Cross-brand designation analysis
COMPARE / VERIFY
Same-model Comparison
Explore products that share a base designation across loaded brands, with dimensional agreement and data gaps shown clearly.
Automatic candidate selection
One base designation across loaded brands
Exact designations rank first. Dimensions, suffixes and other technical differences remain visible so the result is not mistaken for an interchangeability declaration.
Dimensions verified
“N220” across 4 loaded brands
At least two brands share the same bore, outside diameter and width. Use Custom Compare when you want to choose exact suffix variants yourself.
Technical comparison
Choose exact variants instead →Brand differences at a glance
| Parameter | SKFN 220 ECP100 × 180 × 34 mm | FAGN220-E-XL-M1-C5100 × 180 × 34 mm | NSKN220W100 × 180 × 34 mm | KOYON220100 × 180 × 34 mm |
|---|---|---|---|---|
| Comparable specifications | ||||
| Brand | SKF | FAG | NSK | KOYO |
| Designation | N 220 ECP | N220-E-XL-M1-C5 | N220W | N220 |
| Product family | Cylindrical roller bearings | — | Cylindrical roller bearing | Single-row / NU |
| Detailed type | Single row cylindrical roller bearing, n design | Cylindrical roller bearings | Cylindrical roller bearings | Cylindrical roller bearings |
| Bore diameterd | 100 mm | 100 mm | 100 mm | 100 mm |
| Outside diameterD | 180 mm | 180 mm | 180 mm | 180 mm |
| WidthB | 34 mm | 34 mm | 34 mm | 34 mm |
| Basic dynamic load ratingC | 285 kN | 2950 kN | 225 kN | 229 kN |
| Basic static load ratingC0 | 305 kN | 305 kN | 217 kN | 217 kN |
| Fatigue load limitPu | 36.5 kN | 51 kN | — | 28.1 kN |
| Reference speednref | 4000 r/min | — | — | — |
| Limiting speednG | 4500 r/min | — | — | 3500 r/min |
| Mass≈m | 3.44 kg | 3.81 kg | — | — |
| Precision class | — | PN — Normal (ISO 492:2023) | — | — |
| Internal clearance | CN | — | — | — |
| Sealing | Without | — | — | — |
| Cage | Non-metallic | M1 — Two Piece Brass Cage Roller Guided | Pressed steel | — |
| Lubricant | None | — | — | — |
| Minimum operating temperatureTmin | — | -30 °C | — | — |
| Maximum operating temperatureTmax | — | 150 °C | — | — |
| Boundary dimensions | ||||
| Bearing widthB | — | — | 34 mm | — |
| Minimum bearing chamferr min. | — | — | 2.1 mm | — |
| Minimum secondary bearing chamferr1 min. | — | — | 2.1 mm | — |
| Roller circumscribed circle diameterEw | — | — | 160 mm | — |
| Capabilities & suitability | ||||
| Radial load capacity | — | Yes | — | — |
| Suitable for grease lubrication | — | Yes | — | — |
| Suitable for oil lubrication | — | Yes | — | — |
| Unsealed design | — | Yes | — | — |
| Catalogue reference mass | ||||
| Approximate shared-row mass — not separately stated for each rib arrangement | — | — | 3.36 kg | — |
| Classification | ||||
| Official Category Path | — | — | — | Cylindrical roller bearings - Single-row - NU |
| Official Classification 1 | — | — | — | Cylindrical roller bearings / Single-row / NU |
| Official Classification 2 | — | — | — | Cylindrical roller bearings / Single-row / N |
| Construction | ||||
| Single-row construction type | — | — | N | — |
| Rib arrangement | — | — | Two inner-ring ribs; ribless outer ring | — |
| Standard cage material | — | — | Pressed steel | — |
| Standard cage marking | — | — | W | — |
| Other cage codes listed for this catalogue row | — | — | M | — |
