Cross-brand designation analysis
COMPARE / VERIFY
Same-model Comparison
Explore products that share a base designation across loaded brands, with dimensional agreement and data gaps shown clearly.
Automatic candidate selection
One base designation across loaded brands
Exact designations rank first. Dimensions, suffixes and other technical differences remain visible so the result is not mistaken for an interchangeability declaration.
Designation candidates
“NJ1060” across 2 loaded brands
One highest-ranked designation candidate is shown per manufacturer. Use Custom Compare when you want to choose exact suffix variants yourself.
Technical comparison
Choose exact variants instead →Brand differences at a glance
| Parameter | SKFNJ 1060 MA300 × 460 × 74 mm | NSKNJ1060300 × 460 × 74 mm |
|---|---|---|
| Comparable specifications | ||
| Brand | SKF | NSK |
| Designation | NJ 1060 MA | NJ1060 |
| Product family | Cylindrical roller bearings | Cylindrical roller bearing |
| Detailed type | Single row cylindrical roller bearing, nj design | Cylindrical roller bearings |
| Bore diameterd | 300 mm | 300 mm |
| Outside diameterD | 460 mm | 460 mm |
| WidthB | 74 mm | 74 mm |
| Basic dynamic load ratingC | 858 kN | 1090 kN |
| Basic static load ratingC0 | 1370 kN | 1400 kN |
| Fatigue load limitPu | 129 kN | — |
| Reference speednref | 1500 r/min | — |
| Limiting speednG | 2000 r/min | — |
| Mass≈m | 43.2 kg | — |
| Internal clearance | CN | — |
| Sealing | Without | — |
| Cage | Machined brass | Machined brass |
| Lubricant | None | — |
| Boundary dimensions | ||
| Bearing widthB | — | 74 mm |
| Minimum bearing chamferr min. | — | 4 mm |
| Minimum secondary bearing chamferr1 min. | — | 4 mm |
| Roller inscribed circle diameterFw | — | 340 mm |
| Catalogue reference mass | ||
| Approximate shared-row mass — not separately stated for each rib arrangement | — | 43.7 kg |
| Construction | ||
| Single-row construction type | — | NJ |
| Rib arrangement | — | Two outer-ring ribs; one inner-ring rib |
| Standard cage material | — | Machined brass |
| Standard cage marking | — | M is usually omitted for this series |
| Other cage codes listed for this catalogue row | — | None listed in this row |
| Precision — designation omission rule | — | ISO Normal when no precision suffix is specified |
| Clearance identification — verify interchangeability | — | No clearance suffix shown. CN omission applies to interchangeable designs; do not infer a numerical clearance. |
| Optimized crowning note | — | No optimized-crowning asterisk on this row |
| Engineering — Abutment dimensions | ||
| Diameter of spacer sleeved a | max. 335 mm | — |
| Diameter of shaft abutmentd b | min. 360 mm | — |
| Diameter of housing abutmentD a | max. 443 mm | — |
| Radius of filletr a | max. 3 mm | — |
| Engineering — Calculation data | ||
| SKF performance class | SKF Explorer | — |
| Minimum load factork r | 0.1 | — |
| Limiting valuee | 0.2 | — |
| Calculation factorY | 0.6 | — |
| Engineering — Dimensions | ||
| Shoulder diameter of inner ringd 1 | ≈ 356 mm | — |
| Shoulder diameter of outer ringD 1 | ≈ 402 mm | — |
| Raceway diameter of inner ringF | 340 mm | — |
| Chamfer dimensionr 1,2 | min. 4 mm | — |
| Permissible axial displacements | max. 4 mm | — |
| Load ratings — standard cage | ||
| Basic dynamic radial load ratingCr | — | 1090000 N |
| Basic static radial load ratingC0r | — | 1400000 N |
| Logistics | ||
| Product net weight | 43.2 kg | — |
| eClass code | 23-05-09-01 | — |
| UNSPSC code | 31171505 | — |
| Lubrication-qualified speed — standard cage | ||
| Thermal speed rating — oil bath | — | 1600 r/min |
| Mechanical limiting speed — forced oil circulation | — | Not stated in this catalogue row |
| Limiting speed — grease | — | 1300 r/min |
| Limiting speed — oil bath | — | 1500 r/min |
| Mounting dimensions — shown arrangement | ||
| Minimum shaft shoulder diameterdb min. | — | 316 mm |
| Maximum housing shoulder diameterDa max. | — | 444 mm |
| Maximum adjusting-ring diameter (NU/NJ arrangement)db max. | — | 336 mm |
| Maximum adjacent fillet radiusra max. | — | 3 mm |
| Maximum secondary adjacent fillet radiusrb max. | — | 3 mm |
| Product identity | ||
| Official product category | Cylindrical roller bearings | — |
| Official taxonomy path | /products/rolling-bearings/roller-bearings/cylindrical-roller-bearings/single-row-cylindrical-roller-bearings | — |
| Structure group ID | BC1_001_101 | — |
| Available from SKF | Yes | — |
| Remanufacturable | Yes | — |
| Properties | ||
| Bearing part | Complete bearing | — |
| Axial displacement capability | In one direction | — |
| Number of rows | 1 | — |
| Locating feature, bearing outer ring | Without | — |
| Bore type | Cylindrical | — |
| Number of flanges, outer ring | 2 | — |
| Number of flanges, inner ring | 1 | — |
| Loose flange | None | — |
| Radial internal clearance | CN | — |
| Tolerance class | Normal | — |
| Coating | Without | — |
| Relubrication feature | Without | — |
| Candidate for remanufacturing | Yes | — |
| Indicative carbon footprint for new product | 160.0 kg CO 2 e | — |
| Indicative carbon footprint for remanufactured product | 53.1 kg CO 2 e | — |
Automatic matching is a search aid, not an interchangeability declaration. Confirm the full suffix, tolerances, internal design and application limits before substitution.