Cross-brand designation analysis
COMPARE / VERIFY
Same-model Comparison
Explore products that share a base designation across loaded brands, with dimensional agreement and data gaps shown clearly.
Cross Reference centre · Interchange verification checklist · Understand suffix differences
You entered N226EMB. This table explores the base group N226; it does not preserve or approve every requested suffix. Search your complete marking first →
Automatic candidate selection
One base designation across loaded brands
Exact designations rank first. Dimensions, suffixes and other technical differences remain visible so the result is not mistaken for an interchangeability declaration.
Dimensions verified
“N226” across 5 loaded brands
At least two brands share the same bore, outside diameter and width. Use Custom Compare when you want to choose exact suffix variants yourself.
Technical comparison
Choose exact variants instead →Brand differences at a glance
| Parameter | SKFN 226 ECP130 × 230 × 40 mm | FAGN226-E-XL-TVP2130 × 230 × 40 mm | TIMKENN226EMB130 × 230 × 40 mm | NSKN226W130 × 230 × 40 mm | KOYON226130 × 230 × 40 mm |
|---|---|---|---|---|---|
| Comparable specifications | |||||
| Brand | SKF | FAG | TIMKEN | NSK | KOYO |
| Designation | N 226 ECP | N226-E-XL-TVP2 | N226EMB | N226W | N226 |
| Product family | Cylindrical roller bearings | — | Cylindrical 1-Row | Cylindrical roller bearing | Single-row / NU |
| Detailed type | Single row cylindrical roller bearing, n design | Cylindrical roller bearings | Cylindrical roller bearings | Cylindrical roller bearings | Cylindrical roller bearings |
| Series | — | N226 | EX27546 | — | — |
| Bore diameterd | 130 mm | 130 mm | 130 mm | 130 mm | 130 mm |
| Outside diameterD | 230 mm | 230 mm | 230 mm | 230 mm | 230 mm |
| WidthB | 40 mm | 40 mm | 40 mm | 40 mm | 40 mm |
| Basic dynamic load ratingC | 415 kN | 425 kN | 411 kN | 335 kN | 353 kN |
| Basic static load ratingC0 | 455 kN | 445 kN | 464 kN | 340 kN | 362 kN |
| Fatigue load limitPu | 51 kN | 71 kN | — | — | 47.9 kN |
| Reference speednref | 3200 r/min | — | — | — | — |
| Limiting speednG | 3400 r/min | — | — | — | 2700 r/min |
| Mass≈m | 6.43 kg | 6.293 kg | 7 kg | — | — |
| Precision class | — | PN — Normal (ISO 492:2023) | — | — | — |
| Internal clearance | CN | CN (Group N) — Normal internal clearance | — | — | — |
| Sealing | Without | — | — | — | — |
| Cage | Non-metallic | TVP2 — Solid Window Cage made from PA66 | — | Pressed steel | — |
| Lubricant | None | — | — | — | — |
| Minimum operating temperatureTmin | — | -30 °C | — | — | — |
| Maximum operating temperatureTmax | — | 120 °C | — | — | — |
| Boundary dimensions | |||||
| Bearing widthB | — | — | — | 40 mm | — |
| Minimum bearing chamferr min. | — | — | — | 3 mm | — |
| Minimum secondary bearing chamferr1 min. | — | — | — | 3 mm | — |
| Roller circumscribed circle diameterEw | — | — | — | 204 mm | — |
| Calculation Factors | |||||
| K Factor | — | — | 0.00 | — | — |
| Y1 Factor | — | — | 0.00 | — | — |
| Y2 Factor | — | — | 0.00 | — | — |
| Y0 Factor | — | — | 0.00 | — | — |
| E Factor | — | — | 0.00 | — | — |
| Cg Factor | — | — | 0.1130 | — | — |
| Capabilities & suitability | |||||
| Radial load capacity | — | Yes | — | — | — |
| Suitable for grease lubrication | — | Yes | — | — | — |
| Suitable for oil lubrication | — | Yes | — | — | — |
