Cross-brand designation analysis
COMPARE / VERIFY
Same-model Comparison
Explore products that share a base designation across loaded brands, with dimensional agreement and data gaps shown clearly.
Cross Reference centre · Interchange verification checklist · Understand suffix differences
You entered N307-E-XL-TVP2. This table explores the base group N307; it does not preserve or approve every requested suffix. Search your complete marking first →
Automatic candidate selection
One base designation across loaded brands
Exact designations rank first. Dimensions, suffixes and other technical differences remain visible so the result is not mistaken for an interchangeability declaration.
Dimensions verified
“N307” across 4 loaded brands
At least two brands share the same bore, outside diameter and width. Use Custom Compare when you want to choose exact suffix variants yourself.
Technical comparison
Choose exact variants instead →Brand differences at a glance
| Parameter | SKFN 307 ECP35 × 80 × 21 mm | FAGN307-E-XL-M135 × 80 × 21 mm | NSKN307W35 × 80 × 21 mm | KOYON30735 × 80 × 21 mm |
|---|---|---|---|---|
| Comparable specifications | ||||
| Brand | SKF | FAG | NSK | KOYO |
| Designation | N 307 ECP | N307-E-XL-M1 | N307W | N307 |
| Product family | Cylindrical roller bearings | — | Cylindrical roller bearing | Single-row / N |
| Detailed type | Single row cylindrical roller bearing, n design | Cylindrical roller bearings | Cylindrical roller bearings | Cylindrical roller bearings |
| Bore diameterd | 35 mm | 35 mm | 35 mm | 35 mm |
| Outside diameterD | 80 mm | 80 mm | 80 mm | 80 mm |
| WidthB | 21 mm | 21 mm | 21 mm | 21 mm |
| Basic dynamic load ratingC | 75 kN | 76 kN | 61 kN | 62 kN |
| Basic static load ratingC0 | 63 kN | 63 kN | 47 kN | 46.9 kN |
| Fatigue load limitPu | 8.15 kN | 10.6 kN | — | 6.2 kN |
| Reference speednref | 9500 r/min | — | — | — |
| Limiting speednG | 11000 r/min | — | — | 7900 r/min |
| Mass≈m | 0.465 kg | 0.536 kg | — | 0.462 kg |
| Internal clearance | CN | — | — | — |
| Sealing | Without | — | — | — |
| Cage | Non-metallic | M1 — Two Piece Brass Cage Roller Guided | Pressed steel | — |
| Lubricant | None | — | — | — |
| Minimum operating temperatureTmin | — | -30 °C | — | — |
| Maximum operating temperatureTmax | — | 150 °C | — | — |
| Boundary dimensions | ||||
| Bearing widthB | — | — | 21 mm | — |
| Minimum bearing chamferr min. | — | — | 1.5 mm | — |
| Minimum secondary bearing chamferr1 min. | — | — | 1.1 mm | — |
| Roller circumscribed circle diameterEw | — | — | 68.2 mm | — |
| Capabilities & suitability | ||||
| Radial load capacity | — | Yes | — | — |
| Suitable for grease lubrication | — | Yes | — | — |
| Suitable for oil lubrication | — | Yes | — | — |
| Unsealed design | — | Yes | — | — |
| Catalogue reference mass | ||||
| Approximate shared-row mass — not separately stated for each rib arrangement | — | — | 0.476 kg | — |
| Classification | ||||
| Official Category Path | — | — | — | Cylindrical roller bearings - Single-row - N |
| Official Classification 1 | — | — | — | Cylindrical roller bearings / Single-row / N |
| Construction | ||||
| Single-row construction type | — | — | N | — |
| Rib arrangement | — | — | Two inner-ring ribs; ribless outer ring | — |
| Standard cage material | — | — | Pressed steel | — |
| Standard cage marking | — | — | W | — |
| Other cage codes listed for this catalogue row | — | — | M | — |
