Cross-brand designation analysis
COMPARE / VERIFY
Same-model Comparison
Explore products that share a base designation across loaded brands, with dimensional agreement and data gaps shown clearly.
Cross Reference centre · Interchange verification checklist · Understand suffix differences
You entered NJ1026-XL-M1. This table explores the base group NJ1026; it does not preserve or approve every requested suffix. Search your complete marking first →
Automatic candidate selection
One base designation across loaded brands
Exact designations rank first. Dimensions, suffixes and other technical differences remain visible so the result is not mistaken for an interchangeability declaration.
Dimensions verified
“NJ1026” across 3 loaded brands
At least two brands share the same bore, outside diameter and width. Use Custom Compare when you want to choose exact suffix variants yourself.
Technical comparison
Choose exact variants instead →Brand differences at a glance
| Parameter | SKFNJ 1026 M/C4VA301130 × 200 × 33 mm | FAGNJ1026-XL-M1130 × 200 × 33 mm | NSKNJ1026130 × 200 × 33 mm |
|---|---|---|---|
| Comparable specifications | |||
| Brand | SKF | FAG | NSK |
| Designation | NJ 1026 M/C4VA301 | NJ1026-XL-M1 | NJ1026 |
| Product family | Cylindrical roller bearings | — | Cylindrical roller bearing |
| Detailed type | Single row cylindrical roller bearing, nj design | Cylindrical roller bearings | Cylindrical roller bearings |
| Series | — | NJ1026 | — |
| Bore diameterd | 130 mm | 130 mm | 130 mm |
| Outside diameterD | 200 mm | 200 mm | 200 mm |
| WidthB | 33 mm | 33 mm | 33 mm |
| Basic dynamic load ratingC | 186 kN | 212 kN | 211 kN |
| Basic static load ratingC0 | 224 kN | 250 kN | 238 kN |
| Fatigue load limitPu | — | 39.5 kN | — |
| Reference speednref | 3800 r/min | 3500 r/min | — |
| Limiting speednG | 3800 r/min | 6500 r/min | — |
| Mass≈m | 3.75 kg | 3.81 kg | — |
| Precision class | — | PN — Normal (ISO 492:2023) | — |
| Internal clearance | C4 | CN (Group N) — Normal internal clearance | — |
| Sealing | Without | — | — |
| Cage | Machined brass | M1 — Two Piece Brass Cage Roller Guided | Machined brass |
| Lubricant | None | — | — |
| Minimum operating temperatureTmin | — | -30 °C | — |
| Maximum operating temperatureTmax | — | 150 °C | — |
| Boundary dimensions | |||
| Bearing widthB | — | — | 33 mm |
| Minimum bearing chamferr min. | — | — | 2 mm |
| Minimum secondary bearing chamferr1 min. | — | — | 1.1 mm |
| Roller inscribed circle diameterFw | — | — | 148 mm |
| Capabilities & suitability | |||
| Radial load capacity | — | Yes | — |
| Axial load capacity in one direction | — | Yes | — |
| Suitable for grease lubrication | — | Yes | — |
| Suitable for oil lubrication | — | Yes | — |
| Unsealed design | — | Yes | — |
| Catalogue reference mass | |||
| Approximate shared-row mass — not separately stated for each rib arrangement | — | — | 3.66 kg |
| Construction | |||
| Single-row construction type | — | — | NJ |
| Rib arrangement | — | — | Two outer-ring ribs; one inner-ring rib |
| Standard cage material | — | — | Machined brass |
| Standard cage marking | — | — | M is usually omitted for this series |
| Other cage codes listed for this catalogue row | — | — | None listed in this row |
| Precision — designation omission rule | — | — | ISO Normal when no precision suffix is specified |
