Cross-brand designation analysis
COMPARE / VERIFY
Same-model Comparison
Explore products that share a base designation across loaded brands, with dimensional agreement and data gaps shown clearly.
Automatic candidate selection
One base designation across loaded brands
Exact designations rank first. Dimensions, suffixes and other technical differences remain visible so the result is not mistaken for an interchangeability declaration.
Dimensions verified
“NJ1076” across 2 loaded brands
At least two brands share the same bore, outside diameter and width. Use Custom Compare when you want to choose exact suffix variants yourself.
Technical comparison
Choose exact variants instead →Brand differences at a glance
| Parameter | SKFNJ 1076 MA380 × 560 × 82 mm | FAGNJ1076-M1380 × 560 × 82 mm |
|---|---|---|
| Comparable specifications | ||
| Brand | SKF | FAG |
| Designation | NJ 1076 MA | NJ1076-M1 |
| Product family | Cylindrical roller bearings | — |
| Detailed type | Single row cylindrical roller bearing, nj design | Cylindrical roller bearings |
| Series | — | NJ1076 |
| Bore diameterd | 380 mm | 380 mm |
| Outside diameterD | 560 mm | 560 mm |
| WidthB | 82 mm | 82 mm |
| Basic dynamic load ratingC | 1140 kN | 1170 kN |
| Basic static load ratingC0 | 1930 kN | 1990 kN |
| Fatigue load limitPu | 170 kN | 203 kN |
| Reference speednref | 1200 r/min | 1050 r/min |
| Limiting speednG | 1600 r/min | 1880 r/min |
| Mass≈m | 73 kg | 69.3 kg |
| Precision class | — | PN — Normal (ISO 492:2023) |
| Internal clearance | CN | CN (Group N) — Normal internal clearance |
| Sealing | Without | — |
| Cage | Machined brass | M1 — Two Piece Brass Cage Roller Guided |
| Lubricant | None | — |
| Minimum operating temperatureTmin | — | -30 °C |
| Maximum operating temperatureTmax | — | 150 °C |
| Capabilities & suitability | ||
| Radial load capacity | — | Yes |
| Axial load capacity in one direction | — | Yes |
| Suitable for grease lubrication | — | Yes |
| Suitable for oil lubrication | — | Yes |
| Unsealed design | — | Yes |
| Dimensions | ||
| Minimum chamfer dimensionrmin | — | 5 mm |
| Minimum chamfer dimensionrmin | — | 0.197 in |
| Minimum chamfer dimensionr1 min | — | 5 mm |
| Minimum chamfer dimensionr1 min | — | 0.197 in |
| Axial displacements | — | 9 mm |
| Axial displacements | — | 0.354 in |
| Raceway diameter outer ringE | — | 515 mm |
| Raceway diameter outer ringE | — | 20.276 in |
| Raceway diameter inner ringF | — | 425 mm |
| Raceway diameter inner ringF | — | 16.732 in |
| Minimum rib diameter outer ringD1 min | — | 497 mm |
| Minimum rib diameter outer ringD1 min | — | 19.567 in |
| Maximum rib diameter inner ringd1 | — | 443 mm |
| Maximum rib diameter inner ringd1 | — | 17.441 in |
| Engineering — Abutment dimensions | ||
| Diameter of spacer sleeved a | max. 420 mm | — |
| Diameter of shaft abutmentd b | min. 448 mm | — |
| Diameter of housing abutmentD a | max. 542 mm | — |
| Radius of filletr a | max. 4 mm | — |
| Engineering — Calculation data | ||
| Minimum load factork r | 0.15 | — |
| Limiting valuee | 0.2 | — |
| Calculation factorY | 0.6 | — |
| Engineering — Dimensions | ||
| Shoulder diameter of inner ringd 1 | ≈ 443 mm | — |
| Shoulder diameter of outer ringD 1 | ≈ 495 mm | — |
| Raceway diameter of inner ringF | 425 mm | — |
| Chamfer dimensionr 1,2 | min. 5 mm | — |
| Permissible axial displacements | max. 10.8 mm | — |
| Logistics | ||
| Product net weight | 73.0 kg | — |
| eClass code | 23-05-09-01 | — |
| UNSPSC code | 31171505 | — |
| Main Dimensions & Performance Data | ||
| Basic dynamic load rating, radialCr | — | 1,170,000 N |
| Basic dynamic load rating, radialCr | — | 263,039.568 lbf |
| Basic static load rating, radialC0r | — | 1,990,000 N |
| Basic static load rating, radialC0r | — | 447,392.086 lbf |
| Fatigue load limit, radialCur | — | 203,000 N |