| Unsealed design | — | Yes | — | — | — |
| Catalogue reference mass | |||||
| Approximate shared-row mass — not separately stated for each rib arrangement | — | — | — | 6.48 kg | — |
| Classification | |||||
| Official Category Path | — | — | — | — | Cylindrical roller bearings - Single-row - NU |
| Official Classification 1 | — | — | — | — | Cylindrical roller bearings / Single-row / NU |
| Official Classification 2 | — | — | — | — | Cylindrical roller bearings / Single-row / N |
| Construction | |||||
| Single-row construction type | — | — | — | N | — |
| Rib arrangement | — | — | — | Two inner-ring ribs; ribless outer ring | — |
| Standard cage material | — | — | — | Pressed steel | — |
| Standard cage marking | — | — | — | W | — |
| Other cage codes listed for this catalogue row | — | — | — | M | — |
| Precision — designation omission rule | — | — | — | ISO Normal when no precision suffix is specified | — |
| Clearance identification — verify interchangeability | — | — | — | No clearance suffix shown. CN omission applies to interchangeable designs; do not infer a numerical clearance. | — |
| Optimized crowning note | — | — | — | No optimized-crowning asterisk on this row | — |
| Dimensions | |||||
| Minimum chamfer dimensionr1 min | — | 3 mm | — | — | — |
| Minimum chamfer dimensionr1 min | — | 0.118 in | — | — | — |
| Axial displacements1 | — | 1.2 mm | — | — | — |
| Axial displacements1 | — | 0.047 in | — | — | — |
| Raceway diameter outer ringE | — | 209.5 mm | — | — | — |
| Raceway diameter outer ringE | — | 8.248 in | — | — | — |
| Engineering — Abutment dimensions | |||||
| Diameter of spacer sleeved a | max. 206 mm | — | — | — | — |
| Diameter of housing abutmentD a | max. 217 mm | — | — | — | — |
| Radius of filletr a | max. 2.5 mm | — | — | — | — |
| Radius of filletr b | max. 2.5 mm | — | — | — | — |
| Engineering — Calculation data | |||||
| SKF performance class | SKF Explorer | — | — | — | — |
| Minimum load factork r | 0.12 | — | — | — | — |
| Limiting valuee | 0.2 | — | — | — | — |
| Calculation factorY | 0.6 | — | — | — | — |
| Engineering — Dimensions | |||||
| Shoulder diameter of inner ringd 1 | ≈ 164 mm | — | — | — | — |
| Raceway diameter of outer ringE | 209.5 mm | — | — | — | — |
| Chamfer dimensionr 1,2 | min. 3 mm | — | — | — | — |
| Chamfer dimensionr 3,4 | min. 3 mm | — | — | — | — |
| Permissible axial displacements | max. 2.1 mm | — | — | — | — |
| Load ratings — standard cage | |||||
| Basic dynamic radial load ratingCr | — | — | — | 335000 N | — |
| Basic static radial load ratingC0r | — | — | — | 340000 N | — |
| Logistics | |||||
| Product net weight | 6.43 kg | — | — | — | — |
| eClass code | 23-05-09-01 | — | — | — | — |
| UNSPSC code | 31171505 | — | — | — | — |
| Lubrication-qualified speed — standard cage | |||||
| Thermal speed rating — oil bath | — | — | — | 3800 r/min | — |
| Mechanical limiting speed — forced oil circulation | — | — | — | Not stated in this catalogue row | — |
| Limiting speed — grease | — | — | — | 2200 r/min | — |
| Limiting speed — oil bath | — | — | — | 2600 r/min | — |
| Main Dimensions & Performance Data | |||||
| Basic dynamic load rating, radialCr | — | 425,000 N | — | — | — |
| Basic dynamic load rating, radialCr | — | 95,548.561 lbf | — | — | — |
