Cross-brand designation analysis
COMPARE / VERIFY
Same-model Comparison
Explore products that share a base designation across loaded brands, with dimensional agreement and data gaps shown clearly.
Cross Reference centre · Interchange verification checklist · Understand suffix differences
You entered N-326-ECM. This table explores the base group N326; it does not preserve or approve every requested suffix. Search your complete marking first →
Automatic candidate selection
One base designation across loaded brands
Exact designations rank first. Dimensions, suffixes and other technical differences remain visible so the result is not mistaken for an interchangeability declaration.
Dimensions verified
“N326” across 4 loaded brands
At least two brands share the same bore, outside diameter and width. Use Custom Compare when you want to choose exact suffix variants yourself.
Technical comparison
Choose exact variants instead →Brand differences at a glance
| Parameter | SKFN 326 ECM130 × 280 × 58 mm | FAGN326-E-XL-M1130 × 280 × 58 mm | NSKN326M130 × 280 × 58 mm | KOYON326130 × 280 × 58 mm |
|---|---|---|---|---|
| Comparable specifications | ||||
| Brand | SKF | FAG | NSK | KOYO |
| Designation | N 326 ECM | N326-E-XL-M1 | N326M | N326 |
| Product family | Cylindrical roller bearings | — | Cylindrical roller bearing | Single-row / NU |
| Detailed type | Single row cylindrical roller bearing, n design | Cylindrical roller bearings | Cylindrical roller bearings | Cylindrical roller bearings |
| Series | — | N326 | — | — |
| Bore diameterd | 130 mm | 130 mm | 130 mm | 130 mm |
| Outside diameterD | 280 mm | 280 mm | 280 mm | 280 mm |
| WidthB | 58 mm | 58 mm | 58 mm | 58 mm |
| Basic dynamic load ratingC | 720 kN | 720 kN | 685 kN | 699 kN |
| Basic static load ratingC0 | 750 kN | 720 kN | 665 kN | 667 kN |
| Fatigue load limitPu | 81.5 kN | 115 kN | — | 85.7 kN |
| Reference speednref | 2400 r/min | — | — | — |
| Limiting speednG | 3000 r/min | — | — | 2100 r/min |
| Mass≈m | 17.9 kg | 17.84 kg | — | — |
| Precision class | — | PN — Normal (ISO 492:2023) | — | — |
| Internal clearance | CN | CN (Group N) — Normal internal clearance | — | — |
| Sealing | Without | — | — | — |
| Cage | Machined brass | M1 — Two Piece Brass Cage Roller Guided | Machined brass | — |
| Lubricant | None | — | — | — |
| Minimum operating temperatureTmin | — | -30 °C | — | — |
| Maximum operating temperatureTmax | — | 150 °C | — | — |
| Boundary dimensions | ||||
| Bearing widthB | — | — | 58 mm | — |
| Minimum bearing chamferr min. | — | — | 4 mm | — |
| Minimum secondary bearing chamferr1 min. | — | — | 4 mm | — |
| Roller circumscribed circle diameterEw | — | — | 243 mm | — |
| Capabilities & suitability | ||||
| Radial load capacity | — | Yes | — | — |
| Suitable for grease lubrication | — | Yes | — | — |
| Suitable for oil lubrication | — | Yes | — | — |
| Unsealed design | — | Yes | — | — |
| Catalogue reference mass | ||||
| Approximate shared-row mass — not separately stated for each rib arrangement | — | — | 17.7 kg | — |
| Classification | ||||
| Official Category Path | — | — | — | Cylindrical roller bearings - Single-row - NU |
| Official Classification 1 | — | — | — | Cylindrical roller bearings / Single-row / NU |
| Official Classification 2 | — | — | — | Cylindrical roller bearings / Single-row / N |
| Construction | ||||
| Single-row construction type | — | — | N | — |
| Rib arrangement | — | — | Two inner-ring ribs; ribless outer ring | — |
| Standard cage material | — | — | Machined brass | — |
| Standard cage marking | — | — | M | — |
| Other cage codes listed for this catalogue row | — | — | None listed in this row | — |
| Precision — designation omission rule | — | — | ISO Normal when no precision suffix is specified | — |
