Same-model Comparison
Explore products that share a base designation across loaded brands, with dimensional agreement and data gaps shown clearly.
Cross Reference centre · Interchange verification checklist · Understand suffix differences
You entered NATV-25-PPX. This table explores the base group NATV25; it does not preserve or approve every requested suffix. Search your complete marking first →
One base designation across loaded brands
Exact designations rank first. Dimensions, suffixes and other technical differences remain visible so the result is not mistaken for an interchangeability declaration.
“NATV25” across 2 loaded brands
The base designation is shared, but too few brands have complete boundary dimensions. Use Custom Compare when you want to choose exact suffix variants yourself.
Brand differences at a glance
| Parameter | SKFNATV 2525 × 52 × mm | INANATV2525 × 52 × 25 mm |
|---|---|---|
| Comparable specifications | ||
| Brand | SKF | INA |
| Designation | NATV 25 | NATV25 |
| Product family | Support rollers (Yoke-type track rollers) | — |
| Detailed type | Support rollers (yoke-type track rollers) with flange rings and relubrication feature | Yoke type track roller |
| Bore diameterd | 25 mm | 25 mm |
| Outside diameterD | 52 mm | 52 mm |
| WidthB | — | 25 mm |
| Basic dynamic load ratingC | 25.5 kN | 20.1 kN |
| Basic static load ratingC0 | 48 kN | 44.5 kN |
| Fatigue load limitPu | 5.85 kN | 6.3 kN |
| Limiting speednG | 1600 r/min | 1000 r/min |
| Mass≈m | 0.285 kg | 0.29413 kg |
| Internal clearance | Between C2 and CN | — |
| Sealing | Seal on both sides | — |
| Cage | Without | — |
| Bearing material | Bearing steel | — |
| Lubricant | Grease | — |
| Dimensions | ||
| Functional outside diameter | 52.0 mm | — |
| Width, total | 25.0 mm | — |
| Width, outer ring | 24.0 mm | — |
| Engineering — Calculation data | ||
| Maximum dynamic radial loadsF r | max. 26 kN | — |
| Maximum static radial loadsF 0r | max. 37.5 kN | — |
| Engineering — Dimensions | ||
| Width outer ringC | 24 mm | — |
| Width inner ringB | 25 mm | — |
| Outside diameter flange ringd 1 | 42.5 mm | — |
| Logistics | ||
| Product net weight | 0.285 kg | — |
| eClass code | 23-05-09-03 | — |
| UNSPSC code | 31171512 | — |
| Manufacturer Identity | ||
| Schaeffler Product Code | — | 399017 |
| Base Type | — | NATV25 |
| Old Designation | — | ["NATV 25"] |
| Gpsd Group | — | I03 |
| Product Line Id | — | 13 |
| X Life Marking | — | n.r. |
| Product identity | ||
| Official product category | Support rollers (Yoke-type track rollers) | — |
| Official taxonomy path | /products/rolling-bearings/track-rollers/support-rollers | — |
| Structure group ID | BNT_003 | — |
| Available from SKF | Yes | — |
| Remanufacturable | No | — |
| Product Identity | ||
| Construction | — | Yoke type track rollers NATV.., single row needle roller bearings with particularly thick-walled outer ring, full complement needle roller set and an inner ring,axial guidance of outer ring is provided by the contact washers, gap seals on both sides |
| Short Description | — | Yoke type track roller |
| Properties | ||
| Bearing part | Complete track roller | — |
| Rolling elements | Needle rollers | — |
| Number of rows | 1 | — |
| Outer ring profile | Crowned | — |
| Axial guidance of outer ring | Yes | — |
| Number of flanges, outer ring | 2 | — |
| Radial internal clearance | Between C2 and CN | — |
| Tolerance class | Other | — |
| Material, bearing | Bearing steel | — |
| Coating | Without | — |
| Sealing type | Gap-type | — |
| Relubrication feature | With | — |
| Technical Data | ||
| Bore Diameter (D) | — | 25 mm |
| Outside Diamater (D) | — | 52 mm |
| Width Inner Ring (B) | — | 25 mm |
| Basic Dynamic Load Rating, Radial (Cr W) | — | 20,100 N |
| Basic Static Load Rating, Radial (C0R W) | — | 44,500 N |
| Speed On Permanent Grease Lubrication (Nd G) | — | 1,000 1/min |
| Width, Outer Ring (C) | — | 24 mm |
| Permissible Static Load, Radial (F0R Per) | — | 44,500 N |
| Permissible Dynamic Load Outer Ring, Radial (Fr Per) | — | 43,500 N |
| Outside Diameter Of Thrust Washer (D2) | — | 41.5 mm |
| Radius Of Outer Ring Outside Profile (R) | — | 500 mm |
| Fatigue Load Limit, Radial (Cur W) | — | 6,300 N |
| Minimum Chamfer Dimension (Rmin) | — | 1 mm |
Automatic matching is a search aid, not an interchangeability declaration. Confirm the full suffix, tolerances, internal design and application limits before substitution.