Cross-brand designation analysis
COMPARE / VERIFY
Same-model Comparison
Explore products that share a base designation across loaded brands, with dimensional agreement and data gaps shown clearly.
Cross Reference centre · Interchange verification checklist · Understand suffix differences
You entered NJ1020-XL-M1. This table explores the base group NJ1020; it does not preserve or approve every requested suffix. Search your complete marking first →
Automatic candidate selection
One base designation across loaded brands
Exact designations rank first. Dimensions, suffixes and other technical differences remain visible so the result is not mistaken for an interchangeability declaration.
Designation candidates
“NJ1020” across 2 loaded brands
One highest-ranked designation candidate is shown per manufacturer. Use Custom Compare when you want to choose exact suffix variants yourself.
Technical comparison
Choose exact variants instead →Brand differences at a glance
| Parameter | FAGNJ1020-XL-M1100 × 150 × 24 mm | NSKNJ1020100 × 150 × 24 mm |
|---|---|---|
| Comparable specifications | ||
| Brand | FAG | NSK |
| Designation | NJ1020-XL-M1 | NJ1020 |
| Product family | — | Cylindrical roller bearing |
| Detailed type | Cylindrical roller bearings | Cylindrical roller bearings |
| Series | NJ1020 | — |
| Bore diameterd | 100 mm | 100 mm |
| Outside diameterD | 150 mm | 150 mm |
| WidthB | 24 mm | 24 mm |
| Basic dynamic load ratingC | 116 kN | 114 kN |
| Basic static load ratingC0 | 135 kN | 126 kN |
| Fatigue load limitPu | 21.2 kN | — |
| Reference speednref | 4150 r/min | — |
| Limiting speednG | 9000 r/min | — |
| Mass≈m | 1.48 kg | — |
| Precision class | PN — Normal (ISO 492:2023) | — |
| Internal clearance | CN (Group N) — Normal internal clearance | — |
| Cage | M1 — Two Piece Brass Cage Roller Guided | Machined brass |
| Minimum operating temperatureTmin | -30 °C | — |
| Maximum operating temperatureTmax | 150 °C | — |
| Boundary dimensions | ||
| Bearing widthB | — | 24 mm |
| Minimum bearing chamferr min. | — | 1.5 mm |
| Minimum secondary bearing chamferr1 min. | — | 1.1 mm |
| Roller inscribed circle diameterFw | — | 113 mm |
| Capabilities & suitability | ||
| Radial load capacity | Yes | — |
| Axial load capacity in one direction | Yes | — |
| Suitable for grease lubrication | Yes | — |
| Suitable for oil lubrication | Yes | — |
| Unsealed design | Yes | — |
| Catalogue reference mass | ||
| Approximate shared-row mass — not separately stated for each rib arrangement | — | 1.47 kg |
| Construction | ||
| Single-row construction type | — | NJ |
| Rib arrangement | — | Two outer-ring ribs; one inner-ring rib |
| Standard cage material | — | Machined brass |
| Standard cage marking | — | M is usually omitted for this series |
| Other cage codes listed for this catalogue row | — | None listed in this row |
| Precision — designation omission rule | — | ISO Normal when no precision suffix is specified |
| Clearance identification — verify interchangeability | — | No clearance suffix shown. CN omission applies to interchangeable designs; do not infer a numerical clearance. |
| Optimized crowning note | — | No optimized-crowning asterisk on this row |
| Dimensions | ||
| Minimum chamfer dimensionrmin | 1.5 mm | — |
| Minimum chamfer dimensionrmin | 0.059 in | — |
| Minimum chamfer dimensionr1 min | 1.1 mm | — |
| Minimum chamfer dimensionr1 min | 0.043 in | — |
| Axial displacements | 2.9 mm | — |
| Axial displacements | 0.114 in | — |
| Raceway diameter outer ringE | 137 mm | — |
| Raceway diameter outer ringE | 5.394 in | — |
| Raceway diameter inner ringF | 113 mm | — |
| Raceway diameter inner ringF | 4.449 in | — |
| Minimum rib diameter outer ringD1 min | 132.85 mm | — |
| Minimum rib diameter outer ringD1 min | 5.23 in | — |
| Maximum rib diameter inner ringd1 | 117.6 mm | — |
| Maximum rib diameter inner ringd1 | 4.63 in | — |
| Load ratings — standard cage | ||
| Basic dynamic radial load ratingCr | — | 114000 N |
| Basic static radial load ratingC0r | — | 126000 N |