| Clearance identification — verify interchangeability | — | — | No clearance suffix shown. CN omission applies to interchangeable designs; do not infer a numerical clearance. | — |
| Optimized crowning note | — | — | No optimized-crowning asterisk on this row | — |
| Dimensions | ||||
| Minimum chamfer dimensionr1 min | — | 4 mm | — | — |
| Minimum chamfer dimensionr1 min | — | 0.157 in | — | — |
| Axial displacements1 | — | 3.5 mm | — | — |
| Axial displacements1 | — | 0.138 in | — | — |
| Raceway diameter outer ringE | — | 247 mm | — | — |
| Raceway diameter outer ringE | — | 9.724 in | — | — |
| Engineering — Abutment dimensions | ||||
| Diameter of spacer sleeved a | max. 243 mm | — | — | — |
| Diameter of housing abutmentD a | max. 262 mm | — | — | — |
| Radius of filletr a | max. 3 mm | — | — | — |
| Radius of filletr b | max. 3 mm | — | — | — |
| Engineering — Calculation data | ||||
| SKF performance class | SKF Explorer | — | — | — |
| Minimum load factork r | 0.12 | — | — | — |
| Limiting valuee | 0.2 | — | — | — |
| Calculation factorY | 0.6 | — | — | — |
| Engineering — Dimensions | ||||
| Shoulder diameter of inner ringd 1 | ≈ 181 mm | — | — | — |
| Raceway diameter of outer ringE | 247 mm | — | — | — |
| Chamfer dimensionr 1,2 | min. 4 mm | — | — | — |
| Chamfer dimensionr 3,4 | min. 4 mm | — | — | — |
| Permissible axial displacements | max. 3.7 mm | — | — | — |
| Load ratings — standard cage | ||||
| Basic dynamic radial load ratingCr | — | — | 685000 N | — |
| Basic static radial load ratingC0r | — | — | 665000 N | — |
| Logistics | ||||
| Product net weight | 17.9 kg | — | — | — |
| eClass code | 23-05-09-01 | — | — | — |
| UNSPSC code | 31171505 | — | — | — |
| Lubrication-qualified speed — standard cage | ||||
| Thermal speed rating — oil bath | — | — | 2600 r/min | — |
| Mechanical limiting speed — forced oil circulation | — | — | Not stated in this catalogue row | — |
| Limiting speed — grease | — | — | 2200 r/min | — |
| Limiting speed — oil bath | — | — | 2600 r/min | — |
| Main Dimensions & Performance Data | ||||
| Basic dynamic load rating, radialCr | — | 720,000 N | — | — |
| Basic dynamic load rating, radialCr | — | 161,870.504 lbf | — | — |
| Basic static load rating, radialC0r | — | 720,000 N | — | — |
| Basic static load rating, radialC0r | — | 161,870.504 lbf | — | — |
| Fatigue load limit, radialCur | — | 115,000 N | — | — |
| Fatigue load limit, radialCur | — | 25,854.317 lbf | — | — |
| Limiting speed for grease lubricationnG Grease | — | 3,600 1/min | — | — |
| Limiting speed for oil lubricationnG Oil | — | 4,250 1/min | — | — |
| Manufacturer Identity | ||||
| Schaeffler Product Code | — | 367753 | — | — |
| Official Class Key | — | — | — | 040-010-000 |
| Base Type | — | N326 | — | — |
| Gpsd Group | — | F01 | — | — |
| Product Line Id | — | 63 | — | — |
| SAP material number | — | 0192189150000 | — | — |
| Base product | — | 2305090101 | — | — |
| Bearing X designation | — | N326-E-XL-M1 | — | — |
| Mounting Manager ID | — | N326-E-XL-M1 | — | — |
| Grease application ID | — | N326-E-XL-M1 | — | — |
| Mounting dimensions | ||||
| Diameter shaft shoulderda | — | 147 mm | — | — |
| Diameter shaft shoulderda | — | 5.787 in | — | — |
| Diameter of housing shoulderDa | — | 263 mm | — | — |
| Diameter of housing shoulderDa | — | 10.354 in | — | — |
| Maximum recess radiusra1 max | — | 3 mm | — | — |
| Maximum recess radiusra1 max | — | 0.118 in | — | — |
| Mounting dimensions — shown arrangement | ||||
| Minimum shaft shoulder diameterda min. | — | — | 146 mm | — |
| Maximum housing shoulder diameterDb max. | — | — | 264 mm | — |
| Minimum housing shoulder diameterDb min. | — | — | 247.5 mm | — |
| Maximum adjacent fillet radiusra max. | — | — | 3 mm | — |
