Same-model Comparison
Explore products that share a base designation across loaded brands, with dimensional agreement and data gaps shown clearly.
Cross Reference centre · Interchange verification checklist · Understand suffix differences
You entered NF314W. This table explores the base group NF314; it does not preserve or approve every requested suffix. Search your complete marking first →
One base designation across loaded brands
Exact designations rank first. Dimensions, suffixes and other technical differences remain visible so the result is not mistaken for an interchangeability declaration.
“NF314” across 2 loaded brands
One highest-ranked designation candidate is shown per manufacturer. Use Custom Compare when you want to choose exact suffix variants yourself.
Brand differences at a glance
| Parameter | NSKNF314W70 × 150 × 35 mm | KOYONF31470 × 150 × 35 mm |
|---|---|---|
| Comparable specifications | ||
| Brand | NSK | KOYO |
| Designation | NF314W | NF314 |
| Product family | Cylindrical roller bearing | Single-row / NF |
| Detailed type | Cylindrical roller bearings | Cylindrical roller bearings |
| Bore diameterd | 70 mm | 70 mm |
| Outside diameterD | 150 mm | 150 mm |
| WidthB | 35 mm | 35 mm |
| Basic dynamic load ratingC | 183 kN | 198 kN |
| Basic static load ratingC0 | 156 kN | 168 kN |
| Fatigue load limitPu | — | 23.3 kN |
| Limiting speednG | — | 4000 r/min |
| Mass≈m | — | 2.78 kg |
| Cage | Pressed steel | — |
| Boundary dimensions | ||
| Bearing widthB | 35 mm | — |
| Minimum bearing chamferr min. | 2.1 mm | — |
| Minimum secondary bearing chamferr1 min. | 2.1 mm | — |
| Roller circumscribed circle diameterEw | 130 mm | — |
| Catalogue reference mass | ||
| Approximate shared-row mass — not separately stated for each rib arrangement | 2.67 kg | — |
| Classification | ||
| Official Category Path | — | Cylindrical roller bearings - Single-row - NF |
| Official Classification 1 | — | Cylindrical roller bearings / Single-row / NF |
| Construction | ||
| Single-row construction type | NF | — |
| Rib arrangement | Two inner-ring ribs; one outer-ring rib | — |
| Standard cage material | Pressed steel | — |
| Standard cage marking | W | — |
| Other cage codes listed for this catalogue row | M | — |
| Precision — designation omission rule | ISO Normal when no precision suffix is specified | — |
| Clearance identification — verify interchangeability | No clearance suffix shown. CN omission applies to interchangeable designs; do not infer a numerical clearance. | — |
| Optimized crowning note | No optimized-crowning asterisk on this row | — |
| Load ratings — standard cage | ||
| Basic dynamic radial load ratingCr | 183000 N | — |
| Basic static radial load ratingC0r | 156000 N | — |
| Lubrication-qualified speed — standard cage | ||
| Thermal speed rating — oil bath | 5600 r/min | — |
| Mechanical limiting speed — forced oil circulation | Not stated in this catalogue row | — |
| Limiting speed — grease | 3200 r/min | — |
| Limiting speed — oil bath | 4000 r/min | — |
| Manufacturer Identity | ||
| Official Class Key | — | 040-010-000 |
| Mounting dimensions — shown arrangement | ||
| Minimum shaft shoulder diameterda min. | 81 mm | — |
| Maximum housing shoulder diameterDb max. | 139 mm | — |
| Minimum housing shoulder diameterDb min. | 133.5 mm | — |
| Maximum adjacent fillet radiusra max. | 2 mm | — |
| Maximum secondary adjacent fillet radiusrb max. | 2 mm | — |
| Technical Data | ||
| d | — | 150 mm |
| B | — | 35 mm |
| R(Min.) | — | 2.1 mm |
| R1(Min.) | — | 2.1 mm |
| Fw | — | - mm |
| Ew | — | 130 mm |
| Basic Load Ratings : Cr | — | 198 kN |
| Basic Load Ratings : C0R | — | 168 kN |
| Fatigue Load Limit : Cu | — | 23.3 kN |
| Limiting Speeds(Grease Lub.) | — | 4000 min-1 |
| Limiting Speeds(Oil Lub.) | — | 5400 min-1 |
| Sd1 | — | - mm |
| B1 | — | - mm |
| B2 | — | - mm |
| Da(Min.) | — | 81 mm |
| Db(Min.) | — | 134 mm |
| Db(Max.) | — | 139 mm |
| Dc(Min.) | — | - mm |
| Dd(Min.) | — | - mm |
| Da(Max.) | — | - mm |
| Ra(Max.) | — | 2 mm |
| Rb(Max.) | — | 2 mm |
| Mass(Refer.) | — | 2.78 kg |
Automatic matching is a search aid, not an interchangeability declaration. Confirm the full suffix, tolerances, internal design and application limits before substitution.