| Lubrication-qualified speed — standard cage | ||
| Thermal speed rating — oil bath | — | 4800 r/min |
| Mechanical limiting speed — forced oil circulation | — | Not stated in this catalogue row |
| Limiting speed — grease | — | 4300 r/min |
| Limiting speed — oil bath | — | 5300 r/min |
| Main Dimensions & Performance Data | ||
| Basic dynamic load rating, radialCr | 116,000 N | — |
| Basic dynamic load rating, radialCr | 26,079.137 lbf | — |
| Basic static load rating, radialC0r | 135,000 N | — |
| Basic static load rating, radialC0r | 30,350.719 lbf | — |
| Fatigue load limit, radialCur | 21,200 N | — |
| Fatigue load limit, radialCur | 4,766.187 lbf | — |
| Manufacturer Identity | ||
| Schaeffler Product Code | 372171 | — |
| Base Type | NJ1020 | — |
| Old Designation | ["NJ1020-M1"] | — |
| Gpsd Group | F01 | — |
| Product Line Id | 63 | — |
| X Life Marking | XL | — |
| SAP material number | 0389056710000 | — |
| Base product | 2305090111 | — |
| Bearing X designation | NJ1020-XL-M1 | — |
| Mounting Manager ID | NJ1020-XL-M1 | — |
| Grease application ID | NJ1020-XL-M1 | — |
| Mounting dimensions | ||
| Minimum diameter shaft shoulderda min | 106 mm | — |
| Minimum diameter shaft shoulderda min | 4.173 in | — |
| Maximum diameter of shaft shoulderda max | 111 mm | — |
| Maximum diameter of shaft shoulderda max | 4.37 in | — |
| Maximum diameter of housing shoulderDa max | 143 mm | — |
| Maximum diameter of housing shoulderDa max | 5.63 in | — |
| Minimum shaft shoulderdc min | 119 mm | — |
| Minimum shaft shoulderdc min | 4.685 in | — |
| Maximum recess radiusra max | 1.5 mm | — |
| Maximum recess radiusra max | 0.059 in | — |
| Mounting dimensions — shown arrangement | ||
| Minimum shaft shoulder diameterdb min. | — | 106.5 mm |
| Maximum housing shoulder diameterDa max. | — | 142 mm |
| Maximum adjusting-ring diameter (NU/NJ arrangement)db max. | — | 111 mm |
| Maximum adjacent fillet radiusra max. | — | 1.5 mm |
| Maximum secondary adjacent fillet radiusrb max. | — | 1 mm |
| Product characteristics | ||
| Design | Standard | — |
| Radial internal clearanceCN (Group N) | Normal internal clearance | — |
| Tolerance classPN | Normal (ISO 492:2023) | — |
| Number of rows1 | Single-row design | — |
| Product Identity | ||
| Construction | Cylindrical roller bearing NJ..-XL-M1, with cage, single row, semi-locating bearing, 2 ribs on outer ring, 1 rib on inner ring, type NJ | — |
| Short Description | Cylindrical roller bearing | — |
| Technical Data | ||
| Bore Diameter (D) | 100 mm | — |
| Outside Diamater (D) | 150 mm | — |
| Total Width (B) | 24 mm | — |
| Basic Dynamic Load Rating, Radial (Cr) | 116,000 N | — |
| Basic Static Load Rating, Radial (C0R) | 135,000 N | — |
| Raceway Diameter Inner Ring (F) | 113 mm | — |
| Operating Temperature Min. (Tmin) | -30 °C | — |
| Minimum Diameter Shaft Shoulder (Da) | 106 mm | — |
| Operating Temperature Max. (Tmax) | 150 °C | — |
| Limiting Speed (Limiting Spe) | 9,000 1/min | — |
| Minimum Shaft Shoulder (Dc Min) | 119 mm | — |
| Reference Speed (Nϑr) | 4,150 1/min | — |
| Maximum Recess Radius (Ra Max) | 1.5 mm | — |
| Maximum Diameter Of Housing Shoulder (Da) | 143 mm | — |
| Maximum Rib Diameter Inner Ring (D1) | 117.6 mm | — |
| Minimum Chamfer Dimension (R1 Min) | 1.1 mm | — |
| Axial Displacement (S) | 2.9 mm | — |
| Minimum Rib Diameter Outer Ring (D1 Min) | 132.85 mm | — |
| Maximum Diameter Of Shaft Shoulder (Da Max) | 111 mm | — |
| Minimum Chamfer Dimension (Rmin) | 1.5 mm | — |
| Raceway Diameter Outer Ring (E) | 137 mm | — |
| Fatigue Load Limit, Radial (Cur) | 21,200 N | — |
| Temperature range | ||
| Operating temperature min.Tmin | -30 °C | — |
| Operating temperature min.Tmin | -22 °F | — |
| Operating temperature max.Tmax | 150 °C | — |
| Operating temperature max.Tmax | 302 °F | — |
Automatic matching is a search aid, not an interchangeability declaration. Confirm the full suffix, tolerances, internal design and application limits before substitution.