Same-model Comparison
Explore products that share a base designation across loaded brands, with dimensional agreement and data gaps shown clearly.
Cross Reference centre · Interchange verification checklist · Understand suffix differences
You entered NATR-35-PP. This table explores the base group NATR35; it does not preserve or approve every requested suffix. Search your complete marking first →
One base designation across loaded brands
Exact designations rank first. Dimensions, suffixes and other technical differences remain visible so the result is not mistaken for an interchangeability declaration.
“NATR35” across 2 loaded brands
The base designation is shared, but too few brands have complete boundary dimensions. Use Custom Compare when you want to choose exact suffix variants yourself.
Brand differences at a glance
| Parameter | SKFNATR 35 PP35 × 72 × mm | INANATR35-PP35 × 72 × 29 mm |
|---|---|---|
| Comparable specifications | ||
| Brand | SKF | INA |
| Designation | NATR 35 PP | NATR35-PP |
| Product family | Support rollers (Yoke-type track rollers) | — |
| Detailed type | Support rollers (yoke-type track rollers) with flange rings, integral sealing and relubrication feature | Yoke type track roller |
| Series | — | NATR35 |
| Bore diameterd | 35 mm | 35 mm |
| Outside diameterD | 72 mm | 72 mm |
| WidthB | — | 29 mm |
| Basic dynamic load ratingC | 25.5 kN | 24.8 kN |
| Basic static load ratingC0 | 41.5 kN | 45 kN |
| Fatigue load limitPu | 5.1 kN | 6 kN |
| Limiting speednG | 1700 r/min | 1000 r/min |
| Mass≈m | 0.622 kg | 0.6 kg |
| Internal clearance | Between C2 and CN | — |
| Sealing | Seal on both sides | — |
| Cage | With | — |
| Bearing material | Bearing steel | — |
| Lubricant | Grease | — |
| Dimensions | ||
| Functional outside diameter | 72.0 mm | — |
| Width, total | 29.0 mm | — |
| Width, outer ring | 28.0 mm | — |
| Engineering — Calculation data | ||
| Maximum dynamic radial loadsF r | max. 40.5 kN | — |
| Maximum static radial loadsF 0r | max. 58.5 kN | — |
| Engineering — Dimensions | ||
| Width outer ringC | 28 mm | — |
| Width inner ringB | 29 mm | — |
| Outside diameter flange ringd 1 | 53 mm | — |
| Logistics | ||
| Product net weight | 0.622 kg | — |
| eClass code | 23-05-09-03 | — |
| UNSPSC code | 31171512 | — |
| Manufacturer Identity | ||
| Schaeffler Product Code | — | 398830 |
| Base Type | — | NATR35 |
| Gpsd Group | — | I03 |
| Product Line Id | — | 13 |
| X Life Marking | — | n.r. |
| Product identity | ||
| Official product category | Support rollers (Yoke-type track rollers) | — |
| Official taxonomy path | /products/rolling-bearings/track-rollers/support-rollers | — |
| Structure group ID | BNT_003 | — |
| Available from SKF | Yes | — |
| Remanufacturable | No | — |
| Product Identity | ||
| Construction | — | Yoke type track rollers NATR..-PP-A, single row needle roller bearings with particularly thick-walled outer ring, needle roller and cage assembly and an inner ring, axial guidance of outer ring is provided by the plastic axial plain washers and contact washers, three-stage sealing by plastic axial plain washer on both sides |
| Short Description | — | Yoke type track roller |
| Properties | ||
| Bearing part | Complete track roller | — |
| Rolling elements | Needle rollers | — |
| Number of rows | 1 | — |
| Outer ring profile | Crowned | — |
| Axial guidance of outer ring | Yes | — |
| Number of flanges, outer ring | 2 | — |
| Radial internal clearance | Between C2 and CN | — |
| Tolerance class | Other | — |
| Material, bearing | Bearing steel | — |
| Coating | Without | — |
| Sealing type | Contact | — |
| Relubrication feature | With | — |
| Technical Data | ||
| Bore Diameter (D) | — | 35 mm |
| Outside Diamater (D) | — | 72 mm |
| Width Inner Ring (B) | — | 29 mm |
| Basic Dynamic Load Rating, Radial (Cr W) | — | 24,800 N |
| Basic Static Load Rating, Radial (C0R W) | — | 45,000 N |
| Speed On Permanent Grease Lubrication (Nd G) | — | 1,000 1/min |
| Width, Outer Ring (C) | — | 28 mm |
| Permissible Static Load, Radial (F0R Per) | — | 45,000 N |
| Permissible Dynamic Load Outer Ring, Radial (Fr Per) | — | 45,000 N |
| Outside Diameter Of Thrust Washer (D2) | — | 58 mm |
| Fatigue Load Limit, Radial (Cur W) | — | 6,000 N |
| Minimum Chamfer Dimension (Rmin) | — | 1.1 mm |
Automatic matching is a search aid, not an interchangeability declaration. Confirm the full suffix, tolerances, internal design and application limits before substitution.