| Maximum secondary adjacent fillet radiusrb max. | — | — | 3 mm | — |
| Product characteristics | ||||
| Tolerance classPN | — | Normal (ISO 492:2023) | — | — |
| Change markE | — | Increased Capacity Design | — | — |
| Radial internal clearanceCN (Group N) | — | Normal internal clearance | — | — |
| Number of rows1 | — | Single-row design | — | — |
| Product identity | ||||
| Official product category | Cylindrical roller bearings | — | — | — |
| Official taxonomy path | /products/rolling-bearings/roller-bearings/cylindrical-roller-bearings/single-row-cylindrical-roller-bearings | — | — | — |
| Structure group ID | BC1_001_101 | — | — | — |
| Available from SKF | Yes | — | — | — |
| Remanufacturable | No | — | — | — |
| Product Identity | ||||
| Construction | — | Cylindrical roller bearing N3..-E-M1, with cage, single row, non-locating bearing, 0 ribs on outer ring, 2 rib on inner ring, type N3 | — | — |
| Short Description | — | Cylindrical roller bearing | — | — |
| Properties | ||||
| Bearing part | Complete bearing | — | — | — |
| Axial displacement capability | In both directions | — | — | — |
| Number of rows | 1 | — | — | — |
| Locating feature, bearing outer ring | Without | — | — | — |
| Bore type | Cylindrical | — | — | — |
| Number of flanges, outer ring | 0 | — | — | — |
| Number of flanges, inner ring | 2 | — | — | — |
| Loose flange | None | — | — | — |
| Radial internal clearance | CN | — | — | — |
| Tolerance class | Normal | — | — | — |
| Coating | Without | — | — | — |
| Relubrication feature | Without | — | — | — |
| Indicative carbon footprint for new product | 66.1 kg CO 2 e | — | — | — |
| Technical Data | ||||
| d | — | — | — | 280 mm |
| Bore Diameter (D) | — | 130 mm | — | — |
| B | — | — | — | 58 mm |
| Outside Diamater (D) | — | 280 mm | — | — |
| R(Min.) | — | — | — | 4 mm |
| Total Width (B) | — | 58 mm | — | — |
| R1(Min.) | — | — | — | 4 mm |
| Basic Dynamic Load Rating, Radial (Cr) | — | 720,000 N | — | — |
| Ew | — | — | — | - mm |
| Basic Static Load Rating, Radial (C0R) | — | 720,000 N | — | — |
| Basic Load Ratings : Cr | — | — | — | 699 kN |
| Operating Temperature Min. (Tmin) | — | -30 °C | — | — |
| Basic Load Ratings : C0R | — | — | — | 667 kN |
| Limiting Speed For Grease Lubrication (Ng Grea) | — | 3,600 1/min | — | — |
| Fatigue Load Limit : Cu | — | — | — | 85.7 kN |
| Minimum Diameter Shaft Shoulder (Da) | — | 147 mm | — | — |
| Limiting Speeds(Grease Lub.) | — | — | — | 2100 min-1 |
| Limiting Speed (Ng Oil) | — | 4,250 1/min | — | — |
| Limiting Speeds(Oil Lub.) | — | — | — | 2700 min-1 |
| Operating Temperature Max. (Tmax) | — | 150 °C | — | — |
| Sd1 | — | — | — | - mm |
| Axial Displacement (S1) | — | 3.5 mm | — | — |
| B1 | — | — | — | - mm |
| Maximum Diameter Of Housing Shoulder (Da) | — | 263 mm | — | — |
| B2 | — | — | — | - mm |
| Minimum Chamfer Dimension (R1 Min) | — | 4 mm | — | — |
| Da(Min.) | — | — | — | - mm |
| Maximum Recess Radius (Ra1 Max) | — | 3 mm | — | — |
| Dc(Min.) | — | — | — | - mm |
| Raceway Diameter Outer Ring (E) | — | 247 mm | — | — |
| Dd(Min.) | — | — | — | - mm |
| Fatigue Load Limit, Radial (Cur) | — | 115,000 N | — | — |
| Da(Max.) | — | — | — | 264 mm |
| Db(Max.) | — | — | — | - mm |
| Db(Min.) | — | — | — | - mm |
| Ra(Max.) | — | — | — | 3 mm |
| Rb(Max.) | — | — | — | 3 mm |
| Temperature range | ||||
| Operating temperature min.Tmin | — | -30 °C | — | — |
| Operating temperature min.Tmin | — | -22 °F | — | — |
| Operating temperature max.Tmax | — | 150 °C | — | — |
| Operating temperature max.Tmax | — | 302 °F | — | — |
Automatic matching is a search aid, not an interchangeability declaration. Confirm the full suffix, tolerances, internal design and application limits before substitution.