Cross-brand designation analysis
COMPARE / VERIFY
Same-model Comparison
Explore products that share a base designation across loaded brands, with dimensional agreement and data gaps shown clearly.
Automatic candidate selection
One base designation across loaded brands
Exact designations rank first. Dimensions, suffixes and other technical differences remain visible so the result is not mistaken for an interchangeability declaration.
Dimensions verified
“NJ1064” across 3 loaded brands
At least two brands share the same bore, outside diameter and width. Use Custom Compare when you want to choose exact suffix variants yourself.
Technical comparison
Choose exact variants instead →Brand differences at a glance
| Parameter | SKFNJ 1064 MA320 × 480 × 74 mm | FAGNJ1064-M1320 × 480 × 74 mm | TIMKENNJ1064MA320 × 480 × 74 mm |
|---|---|---|---|
| Comparable specifications | |||
| Brand | SKF | FAG | TIMKEN |
| Designation | NJ 1064 MA | NJ1064-M1 | NJ1064MA |
| Product family | Cylindrical roller bearings | — | Cylindrical 1-Row |
| Detailed type | Single row cylindrical roller bearing, nj design | Cylindrical roller bearings | Cylindrical roller bearings |
| Series | — | NJ1064 | EX26210 |
| Bore diameterd | 320 mm | 320 mm | 320 mm |
| Outside diameterD | 480 mm | 480 mm | 480 mm |
| WidthB | 74 mm | 74 mm | 74 mm |
| Basic dynamic load ratingC | 880 kN | 910 kN | 1020 kN |
| Basic static load ratingC0 | 1430 kN | 1490 kN | 1500 kN |
| Fatigue load limitPu | 132 kN | 160 kN | — |
| Reference speednref | 1400 r/min | 1300 r/min | — |
| Limiting speednG | 1900 r/min | 2200 r/min | — |
| Mass≈m | 47.7 kg | 47.62 kg | 47.2 kg |
| Precision class | — | PN — Normal (ISO 492:2023) | — |
| Internal clearance | CN | CN (Group N) — Normal internal clearance | — |
| Sealing | Without | — | Open |
| Cage | Machined brass | M1 — Two Piece Brass Cage Roller Guided | Window Brass cage |
| Lubricant | None | — | — |
| Minimum operating temperatureTmin | — | -30 °C | — |
| Maximum operating temperatureTmax | — | 150 °C | — |
| Calculation Factors | |||
| K Factor | — | — | 0.00 |
| Y1 Factor | — | — | 0.00 |
| Y2 Factor | — | — | 0.00 |
| Y0 Factor | — | — | 0.00 |
| E Factor | — | — | 0.00 |
| Cg Factor | — | — | 0.1729 |
| Capabilities & suitability | |||
| Radial load capacity | — | Yes | — |
| Axial load capacity in one direction | — | Yes | — |
| Suitable for grease lubrication | — | Yes | — |
| Suitable for oil lubrication | — | Yes | — |
| Unsealed design | — | Yes | — |
| Dimensions | |||
| Minimum chamfer dimensionrmin | — | 4 mm | — |
| Minimum chamfer dimensionrmin | — | 0.157 in | — |
| Minimum chamfer dimensionr1 min | — | 4 mm | — |
| Minimum chamfer dimensionr1 min | — | 0.157 in | — |
| Axial displacements | — | 8 mm | — |
| Axial displacements | — | 0.315 in | — |
| Raceway diameter outer ringE | — | 440 mm | — |
| Raceway diameter outer ringE | — | 17.323 in | — |
| Raceway diameter inner ringF | — | 360 mm | — |
| Raceway diameter inner ringF | — | 14.173 in | — |
| Minimum rib diameter outer ringD1 min | — | 425.1 mm | — |
| Minimum rib diameter outer ringD1 min | — | 16.736 in | — |
| Maximum rib diameter inner ringd1 | — | 375.4 mm | — |
