selection
One base designation across loaded brands
Exact designations rank first. Dimensions, suffixes and other technical differences remain visible so the result is not mistaken for an interchangeability declaration.
Dimensions verified
“NJ2232” across 5 loaded brands
At least two brands share the same bore, outside diameter and width. Use Custom Compare when you want to choose exact suffix variants yourself.
Technical comparison
Choose exact variants instead →Brand differences at a glance
| Parameter | SKFNJ 2232 ECML160 × 290 × 80 mm | FAGNJ2232-E-XL-M1160 × 290 × 80 mm | TIMKENNJ2232EMA160 × 290 × 80 mm | NSKNJ2232EM160 × 290 × 80 mm | KOYONJ2232160 × 290 × 80 mm |
|---|---|---|---|---|---|
| Comparable specifications | |||||
| Brand | SKF | FAG | TIMKEN | NSK | KOYO |
| Designation | NJ 2232 ECML | NJ2232-E-XL-M1 | NJ2232EMA | NJ2232EM | NJ2232 |
| Product family | Cylindrical roller bearings | — | Cylindrical 1-Row | Cylindrical roller bearing | Single-row / NJ |
| Detailed type | Single row cylindrical roller bearing, nj design | Cylindrical roller bearings | Cylindrical roller bearings | Cylindrical roller bearings | Cylindrical roller bearings |
| Series | — | NJ2232 | EX27645 | — | — |
| Bore diameterd | 160 mm | 160 mm | 160 mm | 160 mm | 160 mm |
| Outside diameterD | 290 mm | 290 mm | 290 mm | 290 mm | 290 mm |
| WidthB | 80 mm | 80 mm | 80 mm | 80 mm | 80 mm |
| Basic dynamic load ratingC | 930 kN | 940 kN | 919 kN | 995 kN | 790 kN |
| Basic static load ratingC0 | 1200 kN | 1170 kN | 1210 kN | 1190 kN | 939 kN |
| Fatigue load limitPu | 129 kN | 187 kN | — | — | 113 kN |
| Reference speednref | 2400 r/min | 1660 r/min | — | — | — |
| Limiting speednG | 4000 r/min | 4150 r/min | — | — | 1800 r/min |
| Mass≈m | 23.5 kg | 23.6 kg | 24.3 kg | — | 24.2 kg |
| Precision class | — | PN — Normal (ISO 492:2023) | — | — | — |
| Internal clearance | CN | CN (Group N) — Normal internal clearance | — | — | — |
| Sealing | Without | — | Open | — | — |
| Cage | Machined brass | M1 — Two Piece Brass Cage Roller Guided | Window Brass cage | Machined brass | — |
| Lubricant | None | — | — | — | — |
| Minimum operating temperatureTmin | — | -30 °C | — | — | — |
| Maximum operating temperatureTmax | — | 150 °C | — | — | — |
| Additional information | |||||
| L-washer | — | HJ2232-E | — | — | — |
| Boundary dimensions | |||||
| Bearing widthB | — | — | — | 80 mm | — |
| Minimum bearing chamferr min. | — | — | — | 3 mm | — |
| Minimum secondary bearing chamferr1 min. | — | — | — | 3 mm | — |
| Roller inscribed circle diameterFw | — | — | — | 193 mm | — |
| Calculation Factors | |||||
| K Factor | — | — | 0.00 | — | — |
| Y1 Factor | — | — | 0.00 | — | — |
| Y2 Factor | — | — | 0.00 | — | — |
| Y0 Factor | — | — | 0.00 | — | — |
| E Factor | — | — | 0.00 | — | — |
| Cg Factor | — | — | 0.1288 | — | — |
| Capabilities & suitability | |||||
| Radial load capacity | — | Yes | — | — | — |
| Axial load capacity in one direction | — | Yes | — | — | — |
| Suitable for grease lubrication | — | Yes | — | — | — |
| Suitable for oil lubrication | — | Yes | — | — | — |
| Unsealed design | — | Yes | — | — | — |
| Catalogue reference mass | |||||
| Approximate shared-row mass — not separately stated for each rib arrangement | — | — | — | 24.5 kg | — |
| Classification | |||||
| Official Category Path | — | — | — | — | Cylindrical roller bearings - Single-row - NJ |
| Official Classification 1 | — | — | — | — | Cylindrical roller bearings / Single-row / NJ |
| Construction | |||||
| Single-row construction type | — | — | — | NJ | — |
| Rib arrangement | — | — | — | Two outer-ring ribs; one inner-ring rib | — |