| Fatigue load limit, radialCur | — | 45,638.489 lbf |
| Manufacturer Identity | ||
| Schaeffler Product Code | — | 372147 |
| Base Type | — | NJ1076 |
| Old Designation | — | ["NJ1076M1"] |
| Gpsd Group | — | F01 |
| Product Line Id | — | 75 |
| SAP material number | — | 0192207070000 |
| Base product | — | 2305090111 |
| Mounting dimensions | ||
| Minimum diameter shaft shoulderda min | — | 397 mm |
| Minimum diameter shaft shoulderda min | — | 15.63 in |
| Maximum diameter of shaft shoulderda max | — | 420 mm |
| Maximum diameter of shaft shoulderda max | — | 16.535 in |
| Maximum diameter of housing shoulderDa max | — | 543 mm |
| Maximum diameter of housing shoulderDa max | — | 21.378 in |
| Minimum shaft shoulderdc min | — | 447 mm |
| Minimum shaft shoulderdc min | — | 17.598 in |
| Maximum recess radiusra max | — | 4 mm |
| Maximum recess radiusra max | — | 0.157 in |
| Product characteristics | ||
| Design | — | Standard |
| Radial internal clearanceCN (Group N) | — | Normal internal clearance |
| Tolerance classPN | — | Normal (ISO 492:2023) |
| Number of rows1 | — | Single-row design |
| Product identity | ||
| Official product category | Cylindrical roller bearings | — |
| Official taxonomy path | /products/rolling-bearings/roller-bearings/cylindrical-roller-bearings/single-row-cylindrical-roller-bearings | — |
| Structure group ID | BC1_001_101 | — |
| Available from SKF | Yes | — |
| Remanufacturable | Yes | — |
| Product Identity | ||
| Construction | — | Cylindrical roller bearing NJ..-M1, with cage, single row, semi-locating bearing, 2 ribs on outer ring, 1 rib on inner ring, type NJ |
| Short Description | — | Cylindrical roller bearing |
| Properties | ||
| Bearing part | Complete bearing | — |
| Axial displacement capability | In one direction | — |
| Number of rows | 1 | — |
| Locating feature, bearing outer ring | Without | — |
| Bore type | Cylindrical | — |
| Number of flanges, outer ring | 2 | — |
| Number of flanges, inner ring | 1 | — |
| Loose flange | None | — |
| Radial internal clearance | CN | — |
| Tolerance class | Normal | — |
| Coating | Without | — |
| Relubrication feature | Without | — |
| Candidate for remanufacturing | Yes | — |
| Indicative carbon footprint for new product | 270.0 kg CO 2 e | — |
| Indicative carbon footprint for remanufactured product | 89.8 kg CO 2 e | — |
| Technical Data | ||
| Bore Diameter (D) | — | 380 mm |
| Outside Diamater (D) | — | 560 mm |
| Total Width (B) | — | 82 mm |
| Basic Dynamic Load Rating, Radial (Cr) | — | 1,170,000 N |
| Basic Static Load Rating, Radial (C0R) | — | 1,990,000 N |
| Raceway Diameter Inner Ring (F) | — | 425 mm |
| Operating Temperature Min. (Tmin) | — | -30 °C |
| Minimum Diameter Shaft Shoulder (Da) | — | 397 mm |
| Operating Temperature Max. (Tmax) | — | 150 °C |
| Limiting Speed (Limiting Spe) | — | 1,880 1/min |
| Minimum Shaft Shoulder (Dc Min) | — | 447 mm |
| Reference Speed (Nϑr) | — | 1,050 1/min |
| Maximum Recess Radius (Ra Max) | — | 4 mm |
| Maximum Diameter Of Housing Shoulder (Da) | — | 543 mm |
| Maximum Rib Diameter Inner Ring (D1) | — | 443 mm |
| Minimum Chamfer Dimension (R1 Min) | — | 5 mm |
| Axial Displacement (S) | — | 9 mm |
| Minimum Rib Diameter Outer Ring (D1 Min) | — | 497 mm |
| Maximum Diameter Of Shaft Shoulder (Da Max) | — | 420 mm |
| Minimum Chamfer Dimension (Rmin) | — | 5 mm |
| Raceway Diameter Outer Ring (E) | — | 515 mm |
| Fatigue Load Limit, Radial (Cur) | — | 203,000 N |
| Temperature range | ||
| Operating temperature min.Tmin | — | -30 °C |
| Operating temperature min.Tmin | — | -22 °F |
| Operating temperature max.Tmax | — | 150 °C |
| Operating temperature max.Tmax | — | 302 °F |
Automatic matching is a search aid, not an interchangeability declaration. Confirm the full suffix, tolerances, internal design and application limits before substitution.