| Maximum rib diameter inner ringd1 | — | 14.78 in | — |
| Engineering — Abutment dimensions | |||
| Diameter of spacer sleeved a | max. 355 mm | — | — |
| Diameter of shaft abutmentd b | min. 380 mm | — | — |
| Diameter of housing abutmentD a | max. 465 mm | — | — |
| Radius of filletr a | max. 3 mm | — | — |
| Engineering — Calculation data | |||
| Minimum load factork r | 0.15 | — | — |
| Limiting valuee | 0.2 | — | — |
| Calculation factorY | 0.6 | — | — |
| Engineering — Dimensions | |||
| Shoulder diameter of inner ringd 1 | ≈ 376 mm | — | — |
| Shoulder diameter of outer ringD 1 | ≈ 422 mm | — | — |
| Raceway diameter of inner ringF | 360 mm | — | — |
| Chamfer dimensionr 1,2 | min. 4 mm | — | — |
| Permissible axial displacements | max. 6 mm | — | — |
| Logistics | |||
| Product net weight | 47.7 kg | — | — |
| eClass code | 23-05-09-01 | — | — |
| UNSPSC code | 31171505 | — | — |
| Main Dimensions & Performance Data | |||
| Basic dynamic load rating, radialCr | — | 910,000 N | — |
| Basic dynamic load rating, radialCr | — | 204,586.331 lbf | — |
| Basic static load rating, radialC0r | — | 1,490,000 N | — |
| Basic static load rating, radialC0r | — | 334,982.014 lbf | — |
| Fatigue load limit, radialCur | — | 160,000 N | — |
| Fatigue load limit, radialCur | — | 35,971.223 lbf | — |
| Manufacturer Identity | |||
| Schaeffler Product Code | — | 372138 | — |
| Material Number | — | — | 000000000190032619 |
| Base Type | — | NJ1064 | — |
| World Assembly Part Number | — | — | NJ1064MA |
| Old Designation | — | ["NJ1064M1"] | — |
| Inner Ring Part Number | — | — | 320ARJA10 |
| Gpsd Group | — | F01 | — |
| Outer Ring Part Number | — | — | 320ERUA10 |
| Product Line Id | — | 75 | — |
| Drawing Number | — | — | M946923 |
| Upc | — | — | 0013992356925 |
| Official Source System | — | — | CORE BP - DS DF |
| Official Last Run | — | — | 2026-08-23T20:02:47.753 |
| SAP material number | — | 0381923220000 | — |
| Base product | — | 2305090111 | — |
| Mounting dimensions | |||
| Minimum diameter shaft shoulderda min | — | 335 mm | — |
| Minimum diameter shaft shoulderda min | — | 13.189 in | — |
| Maximum diameter of shaft shoulderda max | — | 356 mm | — |
| Maximum diameter of shaft shoulderda max | — | 14.016 in | — |
| Maximum diameter of housing shoulderDa max | — | 465 mm | — |
| Maximum diameter of housing shoulderDa max | — | 18.307 in | — |
| Minimum shaft shoulderdc min | — | 380 mm | — |
| Minimum shaft shoulderdc min | — | 14.961 in | — |
| Maximum recess radiusra max | — | 3 mm | — |
| Maximum recess radiusra max | — | 0.118 in | — |
| Product characteristics | |||
| Design | — | Standard | — |
| Radial internal clearanceCN (Group N) | — | Normal internal clearance | — |
| Tolerance classPN | — | Normal (ISO 492:2023) | — |
| Number of rows1 | — | Single-row design | — |
| Product identity | |||
| Official product category | Cylindrical roller bearings | — | — |
| Official taxonomy path | /products/rolling-bearings/roller-bearings/cylindrical-roller-bearings/single-row-cylindrical-roller-bearings | — | — |
| Structure group ID | BC1_001_101 | — | — |
| Available from SKF | Yes | — | — |
| Remanufacturable | Yes | — | — |
| Product Identity | |||