| Standard cage material | — | — | — | Machined brass | — |
| Standard cage marking | — | — | — | M | — |
| Other cage codes listed for this catalogue row | — | — | — | None listed in this row | — |
| Precision — designation omission rule | — | — | — | ISO Normal when no precision suffix is specified | — |
| Clearance identification — verify interchangeability | — | — | — | No clearance suffix shown. CN omission applies to interchangeable designs; do not infer a numerical clearance. | — |
| Optimized crowning note | — | — | — | Catalogue asterisk: optimized crowning may be available; not verified as fitted | — |
| Dimensions | |||||
| Minimum chamfer dimensionrmin | — | 3 mm | — | — | — |
| Minimum chamfer dimensionrmin | — | 0.118 in | — | — | — |
| Minimum chamfer dimensionr1 min | — | 3 mm | — | — | — |
| Minimum chamfer dimensionr1 min | — | 0.118 in | — | — | — |
| Axial displacements | — | 7.2 mm | — | — | — |
| Axial displacements | — | 0.283 in | — | — | — |
| Raceway diameter outer ringE | — | 261 mm | — | — | — |
| Raceway diameter outer ringE | — | 10.276 in | — | — | — |
| Raceway diameter inner ringF | — | 193 mm | — | — | — |
| Raceway diameter inner ringF | — | 7.598 in | — | — | — |
| Minimum rib diameter outer ringD1 min | — | 251.1 mm | — | — | — |
| Minimum rib diameter outer ringD1 min | — | 9.886 in | — | — | — |
| Maximum rib diameter inner ringd1 | — | 205.5 mm | — | — | — |
| Maximum rib diameter inner ringd1 | — | 8.091 in | — | — | — |
| Engineering — Abutment dimensions | |||||
| Diameter of spacer sleeved a | max. 189 mm | — | — | — | — |
| Diameter of shaft abutmentd b | min. 209 mm | — | — | — | — |
| Diameter of housing abutmentD a | max. 274.2 mm | — | — | — | — |
| Radius of filletr a | max. 2.5 mm | — | — | — | — |
| Engineering — Associated products | |||||
| Angle ring | HJ 2232 EC | — | — | — | — |
| Engineering — Calculation data | |||||
| SKF performance class | SKF Explorer | — | — | — | — |
| Minimum load factork r | 0.3 | — | — | — | — |
| Limiting valuee | 0.3 | — | — | — | — |
| Calculation factorY | 0.4 | — | — | — | — |
| Engineering — Dimensions | |||||
| Shoulder diameter of inner ringd 1 | ≈ 205 mm | — | — | — | — |
| Shoulder diameter of outer ringD 1 | ≈ 251.1 mm | — | — | — | — |
| Raceway diameter of inner ringF | 193 mm | — | — | — | — |
| Chamfer dimensionr 1,2 | min. 3 mm | — | — | — | — |
| Chamfer dimensionr 3,4 | min. 3 mm | — | — | — | — |
| Permissible axial displacements | max. 4.5 mm | — | — | — | — |
| Load ratings — standard cage | |||||
| Basic dynamic radial load ratingCr | — | — | — | 995000 N | — |
| Basic static radial load ratingC0r | — | — | — | 1190000 N | — |
| Logistics | |||||
| Product net weight | 23.5 kg | — | — | — | — |
| eClass code | 23-05-09-01 | — | — | — | — |
| UNSPSC code | 31171505 | — | — | — | — |
| Lubrication-qualified speed — standard cage | |||||
| Thermal speed rating — oil bath | — | — | — | 2400 r/min | — |
| Mechanical limiting speed — forced oil circulation | — | — | — | 3600 r/min | — |
| Limiting speed — grease | — | — | — | 1900 r/min | — |
| Limiting speed — oil bath | — | — | — | 2400 r/min | — |
| Main Dimensions & Performance Data | |||||
| Basic dynamic load rating, radialCr | — | 940,000 N | — | — | — |
| Basic dynamic load rating, radialCr | — | 211,330.935 lbf | — | — | — |
| Basic static load rating, radialC0r | — | 1,170,000 N | — | — | — |
| Basic static load rating, radialC0r | — | 263,039.568 lbf | — | — | — |
| Fatigue load limit, radialCur | — | 187,000 N | — | — | — |
| Fatigue load limit, radialCur | — | 42,041.367 lbf | — | — | — |
| Manufacturer Identity | |||||
