Cross-brand designation analysis
COMPARE / VERIFY
Same-model Comparison
Explore products that share a base designation across loaded brands, with dimensional agreement and data gaps shown clearly.
Cross Reference centre · Interchange verification checklist · Understand suffix differences
You entered N230EMB. This table explores the base group N230; it does not preserve or approve every requested suffix. Search your complete marking first →
Automatic candidate selection
One base designation across loaded brands
Exact designations rank first. Dimensions, suffixes and other technical differences remain visible so the result is not mistaken for an interchangeability declaration.
Dimensions verified
“N230” across 4 loaded brands
At least two brands share the same bore, outside diameter and width. Use Custom Compare when you want to choose exact suffix variants yourself.
Technical comparison
Choose exact variants instead →Brand differences at a glance
| Parameter | FAGN230-E-XL-M1150 × 270 × 45 mm | TIMKENN230EMB150 × 270 × 45 mm | NSKN230W150 × 270 × 45 mm | KOYON230150 × 270 × 45 mm |
|---|---|---|---|---|
| Comparable specifications | ||||
| Brand | FAG | TIMKEN | NSK | KOYO |
| Designation | N230-E-XL-M1 | N230EMB | N230W | N230 |
| Product family | — | Cylindrical 1-Row | Cylindrical roller bearing | Single-row / NU |
| Detailed type | Cylindrical roller bearings | Cylindrical roller bearings | Cylindrical roller bearings | Cylindrical roller bearings |
| Series | N230 | EX27531 | — | — |
| Bore diameterd | 150 mm | 150 mm | 150 mm | 150 mm |
| Outside diameterD | 270 mm | 270 mm | 270 mm | 270 mm |
| WidthB | 45 mm | 45 mm | 45 mm | 45 mm |
| Basic dynamic load ratingC | 520 kN | 506 kN | 440 kN | 468 kN |
| Basic static load ratingC0 | 590 kN | 607 kN | 465 kN | 492 kN |
| Fatigue load limitPu | 90 kN | — | — | 63.4 kN |
| Limiting speednG | — | — | — | 2200 r/min |
| Mass≈m | 12.196 kg | 11.4 kg | — | — |
| Precision class | PN — Normal (ISO 492:2023) | — | — | — |
| Internal clearance | CN (Group N) — Normal internal clearance | — | — | — |
| Sealing | — | Open | — | — |
| Cage | M1 — Two Piece Brass Cage Roller Guided | Window Brass cage | Pressed steel | — |
| Minimum operating temperatureTmin | -30 °C | — | — | — |
| Maximum operating temperatureTmax | 150 °C | — | — | — |
| Boundary dimensions | ||||
| Bearing widthB | — | — | 45 mm | — |
| Minimum bearing chamferr min. | — | — | 3 mm | — |
| Minimum secondary bearing chamferr1 min. | — | — | 3 mm | — |
| Roller circumscribed circle diameterEw | — | — | 238 mm | — |
| Calculation Factors | ||||
| K Factor | — | 0.00 | — | — |
| Y1 Factor | — | 0.00 | — | — |
| Y2 Factor | — | 0.00 | — | — |
| Y0 Factor | — | 0.00 | — | — |
| E Factor | — | 0.00 | — | — |
| Cg Factor | — | 0.1076 | — | — |
| Capabilities & suitability | ||||
| Radial load capacity | Yes | — | — | — |
| Suitable for grease lubrication | Yes | — | — | — |
| Suitable for oil lubrication | Yes | — | — | — |
| Unsealed design | Yes | — | — | — |
| Catalogue reference mass | ||||
| Approximate shared-row mass — not separately stated for each rib arrangement | — | — | 10.4 kg | — |
| Classification | ||||
| Official Category Path | — | — | — | Cylindrical roller bearings - Single-row - NU |
| Official Classification 1 | — | — | — | Cylindrical roller bearings / Single-row / NU |
| Official Classification 2 | — | — | — | Cylindrical roller bearings / Single-row / N |
| Construction | ||||
| Single-row construction type | — | — | N | — |
