Cross-brand designation analysis
COMPARE / VERIFY
Same-model Comparison
Explore products that share a base designation across loaded brands, with dimensional agreement and data gaps shown clearly.
Automatic candidate selection
One base designation across loaded brands
Exact designations rank first. Dimensions, suffixes and other technical differences remain visible so the result is not mistaken for an interchangeability declaration.
Designation candidates
“NJ1022” across 2 loaded brands
One highest-ranked designation candidate is shown per manufacturer. Use Custom Compare when you want to choose exact suffix variants yourself.
Technical comparison
Choose exact variants instead →Brand differences at a glance
| Parameter | FAGNJ1022-XL-M1110 × 170 × 28 mm | NSKNJ1022110 × 170 × 28 mm |
|---|---|---|
| Comparable specifications | ||
| Brand | FAG | NSK |
| Designation | NJ1022-XL-M1 | NJ1022 |
| Product family | — | Cylindrical roller bearing |
| Detailed type | Cylindrical roller bearings | Cylindrical roller bearings |
| Series | NJ1022 | — |
| Bore diameterd | 110 mm | 110 mm |
| Outside diameterD | 170 mm | 170 mm |
| WidthB | 28 mm | 28 mm |
| Basic dynamic load ratingC | 167 kN | 161 kN |
| Basic static load ratingC0 | 191 kN | 174 kN |
| Fatigue load limitPu | 30.5 kN | — |
| Reference speednref | 3850 r/min | — |
| Limiting speednG | 7700 r/min | — |
| Mass≈m | 2.315 kg | — |
| Precision class | PN — Normal (ISO 492:2023) | — |
| Internal clearance | CN (Group N) — Normal internal clearance | — |
| Cage | M1 — Two Piece Brass Cage Roller Guided | Machined brass |
| Minimum operating temperatureTmin | -30 °C | — |
| Maximum operating temperatureTmax | 150 °C | — |
| Boundary dimensions | ||
| Bearing widthB | — | 28 mm |
| Minimum bearing chamferr min. | — | 2 mm |
| Minimum secondary bearing chamferr1 min. | — | 1.1 mm |
| Roller inscribed circle diameterFw | — | 125 mm |
| Capabilities & suitability | ||
| Radial load capacity | Yes | — |
| Axial load capacity in one direction | Yes | — |
| Suitable for grease lubrication | Yes | — |
| Suitable for oil lubrication | Yes | — |
| Unsealed design | Yes | — |
| Catalogue reference mass | ||
| Approximate shared-row mass — not separately stated for each rib arrangement | — | 2.27 kg |
| Construction | ||
| Single-row construction type | — | NJ |
| Rib arrangement | — | Two outer-ring ribs; one inner-ring rib |
| Standard cage material | — | Machined brass |
| Standard cage marking | — | M is usually omitted for this series |
| Other cage codes listed for this catalogue row | — | None listed in this row |
| Precision — designation omission rule | — | ISO Normal when no precision suffix is specified |
| Clearance identification — verify interchangeability | — | No clearance suffix shown. CN omission applies to interchangeable designs; do not infer a numerical clearance. |
| Optimized crowning note | — | No optimized-crowning asterisk on this row |
| Dimensions | ||
| Minimum chamfer dimensionrmin | 2 mm | — |
| Minimum chamfer dimensionrmin | 0.079 in | — |
| Minimum chamfer dimensionr1 min | 1.1 mm | — |
| Minimum chamfer dimensionr1 min | 0.043 in | — |
| Axial displacements | 3.2 mm | — |
| Axial displacements | 0.126 in | — |
| Raceway diameter outer ringE | 155 mm | — |
| Raceway diameter outer ringE | 6.102 in | — |
| Raceway diameter inner ringF | 125 mm | — |
| Raceway diameter inner ringF | 4.921 in | — |
| Minimum rib diameter outer ringD1 min | 149.7 mm | — |
| Minimum rib diameter outer ringD1 min | 5.894 in | — |
| Maximum rib diameter inner ringd1 | 130.8 mm | — |
| Maximum rib diameter inner ringd1 | 5.15 in | — |
| Load ratings — standard cage | ||
| Basic dynamic radial load ratingCr | — | 161000 N |
| Basic static radial load ratingC0r | — | 174000 N |
| Lubrication-qualified speed — standard cage | ||
| Thermal speed rating — oil bath | — | 4500 r/min |
