Cross-brand designation analysis
COMPARE / VERIFY
Same-model Comparison
Explore products that share a base designation across loaded brands, with dimensional agreement and data gaps shown clearly.
Cross Reference centre · Interchange verification checklist · Understand suffix differences
You entered N1007-D-K-TVP-SP-XL. This table explores the base group N1007; it does not preserve or approve every requested suffix. Search your complete marking first →
Automatic candidate selection
One base designation across loaded brands
Exact designations rank first. Dimensions, suffixes and other technical differences remain visible so the result is not mistaken for an interchangeability declaration.
Designation candidates
“N1007” across 2 loaded brands
One highest-ranked designation candidate is shown per manufacturer. Use Custom Compare when you want to choose exact suffix variants yourself.
Technical comparison
Choose exact variants instead →Brand differences at a glance
| Parameter | FAGN1007-D-K-TVP-SP-XL35 × 62 × 14 mm | NSKN100735 × 62 × 14 mm |
|---|---|---|
| Comparable specifications | ||
| Brand | FAG | NSK |
| Designation | N1007-D-K-TVP-SP-XL | N1007 |
| Product family | — | Cylindrical roller bearing |
| Detailed type | Cylindrical roller bearings | Cylindrical roller bearings |
| Series | N1007 | — |
| Bore diameterd | 35 mm | 35 mm |
| Outside diameterD | 62 mm | 62 mm |
| WidthB | 14 mm | 14 mm |
| Basic dynamic load ratingC | 23.6 kN | 27.8 kN |
| Basic static load ratingC0 | 20.9 kN | 23.2 kN |
| Fatigue load limitPu | 3.35 kN | — |
| Mass≈m | 0.15501 kg | — |
| Precision class | SP — Tolerance class SP | — |
| Internal clearance | C1 (Group 1) — Internal clearance smaller than C2 | — |
| Cage | TVP — Plastic cage | Machined brass |
| Minimum operating temperatureTmin | -30 °C | — |
| Maximum operating temperatureTmax | 120 °C | — |
| Boundary dimensions | ||
| Bearing widthB | — | 14 mm |
| Minimum bearing chamferr min. | — | 1 mm |
| Minimum secondary bearing chamferr1 min. | — | 0.6 mm |
| Roller circumscribed circle diameterEw | — | 55 mm |
| Capabilities & suitability | ||
| Radial load capacity | Yes | — |
| Suitable for grease lubrication | Yes | — |
| Suitable for oil lubrication | Yes | — |
| Unsealed design | Yes | — |
| Catalogue reference mass | ||
| Approximate shared-row mass — not separately stated for each rib arrangement | — | 0.18 kg |
| Construction | ||
| Single-row construction type | — | N |
| Rib arrangement | — | Two inner-ring ribs; ribless outer ring |
| Standard cage material | — | Machined brass |
| Standard cage marking | — | M is usually omitted for this series |
| Other cage codes listed for this catalogue row | — | None listed in this row |
| Precision — designation omission rule | — | ISO Normal when no precision suffix is specified |
| Clearance identification — verify interchangeability | — | No clearance suffix shown. CN omission applies to interchangeable designs; do not infer a numerical clearance. |
| Optimized crowning note | — | No optimized-crowning asterisk on this row |
| Dimensions | ||
| Minimum chamfer dimensionr1 min | 0.6 mm | — |
| Minimum chamfer dimensionr1 min | 0.024 in | — |
| Axial displacements1 | 2.8 mm | — |
| Axial displacements1 | 0.11 in | — |
| Axial displacements2 | 2.8 mm | — |
| Axial displacements2 | 0.11 in | — |
| Raceway diameter outer ringE | 55 mm | — |
| Raceway diameter outer ringE | 2.165 in | — |
| Load ratings — standard cage | ||
| Basic dynamic radial load ratingCr | — | 27800 N |
| Basic static radial load ratingC0r | — | 23200 N |
| Lubrication-qualified speed — standard cage | ||
| Thermal speed rating — oil bath | — | 11000 r/min |