| Rib arrangement | — | — | Two inner-ring ribs; ribless outer ring | — |
| Standard cage material | — | — | Pressed steel | — |
| Standard cage marking | — | — | W | — |
| Other cage codes listed for this catalogue row | — | — | M | — |
| Precision — designation omission rule | — | — | ISO Normal when no precision suffix is specified | — |
| Clearance identification — verify interchangeability | — | — | No clearance suffix shown. CN omission applies to interchangeable designs; do not infer a numerical clearance. | — |
| Optimized crowning note | — | — | No optimized-crowning asterisk on this row | — |
| Dimensions | ||||
| Minimum chamfer dimensionr1 min | 3 mm | — | — | — |
| Minimum chamfer dimensionr1 min | 0.118 in | — | — | — |
| Axial displacements1 | 4 mm | — | — | — |
| Axial displacements1 | 0.157 in | — | — | — |
| Raceway diameter outer ringE | 242 mm | — | — | — |
| Raceway diameter outer ringE | 9.528 in | — | — | — |
| Load ratings — standard cage | ||||
| Basic dynamic radial load ratingCr | — | — | 440000 N | — |
| Basic static radial load ratingC0r | — | — | 465000 N | — |
| Lubrication-qualified speed — standard cage | ||||
| Thermal speed rating — oil bath | — | — | 3000 r/min | — |
| Mechanical limiting speed — forced oil circulation | — | — | Not stated in this catalogue row | — |
| Limiting speed — grease | — | — | 1800 r/min | — |
| Limiting speed — oil bath | — | — | 2200 r/min | — |
| Main Dimensions & Performance Data | ||||
| Basic dynamic load rating, radialCr | 520,000 N | — | — | — |
| Basic dynamic load rating, radialCr | 116,906.475 lbf | — | — | — |
| Basic static load rating, radialC0r | 590,000 N | — | — | — |
| Basic static load rating, radialC0r | 132,643.885 lbf | — | — | — |
| Fatigue load limit, radialCur | 90,000 N | — | — | — |
| Fatigue load limit, radialCur | 20,233.813 lbf | — | — | — |
| Limiting speed for grease lubricationnG Grease | 3,850 1/min | — | — | — |
| Limiting speed for oil lubricationnG Oil | 4,550 1/min | — | — | — |
| Manufacturer Identity | ||||
| Schaeffler Product Code | 367632 | — | — | — |
| Material Number | — | 000000000190026688 | — | — |
| Official Class Key | — | — | — | 040-010-000 |
| Base Type | N230 | — | — | — |
| World Assembly Part Number | — | N230EMB | — | — |
| Gpsd Group | F01 | — | — | — |
| Inner Ring Part Number | — | 150ARNE02 | — | — |
| Product Line Id | 63 | — | — | — |
| Outer Ring Part Number | — | 150ERNE02 | — | — |
| Drawing Number | — | M943667 | — | — |
| Upc | — | 0053893024103 | — | — |
| Official Source System | — | CORE BP - DS DF | — | — |
| Official Last Run | — | 2026-08-23T20:02:48.507 | — | — |
| SAP material number | 0192179510000 | — | — | — |
| Base product | 2305090101 | — | — | — |
| Bearing X designation | N230-E-XL-M1 | — | — | — |
| Mounting Manager ID | N230-E-XL-M1 | — | — | — |
| Grease application ID | N230-E-XL-M1 | — | — | — |
| Mounting dimensions | ||||
| Diameter shaft shoulderda | 164 mm | — | — | — |
| Diameter shaft shoulderda | 6.457 in | — | — | — |
| Diameter of housing shoulderDa | 256 mm | — | — | — |
| Diameter of housing shoulderDa | 10.079 in | — | — | — |
| Maximum recess radiusra1 max | 2.5 mm | — | — | — |
| Maximum recess radiusra1 max | 0.098 in | — | — | — |
| Mounting dimensions — shown arrangement | ||||
| Minimum shaft shoulder diameterda min. | — | — | 163 mm | — |
| Maximum housing shoulder diameterDb max. | — | — | 257 mm | — |
| Minimum housing shoulder diameterDb min. | — | — | 242 mm | — |