| Clearance identification — verify interchangeability | — | — | No clearance suffix shown. CN omission applies to interchangeable designs; do not infer a numerical clearance. |
| Optimized crowning note | — | — | No optimized-crowning asterisk on this row |
| Dimensions | |||
| Minimum chamfer dimensionrmin | — | 2 mm | — |
| Minimum chamfer dimensionrmin | — | 0.079 in | — |
| Minimum chamfer dimensionr1 min | — | 1.1 mm | — |
| Minimum chamfer dimensionr1 min | — | 0.043 in | — |
| Axial displacements | — | 3.9 mm | — |
| Axial displacements | — | 0.154 in | — |
| Raceway diameter outer ringE | — | 182 mm | — |
| Raceway diameter outer ringE | — | 7.165 in | — |
| Raceway diameter inner ringF | — | 148 mm | — |
| Raceway diameter inner ringF | — | 5.827 in | — |
| Minimum rib diameter outer ringD1 min | — | 175.9 mm | — |
| Minimum rib diameter outer ringD1 min | — | 6.925 in | — |
| Maximum rib diameter inner ringd1 | — | 154.6 mm | — |
| Maximum rib diameter inner ringd1 | — | 6.087 in | — |
| Load ratings — standard cage | |||
| Basic dynamic radial load ratingCr | — | — | 211000 N |
| Basic static radial load ratingC0r | — | — | 238000 N |
| Logistics | |||
| Product net weight | 3.75 kg | — | — |
| eClass code | 23-05-09-01 | — | — |
| UNSPSC code | 31171505 | — | — |
| Lubrication-qualified speed — standard cage | |||
| Thermal speed rating — oil bath | — | — | 4000 r/min |
| Mechanical limiting speed — forced oil circulation | — | — | Not stated in this catalogue row |
| Limiting speed — grease | — | — | 3200 r/min |
| Limiting speed — oil bath | — | — | 3800 r/min |
| Main Dimensions & Performance Data | |||
| Basic dynamic load rating, radialCr | — | 212,000 N | — |
| Basic dynamic load rating, radialCr | — | 47,661.871 lbf | — |
| Basic static load rating, radialC0r | — | 250,000 N | — |
| Basic static load rating, radialC0r | — | 56,205.036 lbf | — |
| Fatigue load limit, radialCur | — | 39,500 N | — |
| Fatigue load limit, radialCur | — | 8,880.396 lbf | — |
| Manufacturer Identity | |||
| Schaeffler Product Code | — | 372183 | — |
| Base Type | — | NJ1026 | — |
| Old Designation | — | ["NJ1026-M1"] | — |
| Gpsd Group | — | F01 | — |
| Product Line Id | — | 63 | — |
| X Life Marking | — | XL | — |
| SAP material number | — | 0192204050000 | — |
| Base product | — | 2305090111 | — |
| Bearing X designation | — | NJ1026-XL-M1 | — |
| Mounting Manager ID | — | NJ1026-XL-M1 | — |
| Grease application ID | — | NJ1026-XL-M1 | — |
| Mounting dimensions | |||
| Minimum diameter shaft shoulderda min | — | 136 mm | — |
| Minimum diameter shaft shoulderda min | — | 5.354 in | — |
| Maximum diameter of shaft shoulderda max | — | 146 mm | — |
| Maximum diameter of shaft shoulderda max | — | 5.748 in | — |
| Maximum diameter of housing shoulderDa max | — | 191 mm | — |
| Maximum diameter of housing shoulderDa max | — | 7.52 in | — |
| Minimum shaft shoulderdc min | — | 157 mm | — |
| Minimum shaft shoulderdc min | — | 6.181 in | — |
| Maximum recess radiusra max | — | 2 mm | — |
| Maximum recess radiusra max | — | 0.079 in | — |
| Mounting dimensions — shown arrangement | |||
| Minimum shaft shoulder diameterdb min. | — | — | 136.5 mm |
| Maximum housing shoulder diameterDa max. | — | — | 191 mm |