| Precision — designation omission rule | — | — | ISO Normal when no precision suffix is specified | — |
| Clearance identification — verify interchangeability | — | — | No clearance suffix shown. CN omission applies to interchangeable designs; do not infer a numerical clearance. | — |
| Optimized crowning note | — | — | No optimized-crowning asterisk on this row | — |
| Dimensions | ||||
| Raceway diameter outer ringE | — | 163 mm | — | — |
| Raceway diameter outer ringE | — | 6.417 in | — | — |
| Engineering — Abutment dimensions | ||||
| Diameter of spacer sleeved a | max. 160 mm | — | — | — |
| Diameter of housing abutmentD a | max. 168 mm | — | — | — |
| Radius of filletr a | max. 2 mm | — | — | — |
| Radius of filletr b | max. 2 mm | — | — | — |
| Engineering — Calculation data | ||||
| SKF performance class | SKF Explorer | — | — | — |
| Minimum load factork r | 0.12 | — | — | — |
| Limiting valuee | 0.2 | — | — | — |
| Calculation factorY | 0.6 | — | — | — |
| Engineering — Dimensions | ||||
| Shoulder diameter of inner ringd 1 | ≈ 127 mm | — | — | — |
| Raceway diameter of outer ringE | 163 mm | — | — | — |
| Chamfer dimensionr 1,2 | min. 2.1 mm | — | — | — |
| Chamfer dimensionr 3,4 | min. 2.1 mm | — | — | — |
| Permissible axial displacements | max. 1.7 mm | — | — | — |
| Load ratings — standard cage | ||||
| Basic dynamic radial load ratingCr | — | — | 225000 N | — |
| Basic static radial load ratingC0r | — | — | 217000 N | — |
| Logistics | ||||
| Product net weight | 3.44 kg | — | — | — |
| eClass code | 23-05-09-01 | — | — | — |
| UNSPSC code | 31171505 | — | — | — |
| Lubrication-qualified speed — standard cage | ||||
| Thermal speed rating — oil bath | — | — | 4500 r/min | — |
| Mechanical limiting speed — forced oil circulation | — | — | Not stated in this catalogue row | — |
| Limiting speed — grease | — | — | 2800 r/min | — |
| Limiting speed — oil bath | — | — | 3400 r/min | — |
| Main Dimensions & Performance Data | ||||
| Basic dynamic load rating, radialCr | — | 2,950,000 N | — | — |
| Basic dynamic load rating, radialCr | — | 663,219.424 lbf | — | — |
| Basic static load rating, radialC0r | — | 305,000 N | — | — |
| Basic static load rating, radialC0r | — | 68,570.144 lbf | — | — |
| Fatigue load limit, radialCur | — | 51,000 N | — | — |
| Fatigue load limit, radialCur | — | 11,465.827 lbf | — | — |
| Manufacturer Identity | ||||
| Schaeffler Product Code | — | 2053040 | — | — |
| Official Class Key | — | — | — | 040-010-000 |
| Gpsd Group | — | F01 | — | — |
| Product Line Id | — | 63 | — | — |
| SAP material number | — | 0192176500050 | — | — |
| Base product | — | 2305090101 | — | — |
| Bearing X designation | — | N220-E-XL-M1-C5 | — | — |
| Mounting Manager ID | — | N220-E-XL-M1-C5 | — | — |
| Grease application ID | — | N220-E-XL-M1-C5 | — | — |
| Mounting dimensions | ||||
| Diameter shaft shoulderda | — | 112 mm | — | — |
| Diameter shaft shoulderda | — | 4.409 in | — | — |
| Diameter of housing shoulderDa | — | 168 mm | — | — |
| Diameter of housing shoulderDa | — | 6.614 in | — | — |
| Mounting dimensions — shown arrangement | ||||
| Minimum shaft shoulder diameterda min. | — | — | 111 mm | — |
| Maximum housing shoulder diameterDb max. | — | — | 169 mm | — |
| Minimum housing shoulder diameterDb min. | — | — | 163 mm | — |
| Maximum adjacent fillet radiusra max. | — | — | 2 mm | — |