| Schaeffler Product Code | — | 371317 | — | — | — |
| Material Number | — | — | 000000000190016480 | — | — |
| Official Class Key | — | — | — | — | 040-010-000 |
| Base Type | — | NJ2232 | — | — | — |
| World Assembly Part Number | — | — | NJ2232EMA | — | — |
| Old Designation | — | ["NJ2232-E-M1","NJ2232E.M1"] | — | — | — |
| Inner Ring Part Number | — | — | 160ARJE22 | — | — |
| Gpsd Group | — | F01 | — | — | — |
| Outer Ring Part Number | — | — | 160ERUE22 | — | — |
| Product Line Id | — | 63 | — | — | — |
| Drawing Number | — | — | M101741 | — | — |
| X Life Marking | — | XL | — | — | — |
| Upc | — | — | 0087796300422 | — | — |
| Official Source System | — | — | CORE BP - DS DF | — | — |
| Official Last Run | — | — | 2026-08-23T20:02:48.51 | — | — |
| SAP material number | — | 0192243620000 | — | — | — |
| Base product | — | 2305090111 | — | — | — |
| Bearing X designation | — | NJ2232-E-XL-M1 | — | — | — |
| Mounting Manager ID | — | NJ2232-E-XL-M1 | — | — | — |
| Grease application ID | — | NJ2232-E-XL-M1 | — | — | — |
| Mounting dimensions | |||||
| Minimum diameter shaft shoulderda min | — | 174 mm | — | — | — |
| Minimum diameter shaft shoulderda min | — | 6.85 in | — | — | — |
| Maximum diameter of shaft shoulderda max | — | 192 mm | — | — | — |
| Maximum diameter of shaft shoulderda max | — | 7.559 in | — | — | — |
| Maximum diameter of housing shoulderDa max | — | 276 mm | — | — | — |
| Maximum diameter of housing shoulderDa max | — | 10.866 in | — | — | — |
| Minimum shaft shoulderdc min | — | 210 mm | — | — | — |
| Minimum shaft shoulderdc min | — | 8.268 in | — | — | — |
| Maximum recess radiusra max | — | 2.5 mm | — | — | — |
| Maximum recess radiusra max | — | 0.098 in | — | — | — |
| Mounting dimensions — shown arrangement | |||||
| Minimum shaft shoulder diameterdb min. | — | — | — | 173 mm | — |
| Maximum housing shoulder diameterDa max. | — | — | — | 277 mm | — |
| Maximum adjusting-ring diameter (NU/NJ arrangement)db max. | — | — | — | 188 mm | — |
| Maximum adjacent fillet radiusra max. | — | — | — | 2.5 mm | — |
| Maximum secondary adjacent fillet radiusrb max. | — | — | — | 2.5 mm | — |
| Product characteristics | |||||
| DesignE | — | Increased Capacity Design | — | — | — |
| Radial internal clearanceCN (Group N) | — | Normal internal clearance | — | — | — |
| Tolerance classPN | — | Normal (ISO 492:2023) | — | — | — |
| Number of rows1 | — | Single-row design | — | — | — |
| Product identity | |||||
| Official product category | Cylindrical roller bearings | — | — | — | — |
| Official taxonomy path | /products/rolling-bearings/roller-bearings/cylindrical-roller-bearings/single-row-cylindrical-roller-bearings | — | — | — | — |
| Structure group ID | BC1_001_101 | — | — | — | — |
| Available from SKF | Yes | — | — | — | — |
| Remanufacturable | No | — | — | — | — |
| Product Identity | |||||
| Construction | — | Cylindrical roller bearing NJ..-E-XL-M1, with cage, single row, semi-locating bearing, 2 ribs on outer ring, 1 rib on inner ring, type NJ | Single Row Cylindrical Roller Bearing | Imperial Series | 6.2992 in Bore | 11.4173 in OD | 3.1496 in Width | Open | Cylindrical Bore | Machined Window Brass Cage | C0 Clearance | — | — |
| Type Description | — | — | Cylindrical 1-Row | — | — |
| Short Description | — | Cylindrical roller bearing | — | — | — |
| Number Of Rows | 1 | — | 1 | — | — |
| Tapered Bore | — | — | N | — | — |
| Properties | |||||
| Bearing part | Complete bearing | — | — | — | — |
| Axial displacement capability | In one direction | — | — | — | — |
| Locating feature, bearing outer ring | Without | — | — | — | — |
| Bore type | Cylindrical | — | — | — | — |