| Mechanical limiting speed — forced oil circulation | — | Not stated in this catalogue row |
| Limiting speed — grease | — | 3800 r/min |
| Limiting speed — oil bath | — | 4500 r/min |
| Main Dimensions & Performance Data | ||
| Basic dynamic load rating, radialCr | 167,000 N | — |
| Basic dynamic load rating, radialCr | 37,544.964 lbf | — |
| Basic static load rating, radialC0r | 191,000 N | — |
| Basic static load rating, radialC0r | 42,940.647 lbf | — |
| Fatigue load limit, radialCur | 30,500 N | — |
| Fatigue load limit, radialCur | 6,857.014 lbf | — |
| Manufacturer Identity | ||
| Schaeffler Product Code | 372177 | — |
| Base Type | NJ1022 | — |
| Old Designation | ["NJ1022-M1"] | — |
| Gpsd Group | F01 | — |
| Product Line Id | 63 | — |
| X Life Marking | XL | — |
| SAP material number | 0192203320000 | — |
| Base product | 2305090111 | — |
| Bearing X designation | NJ1022-XL-M1 | — |
| Mounting Manager ID | NJ1022-XL-M1 | — |
| Grease application ID | NJ1022-XL-M1 | — |
| Mounting dimensions | ||
| Minimum diameter shaft shoulderda min | 116 mm | — |
| Minimum diameter shaft shoulderda min | 4.567 in | — |
| Maximum diameter of shaft shoulderda max | 124 mm | — |
| Maximum diameter of shaft shoulderda max | 4.882 in | — |
| Maximum diameter of housing shoulderDa max | 161 mm | — |
| Maximum diameter of housing shoulderDa max | 6.339 in | — |
| Minimum shaft shoulderdc min | 133 mm | — |
| Minimum shaft shoulderdc min | 5.236 in | — |
| Maximum recess radiusra max | 2 mm | — |
| Maximum recess radiusra max | 0.079 in | — |
| Mounting dimensions — shown arrangement | ||
| Minimum shaft shoulder diameterdb min. | — | 116.5 mm |
| Maximum housing shoulder diameterDa max. | — | 161 mm |
| Maximum adjusting-ring diameter (NU/NJ arrangement)db max. | — | 123 mm |
| Maximum adjacent fillet radiusra max. | — | 2 mm |
| Maximum secondary adjacent fillet radiusrb max. | — | 1 mm |
| Product characteristics | ||
| Design | Standard | — |
| Radial internal clearanceCN (Group N) | Normal internal clearance | — |
| Tolerance classPN | Normal (ISO 492:2023) | — |
| Number of rows1 | Single-row design | — |
| Product Identity | ||
| Construction | Cylindrical roller bearing NJ..-XL-M1, with cage, single row, semi-locating bearing, 2 ribs on outer ring, 1 rib on inner ring, type NJ | — |
| Short Description | Cylindrical roller bearing | — |
| Technical Data | ||
| Bore Diameter (D) | 110 mm | — |
| Outside Diamater (D) | 170 mm | — |
| Total Width (B) | 28 mm | — |
| Basic Dynamic Load Rating, Radial (Cr) | 167,000 N | — |
| Basic Static Load Rating, Radial (C0R) | 191,000 N | — |
| Raceway Diameter Inner Ring (F) | 125 mm | — |
| Operating Temperature Min. (Tmin) | -30 °C | — |
| Minimum Diameter Shaft Shoulder (Da) | 116 mm | — |
| Operating Temperature Max. (Tmax) | 150 °C | — |
| Limiting Speed (Limiting Spe) | 7,700 1/min | — |
| Minimum Shaft Shoulder (Dc Min) | 133 mm | — |
| Reference Speed (Nϑr) | 3,850 1/min | — |
| Maximum Recess Radius (Ra Max) | 2 mm | — |
| Maximum Diameter Of Housing Shoulder (Da) | 161 mm | — |
| Maximum Rib Diameter Inner Ring (D1) | 130.8 mm | — |
| Minimum Chamfer Dimension (R1 Min) | 1.1 mm | — |
| Axial Displacement (S) | 3.2 mm | — |
| Minimum Rib Diameter Outer Ring (D1 Min) | 149.7 mm | — |
| Maximum Diameter Of Shaft Shoulder (Da Max) | 124 mm | — |
| Minimum Chamfer Dimension (Rmin) | 2 mm | — |
| Raceway Diameter Outer Ring (E) | 155 mm | — |
| Fatigue Load Limit, Radial (Cur) | 30,500 N | — |
| Temperature range | ||
| Operating temperature min.Tmin | -30 °C | — |
| Operating temperature min.Tmin | -22 °F | — |
| Operating temperature max.Tmax | 150 °C | — |
| Operating temperature max.Tmax | 302 °F | — |
Automatic matching is a search aid, not an interchangeability declaration. Confirm the full suffix, tolerances, internal design and application limits before substitution.