| Maximum secondary adjacent fillet radiusrb max. | — | — | 2 mm | — |
| Product characteristics | ||||
| Tolerance classPN | — | Normal (ISO 492:2023) | — | — |
| Change markE | — | Increased Capacity Design | — | — |
| Number of rows1 | — | Single-row design | — | — |
| Product identity | ||||
| Official product category | Cylindrical roller bearings | — | — | — |
| Official taxonomy path | /products/rolling-bearings/roller-bearings/cylindrical-roller-bearings/single-row-cylindrical-roller-bearings | — | — | — |
| Structure group ID | BC1_001_101 | — | — | — |
| Available from SKF | Yes | — | — | — |
| Remanufacturable | No | — | — | — |
| Product Identity | ||||
| Construction | — | Cylindrical roller bearing N2..-M1, with cage, single row, non-locating bearing, 0 ribs on outer ring, 2 rib on inner ring, type N2 | — | — |
| Short Description | — | Cylindrical roller bearing | — | — |
| Properties | ||||
| Bearing part | Complete bearing | — | — | — |
| Axial displacement capability | In both directions | — | — | — |
| Number of rows | 1 | — | — | — |
| Locating feature, bearing outer ring | Without | — | — | — |
| Bore type | Cylindrical | — | — | — |
| Number of flanges, outer ring | 0 | — | — | — |
| Number of flanges, inner ring | 2 | — | — | — |
| Loose flange | None | — | — | — |
| Radial internal clearance | CN | — | — | — |
| Tolerance class | Normal | — | — | — |
| Coating | Without | — | — | — |
| Relubrication feature | Without | — | — | — |
| Indicative carbon footprint for new product | 12.7 kg CO 2 e | — | — | — |
| Technical Data | ||||
| d | — | — | — | 180 mm |
| Bore Diameter (D) | — | 100 mm | — | — |
| Outside Diamater (D) | — | 180 mm | — | — |
| B | — | — | — | 34 mm |
| Total Width (B) | — | 34 mm | — | — |
| R(Min.) | — | — | — | 2.1 mm |
| Basic Dynamic Load Rating, Radial (Cr) | — | 2,950,000 N | — | — |
| R1(Min.) | — | — | — | 2.1 mm |
| Basic Static Load Rating, Radial (C0R) | — | 305,000 N | — | — |
| Ew | — | — | — | - mm |
| Operating Temperature Min. (Tmin) | — | -30 °C | — | — |
| Basic Load Ratings : Cr | — | — | — | 229 kN |
| Minimum Diameter Shaft Shoulder (Da) | — | 112 mm | — | — |
| Basic Load Ratings : C0R | — | — | — | 217 kN |
| Operating Temperature Max. (Tmax) | — | 150 °C | — | — |
| Fatigue Load Limit : Cu | — | — | — | 28.1 kN |
| Maximum Diameter Of Housing Shoulder (Da) | — | 168 mm | — | — |
| Limiting Speeds(Grease Lub.) | — | — | — | 3500 min-1 |
| Raceway Diameter Outer Ring (E) | — | 163 mm | — | — |
| Limiting Speeds(Oil Lub.) | — | — | — | 4200 min-1 |
| Fatigue Load Limit, Radial (Cur) | — | 51,000 N | — | — |
| Sd1 | — | — | — | - mm |
| B1 | — | — | — | - mm |
| B2 | — | — | — | - mm |
| Da(Min.) | — | — | — | - mm |
| Dc(Min.) | — | — | — | - mm |
| Dd(Min.) | — | — | — | - mm |
| Da(Max.) | — | — | — | 169 mm |
| Db(Max.) | — | — | — | - mm |
| Db(Min.) | — | — | — | - mm |
| Ra(Max.) | — | — | — | 2 mm |
| Rb(Max.) | — | — | — | 2 mm |
| Temperature range | ||||
| Operating temperature min.Tmin | — | -30 °C | — | — |
| Operating temperature min.Tmin | — | -22 °F | — | — |
| Operating temperature max.Tmax | — | 150 °C | — | — |
| Operating temperature max.Tmax | — | 302 °F | — | — |
Automatic matching is a search aid, not an interchangeability declaration. Confirm the full suffix, tolerances, internal design and application limits before substitution.