| Maximum adjusting-ring diameter (NU/NJ arrangement)db max. | — | — | 146 mm |
| Maximum adjacent fillet radiusra max. | — | — | 2 mm |
| Maximum secondary adjacent fillet radiusrb max. | — | — | 1 mm |
| Performance | |||
| SKF performance class | SKF Explorer | — | — |
| Product characteristics | |||
| Design | — | Standard | — |
| Radial internal clearanceCN (Group N) | — | Normal internal clearance | — |
| Tolerance classPN | — | Normal (ISO 492:2023) | — |
| Number of rows1 | — | Single-row design | — |
| Product identity | |||
| Official product category | Cylindrical roller bearings | — | — |
| Official taxonomy path | /products/rolling-bearings/roller-bearings/cylindrical-roller-bearings/single-row-cylindrical-roller-bearings | — | — |
| Structure group ID | BC1_001_101 | — | — |
| Available from SKF | Yes | — | — |
| Remanufacturable | No | — | — |
| Product Identity | |||
| Construction | — | Cylindrical roller bearing NJ..-XL-M1, with cage, single row, semi-locating bearing, 2 ribs on outer ring, 1 rib on inner ring, type NJ | — |
| Short Description | — | Cylindrical roller bearing | — |
| Properties | |||
| Bearing part | Complete bearing | — | — |
| Axial displacement capability | In one direction | — | — |
| Number of rows | 1 | — | — |
| Locating feature, bearing outer ring | Without | — | — |
| Bore type | Cylindrical | — | — |
| Number of flanges, outer ring | 2 | — | — |
| Number of flanges, inner ring | 1 | — | — |
| Loose flange | None | — | — |
| Radial internal clearance | C4 | — | — |
| Tolerance class | Normal | — | — |
| Coating | Without | — | — |
| Relubrication feature | Without | — | — |
| Indicative carbon footprint for new product | 13.9 kg CO 2 e | — | — |
| Technical Data | |||
| Bore Diameter (D) | — | 130 mm | — |
| Outside Diamater (D) | — | 200 mm | — |
| Total Width (B) | — | 33 mm | — |
| Basic Dynamic Load Rating, Radial (Cr) | — | 212,000 N | — |
| Basic Static Load Rating, Radial (C0R) | — | 250,000 N | — |
| Raceway Diameter Inner Ring (F) | — | 148 mm | — |
| Operating Temperature Min. (Tmin) | — | -30 °C | — |
| Minimum Diameter Shaft Shoulder (Da) | — | 136 mm | — |
| Operating Temperature Max. (Tmax) | — | 150 °C | — |
| Limiting Speed (Limiting Spe) | — | 6,500 1/min | — |
| Minimum Shaft Shoulder (Dc Min) | — | 157 mm | — |
| Reference Speed (Nϑr) | — | 3,500 1/min | — |
| Maximum Recess Radius (Ra Max) | — | 2 mm | — |
| Maximum Diameter Of Housing Shoulder (Da) | — | 191 mm | — |
| Maximum Rib Diameter Inner Ring (D1) | — | 154.6 mm | — |
| Minimum Chamfer Dimension (R1 Min) | — | 1.1 mm | — |
| Axial Displacement (S) | — | 3.9 mm | — |
| Minimum Rib Diameter Outer Ring (D1 Min) | — | 175.9 mm | — |
| Maximum Diameter Of Shaft Shoulder (Da Max) | — | 146 mm | — |
| Minimum Chamfer Dimension (Rmin) | — | 2 mm | — |
| Raceway Diameter Outer Ring (E) | — | 182 mm | — |
| Fatigue Load Limit, Radial (Cur) | — | 39,500 N | — |
| Temperature range | |||
| Operating temperature min.Tmin | — | -30 °C | — |
| Operating temperature min.Tmin | — | -22 °F | — |
| Operating temperature max.Tmax | — | 150 °C | — |
| Operating temperature max.Tmax | — | 302 °F | — |
Automatic matching is a search aid, not an interchangeability declaration. Confirm the full suffix, tolerances, internal design and application limits before substitution.