Cross-brand designation analysis
COMPARE / VERIFY
Same-model Comparison
Explore products that share a base designation across loaded brands, with dimensional agreement and data gaps shown clearly.
Cross Reference centre · Interchange verification checklist · Understand suffix differences
You entered N1034-K-M1-SP. This table explores the base group N1034; it does not preserve or approve every requested suffix. Search your complete marking first →
Automatic candidate selection
One base designation across loaded brands
Exact designations rank first. Dimensions, suffixes and other technical differences remain visible so the result is not mistaken for an interchangeability declaration.
Designation candidates
“N1034” across 2 loaded brands
One highest-ranked designation candidate is shown per manufacturer. Use Custom Compare when you want to choose exact suffix variants yourself.
Technical comparison
Choose exact variants instead →Brand differences at a glance
| Parameter | FAGN1034-K-M1-SP170 × 260 × 42 mm | NSKN1034170 × 260 × 42 mm |
|---|---|---|
| Comparable specifications | ||
| Brand | FAG | NSK |
| Designation | N1034-K-M1-SP | N1034 |
| Product family | — | Cylindrical roller bearing |
| Detailed type | Cylindrical roller bearings | Cylindrical roller bearings |
| Series | N1034 | — |
| Bore diameterd | 170 mm | 170 mm |
| Outside diameterD | 260 mm | 260 mm |
| WidthB | 42 mm | 42 mm |
| Basic dynamic load ratingC | 295 kN | 355 kN |
| Basic static load ratingC0 | 435 kN | 415 kN |
| Fatigue load limitPu | 52 kN | — |
| Mass≈m | 7.77 kg | — |
| Precision class | SP — Tolerance class SP | — |
| Internal clearance | C1 (Group 1) — Internal clearance smaller than C2 | — |
| Cage | M1 — Two Piece Brass Cage Roller Guided | Machined brass |
| Minimum operating temperatureTmin | -30 °C | — |
| Maximum operating temperatureTmax | 150 °C | — |
| Boundary dimensions | ||
| Bearing widthB | — | 42 mm |
| Minimum bearing chamferr min. | — | 2.1 mm |
| Minimum secondary bearing chamferr1 min. | — | 2.1 mm |
| Roller circumscribed circle diameterEw | — | 237 mm |
| Capabilities & suitability | ||
| Radial load capacity | Yes | — |
| Suitable for grease lubrication | Yes | — |
| Suitable for oil lubrication | Yes | — |
| Unsealed design | Yes | — |
| Catalogue reference mass | ||
| Approximate shared-row mass — not separately stated for each rib arrangement | — | 7.91 kg |
| Construction | ||
| Single-row construction type | — | N |
| Rib arrangement | — | Two inner-ring ribs; ribless outer ring |
| Standard cage material | — | Machined brass |
| Standard cage marking | — | M is usually omitted for this series |
| Other cage codes listed for this catalogue row | — | None listed in this row |
| Precision — designation omission rule | — | ISO Normal when no precision suffix is specified |
| Clearance identification — verify interchangeability | — | No clearance suffix shown. CN omission applies to interchangeable designs; do not infer a numerical clearance. |
| Optimized crowning note | — | No optimized-crowning asterisk on this row |
| Dimensions | ||
| Minimum chamfer dimensionr1 min | 2.1 mm | — |
| Minimum chamfer dimensionr1 min | 0.083 in | — |
| Axial displacements1 | 5 mm | — |
| Axial displacements1 | 0.197 in | — |
| Axial displacements2 | 5 mm | — |
| Axial displacements2 | 0.197 in | — |
| Raceway diameter outer ringE | 237 mm | — |
| Raceway diameter outer ringE | 9.331 in | — |
| Load ratings — standard cage | ||
| Basic dynamic radial load ratingCr | — | 355000 N |
| Basic static radial load ratingC0r | — | 415000 N |
| Lubrication-qualified speed — standard cage | ||