| Mechanical limiting speed — forced oil circulation | — | Not stated in this catalogue row |
| Limiting speed — grease | — | 11000 r/min |
| Limiting speed — oil bath | — | 13000 r/min |
| Main Dimensions & Performance Data | ||
| Basic dynamic load rating, radialCr | 23,600 N | — |
| Basic dynamic load rating, radialCr | 5,305.755 lbf | — |
| Basic static load rating, radialC0r | 20,900 N | — |
| Basic static load rating, radialC0r | 4,698.741 lbf | — |
| Fatigue load limit, radialCur | 3,350 N | — |
| Fatigue load limit, radialCur | 753.147 lbf | — |
| Limiting speed for grease lubricationnG Grease | 18,700 1/min | — |
| Limiting speed for oil lubricationnG Oil | 22,000 1/min | — |
| Manufacturer Identity | ||
| Schaeffler Product Code | 367300 | — |
| Base Type | N1007 | — |
| Gpsd Group | F07 | — |
| Product Line Id | 39 | — |
| X Life Marking | XL | — |
| SAP material number | 0877219100000 | — |
| Base product | 2305090107 | — |
| Bearing X designation | N1007-D-K-TVP-SP-XL | — |
| Mounting Manager ID | N1007-D-K-TVP-SP-XL | — |
| Mounting dimensions | ||
| Diameter shaft shoulderda | 43 mm | — |
| Diameter shaft shoulderda | 1.693 in | — |
| Diameter shaft shoulder tolerance | h12 | — |
| Diameter of housing shoulderDa | 56 mm | — |
| Diameter of housing shoulderDa | 2.205 in | — |
| Diameter of housing shoulder tolerance | H12 | — |
| Injection pitch diameter minEtk 1 nom | 53.9 mm | — |
| Injection pitch diameter minEtk 1 nom | 2.122 in | — |
| Maximum recess radiusra1 max | 0.6 mm | — |
| Maximum recess radiusra1 max | 0.024 in | — |
| Mounting dimensions — shown arrangement | ||
| Minimum shaft shoulder diameterda min. | — | 40 mm |
| Maximum housing shoulder diameterDb max. | — | 58 mm |
| Minimum housing shoulder diameterDb min. | — | 56 mm |
| Maximum adjacent fillet radiusra max. | — | 1 mm |
| Maximum secondary adjacent fillet radiusrb max. | — | 0.6 mm |
| Product characteristics | ||
| Tolerance classSP | Tolerance class SP | — |
| Bore typeK | Tapered, taper 1:12 | — |
| Change markD | Internal Variant D | — |
| Radial internal clearanceC1 (Group 1) | Internal clearance smaller than C2 | — |
| Number of rows1 | Single-row design | — |
| Product Identity | ||
| Construction | Super precision cylindrical roller bearings N10..-D-K-TVP-SP, non-locating bearing, with tapered bore, taper 1:12, separable, with cage | — |
| Short Description | Cylindrical roller bearing | — |
| Technical Data | ||
| Bore Diameter (D) | 35 mm | — |
| Outside Diamater (D) | 62 mm | — |
| Total Width (B) | 14 mm | — |
| Basic Dynamic Load Rating, Radial (Cr) | 23,600 N | — |
| Basic Static Load Rating, Radial (C0R) | 20,900 N | — |
| Operating Temperature Min. (Tmin) | -30 °C | — |
| Limiting Speed For Grease Lubrication (Ng Grea) | 18,700 1/min | — |
| Minimum Diameter Shaft Shoulder (Da) | 43 mm | — |
| Limiting Speed (Ng Oil) | 22,000 1/min | — |
| Operating Temperature Max. (Tmax) | 120 °C | — |
| Axial Displacement (S1) | 2.8 mm | — |
| Maximum Diameter Of Housing Shoulder (Da) | 56 mm | — |
| Minimum Chamfer Dimension (R1 Min) | 0.6 mm | — |
| Injection Pitch Diameter Min (Etk 1 N) | 53.9 mm | — |
| Maximum Recess Radius (Ra1 Max) | 0.6 mm | — |
| Raceway Diameter Outer Ring (E) | 55 mm | — |
| Axial Displacement (S2) | 2.8 mm | — |
| Fatigue Load Limit, Radial (Cur) | 3,350 N | — |
| Temperature range | ||
| Operating temperature min.Tmin | -30 °C | — |
| Operating temperature min.Tmin | -22 °F | — |
| Operating temperature max.Tmax | 120 °C | — |
| Operating temperature max.Tmax | 248 °F | — |
Automatic matching is a search aid, not an interchangeability declaration. Confirm the full suffix, tolerances, internal design and application limits before substitution.