| Basic static load rating, radialC0r | — | 445,000 N | — | — | — |
| Basic static load rating, radialC0r | — | 100,044.964 lbf | — | — | — |
| Fatigue load limit, radialCur | — | 71,000 N | — | — | — |
| Fatigue load limit, radialCur | — | 15,962.23 lbf | — | — | — |
| Limiting speed for grease lubricationnG Grease | — | 3,400 1/min | — | — | — |
| Limiting speed for oil lubricationnG Oil | — | 4,000 1/min | — | — | — |
| Manufacturer Identity | |||||
| Schaeffler Product Code | — | 367628 | — | — | — |
| Material Number | — | — | 000000000190026687 | — | — |
| Official Class Key | — | — | — | — | 040-010-000 |
| Base Type | — | N226 | — | — | — |
| World Assembly Part Number | — | — | N226EMB | — | — |
| Gpsd Group | — | F01 | — | — | — |
| Inner Ring Part Number | — | — | 130ARNE02 | — | — |
| Product Line Id | — | 63 | — | — | — |
| Outer Ring Part Number | — | — | 130ERNE02 | — | — |
| Drawing Number | — | — | M943660 | — | — |
| Upc | — | — | 0013992135711 | — | — |
| Official Source System | — | — | CORE BP - DS DF | — | — |
| Official Last Run | — | — | 2026-08-23T20:02:48.507 | — | — |
| SAP material number | — | 0167339080000 | — | — | — |
| Base product | — | 2305090101 | — | — | — |
| Bearing X designation | — | N226-E-XL-TVP2 | — | — | — |
| Mounting Manager ID | — | N226-E-XL-TVP2 | — | — | — |
| Grease application ID | — | N226-E-XL-TVP2 | — | — | — |
| Mounting dimensions | |||||
| Diameter shaft shoulderda | — | 144 mm | — | — | — |
| Diameter shaft shoulderda | — | 5.669 in | — | — | — |
| Diameter of housing shoulderDa | — | 216 mm | — | — | — |
| Diameter of housing shoulderDa | — | 8.504 in | — | — | — |
| Maximum recess radiusra1 max | — | 2.5 mm | — | — | — |
| Maximum recess radiusra1 max | — | 0.098 in | — | — | — |
| Mounting dimensions — shown arrangement | |||||
| Minimum shaft shoulder diameterda min. | — | — | — | 143 mm | — |
| Maximum housing shoulder diameterDb max. | — | — | — | 217 mm | — |
| Minimum housing shoulder diameterDb min. | — | — | — | 208 mm | — |
| Maximum adjacent fillet radiusra max. | — | — | — | 2.5 mm | — |
| Maximum secondary adjacent fillet radiusrb max. | — | — | — | 2.5 mm | — |
| Product characteristics | |||||
| Tolerance classPN | — | Normal (ISO 492:2023) | — | — | — |
| Change markE | — | Increased Capacity Design | — | — | — |
| Radial internal clearanceCN (Group N) | — | Normal internal clearance | — | — | — |
| Number of rows1 | — | Single-row design | — | — | — |
| Product identity | |||||
| Official product category | Cylindrical roller bearings | — | — | — | — |
| Official taxonomy path | /products/rolling-bearings/roller-bearings/cylindrical-roller-bearings/single-row-cylindrical-roller-bearings | — | — | — | — |
| Structure group ID | BC1_001_101 | — | — | — | — |
| Available from SKF | Yes | — | — | — | — |
| Remanufacturable | No | — | — | — | — |
| Product Identity | |||||
| Construction | — | Cylindrical roller bearing N2..-E-TVP, with cage, single row, non-locating bearing, 0 ribs on outer ring, 2 rib on inner ring, type N2 | — | — | — |
| Short Description | — | Cylindrical roller bearing | — | — | — |
| Type Description | — | — | Cylindrical 1-Row | — | — |
| Number Of Rows | 1 | — | 1 | — | — |
| Tapered Bore | — | — | N | — | — |
| Properties | |||||
| Bearing part | Complete bearing | — | — | — | — |