| Precision — designation omission rule | — | — | ISO Normal when no precision suffix is specified | — |
| Clearance identification — verify interchangeability | — | — | No clearance suffix shown. CN omission applies to interchangeable designs; do not infer a numerical clearance. | — |
| Optimized crowning note | — | — | No optimized-crowning asterisk on this row | — |
| Dimensions | ||||
| Minimum chamfer dimensionr1 min | — | 1.1 mm | — | — |
| Minimum chamfer dimensionr1 min | — | 0.043 in | — | — |
| Raceway diameter outer ringE | — | 70.2 mm | — | — |
| Raceway diameter outer ringE | — | 2.764 in | — | — |
| Engineering — Abutment dimensions | ||||
| Diameter of spacer sleeved a | max. 68 mm | — | — | — |
| Diameter of housing abutmentD a | max. 73.4 mm | — | — | — |
| Radius of filletr a | max. 1.5 mm | — | — | — |
| Radius of filletr b | max. 1 mm | — | — | — |
| Engineering — Calculation data | ||||
| SKF performance class | SKF Explorer | — | — | — |
| Minimum load factork r | 0.12 | — | — | — |
| Limiting valuee | 0.2 | — | — | — |
| Calculation factorY | 0.6 | — | — | — |
| Engineering — Dimensions | ||||
| Shoulder diameter of inner ringd 1 | ≈ 51 mm | — | — | — |
| Raceway diameter of outer ringE | 70.2 mm | — | — | — |
| Chamfer dimensionr 1,2 | min. 1.5 mm | — | — | — |
| Chamfer dimensionr 3,4 | min. 1.1 mm | — | — | — |
| Permissible axial displacements | max. 1.2 mm | — | — | — |
| Load ratings — standard cage | ||||
| Basic dynamic radial load ratingCr | — | — | 61000 N | — |
| Basic static radial load ratingC0r | — | — | 47000 N | — |
| Logistics | ||||
| Product net weight | 0.465 kg | — | — | — |
| eClass code | 23-05-09-01 | — | — | — |
| UNSPSC code | 31171505 | — | — | — |
| Lubrication-qualified speed — standard cage | ||||
| Thermal speed rating — oil bath | — | — | 9500 r/min | — |
| Mechanical limiting speed — forced oil circulation | — | — | Not stated in this catalogue row | — |
| Limiting speed — grease | — | — | 6300 r/min | — |
| Limiting speed — oil bath | — | — | 7500 r/min | — |
| Main Dimensions & Performance Data | ||||
| Basic dynamic load rating, radialCr | — | 76,000 N | — | — |
| Basic dynamic load rating, radialCr | — | 17,086.331 lbf | — | — |
| Basic static load rating, radialC0r | — | 63,000 N | — | — |
| Basic static load rating, radialC0r | — | 14,163.669 lbf | — | — |
| Fatigue load limit, radialCur | — | 10,600 N | — | — |
| Fatigue load limit, radialCur | — | 2,383.094 lbf | — | — |
| Manufacturer Identity | ||||
| Schaeffler Product Code | — | 367682 | — | — |
| Official Class Key | — | — | — | 040-010-000 |
| Gpsd Group | — | F01 | — | — |
| Product Line Id | — | 12 | — | — |
| SAP material number | — | 0192184350000 | — | — |
| Base product | — | 2305090101 | — | — |
| Bearing X designation | — | N307-E-XL-M1 | — | — |
| Mounting Manager ID | — | N307-E-XL-M1 | — | — |
| Grease application ID | — | N307-E-XL-M1 | — | — |
| Mounting dimensions | ||||
| Diameter of housing shoulderDa | — | 71 mm | — | — |
| Diameter of housing shoulderDa | — | 2.795 in | — | — |
| Maximum recess radiusra1 max | — | 1 mm | — | — |
| Maximum recess radiusra1 max | — | 0.039 in | — | — |
| Mounting dimensions — shown arrangement | ||||
| Minimum shaft shoulder diameterda min. | — | — | 43 mm | — |
| Maximum housing shoulder diameterDb max. | — | — | 73.5 mm | — |
| Minimum housing shoulder diameterDb min. | — | — | 70 mm | — |
| Maximum adjacent fillet radiusra max. | — | — | 1.5 mm | — |