| Thermal speed rating — oil bath | — | 3200 r/min |
| Mechanical limiting speed — forced oil circulation | — | Not stated in this catalogue row |
| Limiting speed — grease | — | 2400 r/min |
| Limiting speed — oil bath | — | 2800 r/min |
| Main Dimensions & Performance Data | ||
| Basic dynamic load rating, radialCr | 295,000 N | — |
| Basic dynamic load rating, radialCr | 66,321.942 lbf | — |
| Basic static load rating, radialC0r | 435,000 N | — |
| Basic static load rating, radialC0r | 97,796.763 lbf | — |
| Fatigue load limit, radialCur | 52,000 N | — |
| Fatigue load limit, radialCur | 11,690.647 lbf | — |
| Limiting speed for grease lubricationnG Grease | 3,600 1/min | — |
| Limiting speed for oil lubricationnG Oil | 4,250 1/min | — |
| Manufacturer Identity | ||
| Schaeffler Product Code | 1741385 | — |
| Base Type | N1034 | — |
| Product Line Id | 39 | — |
| Base product | 2305090107 | — |
| Bearing X designation | N1034-K-M1-SP | — |
| Mounting Manager ID | N1034-K-M1-SP | — |
| Mounting dimensions | ||
| Diameter shaft shoulderda | 193 mm | — |
| Diameter shaft shoulderda | 7.598 in | — |
| Diameter shaft shoulder tolerance | h12 | — |
| Diameter of housing shoulderDa | 239.7 mm | — |
| Diameter of housing shoulderDa | 9.437 in | — |
| Diameter of housing shoulder tolerance | H12 | — |
| Injection pitch diameter minEtk 1 nom | 231.5 mm | — |
| Injection pitch diameter minEtk 1 nom | 9.114 in | — |
| Maximum recess radiusra1 max | 2.1 mm | — |
| Maximum recess radiusra1 max | 0.083 in | — |
| Mounting dimensions — shown arrangement | ||
| Minimum shaft shoulder diameterda min. | — | 181 mm |
| Maximum housing shoulder diameterDb max. | — | 249 mm |
| Minimum housing shoulder diameterDb min. | — | 239 mm |
| Maximum adjacent fillet radiusra max. | — | 2 mm |
| Maximum secondary adjacent fillet radiusrb max. | — | 2 mm |
| Product characteristics | ||
| Tolerance classSP | Tolerance class SP | — |
| Bore typeK | Tapered, taper 1:12 | — |
| Radial internal clearanceC1 (Group 1) | Internal clearance smaller than C2 | — |
| Number of rows1 | Single-row design | — |
| Product Identity | ||
| Construction | Super precision cylindrical roller bearings N10..-K-M1-SP, non-locating bearing, with tapered bore, taper 1:12, separable, with cage | — |
| Short Description | Cylindrical roller bearing | — |
| Technical Data | ||
| Bore Diameter (D) | 170 mm | — |
| Outside Diamater (D) | 260 mm | — |
| Total Width (B) | 42 mm | — |
| Basic Dynamic Load Rating, Radial (Cr) | 295,000 N | — |
| Basic Static Load Rating, Radial (C0R) | 435,000 N | — |
| Operating Temperature Min. (Tmin) | -30 °C | — |
| Limiting Speed For Grease Lubrication (Ng Grea) | 3,600 1/min | — |
| Minimum Diameter Shaft Shoulder (Da) | 193 mm | — |
| Limiting Speed (Ng Oil) | 4,250 1/min | — |
| Operating Temperature Max. (Tmax) | 150 °C | — |
| Axial Displacement (S1) | 5 mm | — |
| Maximum Diameter Of Housing Shoulder (Da) | 239.7 mm | — |
| Minimum Chamfer Dimension (R1 Min) | 2.1 mm | — |
| Injection Pitch Diameter Min (Etk 1 N) | 231.5 mm | — |
| Maximum Recess Radius (Ra1 Max) | 2.1 mm | — |
| Raceway Diameter Outer Ring (E) | 237 mm | — |
| Axial Displacement (S2) | 5 mm | — |
| Fatigue Load Limit, Radial (Cur) | 52,000 N | — |
| Temperature range | ||
| Operating temperature min.Tmin | -30 °C | — |
| Operating temperature min.Tmin | -22 °F | — |
| Operating temperature max.Tmax | 150 °C | — |
| Operating temperature max.Tmax | 302 °F | — |
Automatic matching is a search aid, not an interchangeability declaration. Confirm the full suffix, tolerances, internal design and application limits before substitution.