| Construction | — | Cylindrical roller bearing NJ..-M1, with cage, single row, semi-locating bearing, 2 ribs on outer ring, 1 rib on inner ring, type NJ | Single Row Cylindrical Roller Bearing | Imperial Series | 12.5984 in Bore | 18.8976 in OD | 2.9134 in Width | Open | Cylindrical Bore | Machined Window Brass Cage | C0 Clearance |
| Short Description | — | Cylindrical roller bearing | — |
| Type Description | — | — | Cylindrical 1-Row |
| Number Of Rows | 1 | — | 1 |
| Tapered Bore | — | — | N |
| Properties | |||
| Bearing part | Complete bearing | — | — |
| Axial displacement capability | In one direction | — | — |
| Locating feature, bearing outer ring | Without | — | — |
| Bore type | Cylindrical | — | — |
| Number of flanges, outer ring | 2 | — | — |
| Number of flanges, inner ring | 1 | — | — |
| Loose flange | None | — | — |
| Radial internal clearance | CN | — | — |
| Tolerance class | Normal | — | — |
| Coating | Without | — | — |
| Relubrication feature | Without | — | — |
| Candidate for remanufacturing | Yes | — | — |
| Indicative carbon footprint for new product | 176.0 kg CO 2 e | — | — |
| Indicative carbon footprint for remanufactured product | 58.6 kg CO 2 e | — | — |
| Technical Data | |||
| Bore Diameter (D) | — | 320 mm | — |
| Outside Diamater (D) | — | 480 mm | — |
| Overall Width | — | — | 0.000 mm |
| Total Width (B) | — | 74 mm | — |
| Radial Rating | — | — | 1,020,000 N |
| Basic Dynamic Load Rating, Radial (Cr) | — | 910,000 N | — |
| Axial Rating | — | — | 0 N |
| Basic Static Load Rating, Radial (C0R) | — | 1,490,000 N | — |
| Dynamic Rating C1 | — | — | 1,020,000 N |
| Raceway Diameter Inner Ring (F) | — | 360 mm | — |
| Dynamic Rating C90 | — | — | 0 N |
| Operating Temperature Min. (Tmin) | — | -30 °C | — |
| Dynamic Axial Rating Ca90 | — | — | 0 N |
| Minimum Diameter Shaft Shoulder (Da) | — | 335 mm | — |
| Dynamic Axial Rating Ca1 | — | — | 0 N |
| Operating Temperature Max. (Tmax) | — | 150 °C | — |
| Static Radial Rating C0 | — | — | 1,500,000 N |
| Limiting Speed (Limiting Spe) | — | 2,200 1/min | — |
| Extended Dynamic Rating Ce | — | — | 0 N |
| Minimum Shaft Shoulder (Dc Min) | — | 380 mm | — |
| Static Axial Rating C0A | — | — | 0 N |
| Reference Speed (Nϑr) | — | 1,300 1/min | — |
| Maximum Recess Radius (Ra Max) | — | 3 mm | — |
| Maximum Diameter Of Housing Shoulder (Da) | — | 465 mm | — |
| Maximum Rib Diameter Inner Ring (D1) | — | 375.4 mm | — |
| Minimum Chamfer Dimension (R1 Min) | — | 4 mm | — |
| Axial Displacement (S) | — | 8 mm | — |
| Minimum Rib Diameter Outer Ring (D1 Min) | — | 425.1 mm | — |
| Maximum Diameter Of Shaft Shoulder (Da Max) | — | 356 mm | — |
| Minimum Chamfer Dimension (Rmin) | — | 4 mm | — |
| Raceway Diameter Outer Ring (E) | — | 440 mm | — |
| Fatigue Load Limit, Radial (Cur) | — | 160,000 N | — |
| Temperature range | |||
| Operating temperature min.Tmin | — | -30 °C | — |
| Operating temperature min.Tmin | — | -22 °F | — |
| Operating temperature max.Tmax | — | 150 °C | — |
| Operating temperature max.Tmax | — | 302 °F | — |
Automatic matching is a search aid, not an interchangeability declaration. Confirm the full suffix, tolerances, internal design and application limits before substitution.