| Axial displacement capability | In both directions | — | — | — | — |
| Locating feature, bearing outer ring | Without | — | — | — | — |
| Bore type | Cylindrical | — | — | — | — |
| Number of flanges, outer ring | 0 | — | — | — | — |
| Number of flanges, inner ring | 2 | — | — | — | — |
| Loose flange | None | — | — | — | — |
| Radial internal clearance | CN | — | — | — | — |
| Tolerance class | Normal | — | — | — | — |
| Coating | Without | — | — | — | — |
| Relubrication feature | Without | — | — | — | — |
| Indicative carbon footprint for new product | 23.8 kg CO 2 e | — | — | — | — |
| Technical Data | |||||
| d | — | — | — | — | 230 mm |
| Bore Diameter (D) | — | 130 mm | — | — | — |
| B | — | — | — | — | 40 mm |
| Outside Diamater (D) | — | 230 mm | — | — | — |
| Overall Width | — | — | 0.000 mm | — | — |
| R(Min.) | — | — | — | — | 3 mm |
| Total Width (B) | — | 40 mm | — | — | — |
| Radial Rating | — | — | 411,000 N | — | — |
| R1(Min.) | — | — | — | — | 3 mm |
| Basic Dynamic Load Rating, Radial (Cr) | — | 425,000 N | — | — | — |
| Axial Rating | — | — | 0 N | — | — |
| Ew | — | — | — | — | - mm |
| Basic Static Load Rating, Radial (C0R) | — | 445,000 N | — | — | — |
| Dynamic Rating C1 | — | — | 411,000 N | — | — |
| Basic Load Ratings : Cr | — | — | — | — | 353 kN |
| Operating Temperature Min. (Tmin) | — | -30 °C | — | — | — |
| Dynamic Rating C90 | — | — | 0 N | — | — |
| Basic Load Ratings : C0R | — | — | — | — | 362 kN |
| Limiting Speed For Grease Lubrication (Ng Grea) | — | 3,400 1/min | — | — | — |
| Dynamic Axial Rating Ca90 | — | — | 0 N | — | — |
| Fatigue Load Limit : Cu | — | — | — | — | 47.9 kN |
| Minimum Diameter Shaft Shoulder (Da) | — | 144 mm | — | — | — |
| Dynamic Axial Rating Ca1 | — | — | 0 N | — | — |
| Limiting Speeds(Grease Lub.) | — | — | — | — | 2700 min-1 |
| Limiting Speed (Ng Oil) | — | 4,000 1/min | — | — | — |
| Static Radial Rating C0 | — | — | 464,000 N | — | — |
| Limiting Speeds(Oil Lub.) | — | — | — | — | 3200 min-1 |
| Operating Temperature Max. (Tmax) | — | 120 °C | — | — | — |
| Extended Dynamic Rating Ce | — | — | 0 N | — | — |
| Sd1 | — | — | — | — | - mm |
| Axial Displacement (S1) | — | 1.2 mm | — | — | — |
| Static Axial Rating C0A | — | — | 0 N | — | — |
| B1 | — | — | — | — | - mm |
| Maximum Diameter Of Housing Shoulder (Da) | — | 216 mm | — | — | — |
| B2 | — | — | — | — | - mm |
| Minimum Chamfer Dimension (R1 Min) | — | 3 mm | — | — | — |
| Da(Min.) | — | — | — | — | - mm |
| Maximum Recess Radius (Ra1 Max) | — | 2.5 mm | — | — | — |
| Dc(Min.) | — | — | — | — | - mm |
| Raceway Diameter Outer Ring (E) | — | 209.5 mm | — | — | — |
| Dd(Min.) | — | — | — | — | - mm |
| Fatigue Load Limit, Radial (Cur) | — | 71,000 N | — | — | — |
| Da(Max.) | — | — | — | — | 217 mm |
| Db(Max.) | — | — | — | — | - mm |
| Db(Min.) | — | — | — | — | - mm |
| Ra(Max.) | — | — | — | — | 2.5 mm |
| Rb(Max.) | — | — | — | — | 2.5 mm |
| Temperature range | |||||
| Operating temperature min.Tmin | — | -30 °C | — | — | — |
| Operating temperature min.Tmin | — | -22 °F | — | — | — |
| Operating temperature max.Tmax | — | 120 °C | — | — | — |
| Operating temperature max.Tmax | — | 248 °F | — | — | — |
Automatic matching is a search aid, not an interchangeability declaration. Confirm the full suffix, tolerances, internal design and application limits before substitution.