| Maximum secondary adjacent fillet radiusrb max. | — | — | 1 mm | — |
| Product characteristics | ||||
| Change markE | — | Increased Capacity Design | — | — |
| Number of rows1 | — | Single-row design | — | — |
| Product identity | ||||
| Official product category | Cylindrical roller bearings | — | — | — |
| Official taxonomy path | /products/rolling-bearings/roller-bearings/cylindrical-roller-bearings/single-row-cylindrical-roller-bearings | — | — | — |
| Structure group ID | BC1_001_101 | — | — | — |
| Available from SKF | Yes | — | — | — |
| Remanufacturable | No | — | — | — |
| Product Identity | ||||
| Construction | — | Cylindrical roller bearing N3..-E-M1, with cage, single row, non-locating bearing, 0 ribs on outer ring, 2 rib on inner ring, type N3 | — | — |
| Short Description | — | Cylindrical roller bearing | — | — |
| Properties | ||||
| Bearing part | Complete bearing | — | — | — |
| Axial displacement capability | In both directions | — | — | — |
| Number of rows | 1 | — | — | — |
| Locating feature, bearing outer ring | Without | — | — | — |
| Bore type | Cylindrical | — | — | — |
| Number of flanges, outer ring | 0 | — | — | — |
| Number of flanges, inner ring | 2 | — | — | — |
| Loose flange | None | — | — | — |
| Radial internal clearance | CN | — | — | — |
| Tolerance class | Normal | — | — | — |
| Coating | Without | — | — | — |
| Relubrication feature | Without | — | — | — |
| Indicative carbon footprint for new product | 1.7 kg CO 2 e | — | — | — |
| Technical Data | ||||
| d | — | — | — | 80 mm |
| Bore Diameter (D) | — | 35 mm | — | — |
| B | — | — | — | 21 mm |
| Outside Diamater (D) | — | 80 mm | — | — |
| R(Min.) | — | — | — | 1.5 mm |
| Total Width (B) | — | 21 mm | — | — |
| R1(Min.) | — | — | — | 1.1 mm |
| Basic Dynamic Load Rating, Radial (Cr) | — | 76,000 N | — | — |
| Fw | — | — | — | - mm |
| Basic Static Load Rating, Radial (C0R) | — | 63,000 N | — | — |
| Ew | — | — | — | 68.2 mm |
| Operating Temperature Min. (Tmin) | — | -30 °C | — | — |
| Basic Load Ratings : Cr | — | — | — | 62.0 kN |
| Operating Temperature Max. (Tmax) | — | 150 °C | — | — |
| Basic Load Ratings : C0R | — | — | — | 46.9 kN |
| Maximum Diameter Of Housing Shoulder (Da) | — | 71 mm | — | — |
| Fatigue Load Limit : Cu | — | — | — | 6.20 kN |
| Minimum Chamfer Dimension (R1 Min) | — | 1.1 mm | — | — |
| Limiting Speeds(Grease Lub.) | — | — | — | 7900 min-1 |
| Maximum Recess Radius (Ra1 Max) | — | 1 mm | — | — |
| Limiting Speeds(Oil Lub.) | — | — | — | 10000 min-1 |
| Raceway Diameter Outer Ring (E) | — | 70.2 mm | — | — |
| Sd1 | — | — | — | - mm |
| Fatigue Load Limit, Radial (Cur) | — | 10,600 N | — | — |
| B1 | — | — | — | - mm |
| B2 | — | — | — | - mm |
| Da(Min.) | — | — | — | 43 mm |
| Db(Min.) | — | — | — | 71 mm |
| Db(Max.) | — | — | — | 73.5 mm |
| Dc(Min.) | — | — | — | - mm |
| Dd(Min.) | — | — | — | - mm |
| Da(Max.) | — | — | — | - mm |
| Ra(Max.) | — | — | — | 1.5 mm |
| Rb(Max.) | — | — | — | 1 mm |
| Mass(Refer.) | — | — | — | 0.462 kg |
| Temperature range | ||||
| Operating temperature min.Tmin | — | -30 °C | — | — |
| Operating temperature min.Tmin | — | -22 °F | — | — |
| Operating temperature max.Tmax | — | 150 °C | — | — |
| Operating temperature max.Tmax | — | 302 °F | — | — |
Automatic matching is a search aid, not an interchangeability declaration. Confirm the full suffix, tolerances, internal design and application limits before substitution.