| Number of flanges, outer ring | 2 | — | — | — | — |
| Number of flanges, inner ring | 1 | — | — | — | — |
| Loose flange | None | — | — | — | — |
| Radial internal clearance | CN | — | — | — | — |
| Tolerance class | Normal | — | — | — | — |
| Coating | Without | — | — | — | — |
| Relubrication feature | Without | — | — | — | — |
| Indicative carbon footprint for new product | 87.1 kg CO 2 e | — | — | — | — |
| Technical Data | |||||
| d | — | — | — | — | 290 mm |
| B | — | — | — | — | 80 mm |
| R(Min.) | — | — | — | — | 3 mm |
| R1(Min.) | — | — | — | — | 3 mm |
| Bore Diameter (D) | — | 160 mm | — | — | — |
| Overall Width | — | — | 0.000 mm | — | — |
| Fw | — | — | — | — | 195 mm |
| Outside Diamater (D) | — | 290 mm | — | — | — |
| Radial Rating | — | — | 919,000 N | — | — |
| Ew | — | — | — | — | - mm |
| Total Width (B) | — | 80 mm | — | — | — |
| Axial Rating | — | — | 0 N | — | — |
| Basic Load Ratings : Cr | — | — | — | — | 790 kN |
| Basic Dynamic Load Rating, Radial (Cr) | — | 940,000 N | — | — | — |
| Dynamic Rating C1 | — | — | 919,000 N | — | — |
| Basic Load Ratings : C0R | — | — | — | — | 939 kN |
| Basic Static Load Rating, Radial (C0R) | — | 1,170,000 N | — | — | — |
| Dynamic Rating C90 | — | — | 0 N | — | — |
| Fatigue Load Limit : Cu | — | — | — | — | 113 kN |
| Raceway Diameter Inner Ring (F) | — | 193 mm | — | — | — |
| Dynamic Axial Rating Ca90 | — | — | 0 N | — | — |
| Limiting Speeds(Grease Lub.) | — | — | — | — | 1800 min-1 |
| Operating Temperature Min. (Tmin) | — | -30 °C | — | — | — |
| Dynamic Axial Rating Ca1 | — | — | 0 N | — | — |
| Limiting Speeds(Oil Lub.) | — | — | — | — | 2500 min-1 |
| Minimum Diameter Shaft Shoulder (Da) | — | 174 mm | — | — | — |
| Static Radial Rating C0 | — | — | 1,210,000 N | — | — |
| Sd1 | — | — | — | — | - mm |
| Operating Temperature Max. (Tmax) | — | 150 °C | — | — | — |
| Extended Dynamic Rating Ce | — | — | 0 N | — | — |
| B1 | — | — | — | — | - mm |
| Limiting Speed (Limiting Spe) | — | 4,150 1/min | — | — | — |
| Static Axial Rating C0A | — | — | 0 N | — | — |
| B2 | — | — | — | — | - mm |
| Minimum Shaft Shoulder (Dc Min) | — | 210 mm | — | — | — |
| Da(Min.) | — | — | — | — | - mm |
| Reference Speed (Nϑr) | — | 1,660 1/min | — | — | — |
| Db(Min.) | — | — | — | — | - mm |
| Maximum Recess Radius (Ra Max) | — | 2.5 mm | — | — | — |
| Db(Max.) | — | — | — | — | - mm |
| Maximum Diameter Of Housing Shoulder (Da) | — | 276 mm | — | — | — |
| Dc(Min.) | — | — | — | — | - mm |
| Maximum Rib Diameter Inner Ring (D1) | — | 205.5 mm | — | — | — |
| Dd(Min.) | — | — | — | — | - mm |
| Minimum Chamfer Dimension (R1 Min) | — | 3 mm | — | — | — |
| Da(Max.) | — | — | — | — | 277 mm |
| Axial Displacement (S) | — | 7.2 mm | — | — | — |
| Minimum Rib Diameter Outer Ring (D1 Min) | — | 251.1 mm | — | — | — |
| Maximum Diameter Of Shaft Shoulder (Da Max) | — | 192 mm | — | — | — |
| Ra(Max.) | — | — | — | — | 2.5 mm |
| Minimum Chamfer Dimension (Rmin) | — | 3 mm | — | — | — |
| Rb(Max.) | — | — | — | — | 2.5 mm |
| Raceway Diameter Outer Ring (E) | — | 261 mm | — | — | — |
| Mass(Refer.) | — | — | — | — | 24.2 kg |
| Fatigue Load Limit, Radial (Cur) | — | 187,000 N | — | — | — |
| Temperature range | |||||
| Operating temperature min.Tmin | — | -30 °C | — | — | — |
| Operating temperature min.Tmin | — | -22 °F | — | — | — |
| Operating temperature max.Tmax | — | 150 °C | — | — | — |
| Operating temperature max.Tmax | — | 302 °F | — | — | — |
Automatic matching is a search aid, not an interchangeability declaration. Confirm the full suffix, tolerances, internal design and application limits before substitution.