| Maximum adjacent fillet radiusra max. | — | — | 2.5 mm | — |
| Maximum secondary adjacent fillet radiusrb max. | — | — | 2.5 mm | — |
| Product characteristics | ||||
| Tolerance classPN | Normal (ISO 492:2023) | — | — | — |
| Change markE | Increased Capacity Design | — | — | — |
| Radial internal clearanceCN (Group N) | Normal internal clearance | — | — | — |
| Number of rows1 | Single-row design | — | — | — |
| Product Identity | ||||
| Construction | Cylindrical roller bearing N2..-M1, with cage, single row, non-locating bearing, 0 ribs on outer ring, 2 rib on inner ring, type N2 | Single Row Cylindrical Roller Bearing | Imperial Series | 5.9055 in Bore | 10.6299 in OD | 1.7717 in Width | Open | Cylindrical Bore | Machined Window Brass Cage | C0 Clearance | — | — |
| Short Description | Cylindrical roller bearing | — | — | — |
| Type Description | — | Cylindrical 1-Row | — | — |
| Number Of Rows | — | 1 | — | — |
| Tapered Bore | — | N | — | — |
| Technical Data | ||||
| d | — | — | — | 270 mm |
| Bore Diameter (D) | 150 mm | — | — | — |
| B | — | — | — | 45 mm |
| Outside Diamater (D) | 270 mm | — | — | — |
| R(Min.) | — | — | — | 3 mm |
| Total Width (B) | 45 mm | — | — | — |
| Overall Width | — | 0.000 mm | — | — |
| R1(Min.) | — | — | — | 3 mm |
| Basic Dynamic Load Rating, Radial (Cr) | 520,000 N | — | — | — |
| Radial Rating | — | 506,000 N | — | — |
| Ew | — | — | — | - mm |
| Basic Static Load Rating, Radial (C0R) | 590,000 N | — | — | — |
| Axial Rating | — | 0 N | — | — |
| Basic Load Ratings : Cr | — | — | — | 468 kN |
| Operating Temperature Min. (Tmin) | -30 °C | — | — | — |
| Dynamic Rating C1 | — | 506,000 N | — | — |
| Basic Load Ratings : C0R | — | — | — | 492 kN |
| Limiting Speed For Grease Lubrication (Ng Grea) | 3,850 1/min | — | — | — |
| Dynamic Rating C90 | — | 0 N | — | — |
| Fatigue Load Limit : Cu | — | — | — | 63.4 kN |
| Minimum Diameter Shaft Shoulder (Da) | 164 mm | — | — | — |
| Dynamic Axial Rating Ca90 | — | 0 N | — | — |
| Limiting Speeds(Grease Lub.) | — | — | — | 2200 min-1 |
| Limiting Speed (Ng Oil) | 4,550 1/min | — | — | — |
| Dynamic Axial Rating Ca1 | — | 0 N | — | — |
| Limiting Speeds(Oil Lub.) | — | — | — | 2700 min-1 |
| Operating Temperature Max. (Tmax) | 150 °C | — | — | — |
| Static Radial Rating C0 | — | 607,000 N | — | — |
| Sd1 | — | — | — | - mm |
| Axial Displacement (S1) | 4 mm | — | — | — |
| Extended Dynamic Rating Ce | — | 0 N | — | — |
| B1 | — | — | — | - mm |
| Maximum Diameter Of Housing Shoulder (Da) | 256 mm | — | — | — |
| Static Axial Rating C0A | — | 0 N | — | — |
| B2 | — | — | — | - mm |
| Minimum Chamfer Dimension (R1 Min) | 3 mm | — | — | — |
| Da(Min.) | — | — | — | - mm |
| Maximum Recess Radius (Ra1 Max) | 2.5 mm | — | — | — |
| Dc(Min.) | — | — | — | - mm |
| Raceway Diameter Outer Ring (E) | 242 mm | — | — | — |
| Dd(Min.) | — | — | — | - mm |
| Fatigue Load Limit, Radial (Cur) | 90,000 N | — | — | — |
| Da(Max.) | — | — | — | 257 mm |
| Db(Max.) | — | — | — | - mm |
| Db(Min.) | — | — | — | - mm |
| Ra(Max.) | — | — | — | 2.5 mm |
| Rb(Max.) | — | — | — | 2.5 mm |
| Temperature range | ||||
| Operating temperature min.Tmin | -30 °C | — | — | — |
| Operating temperature min.Tmin | -22 °F | — | — | — |
| Operating temperature max.Tmax | 150 °C | — | — | — |
| Operating temperature max.Tmax | 302 °F | — | — | — |
Automatic matching is a search aid, not an interchangeability declaration. Confirm the full suffix, tolerances, internal design and application limits before substitution.